PDA

View Full Version : I guess I'll start a build thread


Pages : [1] 2

vajayjay
09-08-2012, 09:39 PM
So here's my new project

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120822-00066-1.jpg

Plans are
8.8 in the rear
44 up front
My stroker with an auto
XJ leafs all around to give me roughly 12inches of stretch
and 38s

Bolted up one of my 38s to check it out. Has a spring over with an 8.8 and clears 38s, need to lower

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120908-00102.jpg

Just to rub it in abit go fuck yourself

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120908-00103.jpg

Has an antiwrap bar already(kind of)Looks like Nicks:D

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120908-00111.jpg

Opened up the 8.8 and found this, some sort of lunch box :dontknow:

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120908-00109.jpg

More to come eventually, just picked up a tranny and a set of XJ leafs today

BC_4RUNNER
09-08-2012, 09:55 PM
Doing anything with the wheelbase on it? Or is this an attempt at having something to drive to the trail again?

vajayjay
09-08-2012, 09:58 PM
Doing anything with the wheelbase on it? Or is this an attempt at having something to drive to the trail again?

Says right in the post stretching the wheelbase [f]

As for driving It still not sure yet, I'll see what happens later on

BC_4RUNNER
09-08-2012, 10:07 PM
Says right in the post stretching the wheelbase [f]

As for driving It still not sure yet, I'll see what happens later on

So sorry oh master one, the way I read it you were putting xj leafs to get 12" of droop. I guess if I was one of them Jeep guys I would have known what you meant:dontknow:

Now get it done and lets go wheelin'

Happypants
09-08-2012, 10:30 PM
Coo coo, we started on ours today too lol, and fuck u and your hoist ya bastard :D

youngun
09-08-2012, 10:34 PM
Everyone needs a hoist, i just bought one can't wait to get it all setup

Looks good

Hello Kitty
09-08-2012, 10:48 PM
:party0010: All things will change for trying to keep up with teen wolf styles

hoser
09-08-2012, 10:50 PM
millers gonna love the top off on the hot summer days[36] [36]



























oh wait he wont need a ride my truck isnt gonna break down again:vroam:

Hello Kitty
09-08-2012, 11:01 PM
millers gonna love the top off on the hot summer days[36] [36]



























oh wait he wont need a ride my truck isnt gonna break down again:vroam:

[36] All hail hoser/miller but......jj is gonna do something French like or Spanglish I bets CIA :confused0006:

Fencepostxjay
09-09-2012, 12:27 AM
it was fun ripping apart the jeep today hope you didnt forget any thing lol , and i have the rad at my house now so any time just let me know

Tinker
09-09-2012, 02:38 AM
[quote] just picked up a tranny[quote]

does michelle know?

Trailjunkie
09-09-2012, 03:16 AM
dont forget a full exo right??

procircuit
09-09-2012, 08:40 AM
[36] give er shit eh!

neumonic
09-09-2012, 10:38 AM
Better start working some more hours to fund this project haha . :D

Look forward to see the progress [36]

vajayjay
09-09-2012, 02:30 PM
Picked up some parts yesterday

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120909-00120.jpg

Took some stuff out today

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120909-00113.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120909-00117.jpg

Here is a shot of XJ leafs on a YJ

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120909-00119.jpg

:D :party0010:
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120909-00121.jpg

BC_4RUNNER
09-09-2012, 04:07 PM
Need a hand? I'm in the mood to rip a jeep apart today:D

gavman
09-09-2012, 05:52 PM
OK Cool, what colour?

vajayjay
09-09-2012, 06:55 PM
I'm thinking I should match the antiwrap bar [36]

Rebag
09-09-2012, 08:05 PM
Opened up the 8.8 and found this, some sort of lunch box :dontknow:

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120908-00109.jpg
looks like factory limited slip to me

J20
09-09-2012, 08:12 PM
yup factory LS

skyjacker
09-09-2012, 09:57 PM
Opened up the 8.8 and found this, some sort of lunch box :dontknow:

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120908-00109.jpg

That's just a factory limited slip JJ nothing special

skyjacker
09-09-2012, 09:59 PM
Opened up the 8.8 and found this, some sort of lunch box :dontknow:

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120908-00109.jpg
looks like factory limited slip to me

Bhahahahahahah not usto being the only ranger (RBV) specialist on here anymore

epic3
09-09-2012, 11:40 PM
anyone else need to tell him itrs just a limited slip?

yoda604
09-10-2012, 10:08 AM
Looks like it's gonna be a gooder.

A tip that I learned with my old YJ. Reverse your front shackle mounts, to move the shackles to the rear and hard mount up front. Will save your leaf springs in the long run. [cheers]

vajayjay
09-22-2012, 07:00 PM
Can't have new without the old

Loading the old shell onto the trailer
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120922-00165_zps2fa37c19.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120922-00166_zpsd7e83ee0.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120922-00168_zpsa9eab0db.jpg

Ready for delivery :D
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120922-00170_zpsb9c7f569.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120922-00171_zps8c139405.jpg

Big pile of parts
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120922-00167_zps4a7ab86e.jpg

A sad sad day in history :(
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20120922-00172_zpsace28312.jpg

Happypants
09-22-2012, 07:11 PM
lol bye Lexi!!

85chevy
09-22-2012, 07:44 PM
You sure ur got ur money out of that body lol

hoser
09-22-2012, 11:34 PM
[no][no][no][no][no][no][no][no]




glad i was there for its last day




159386

4skin
09-23-2012, 08:56 PM
what you didnt save the sliders

atoyot
09-24-2012, 03:51 PM
she had a good run............
.
.
..
n bruce the sliders were more bent than the jeep.....

skyjacker
09-24-2012, 11:40 PM
Should of brought it by my place could of at least run it over with the skidder like we did with nick and Doug's old jeeps :D

Hellboy
09-25-2012, 02:22 AM
RIP

New YJ shuld be cool

78bronco
09-27-2012, 01:17 AM
sweet build!! done yet ? :)

vajayjay
10-08-2012, 06:26 PM
Did abit of work today

Who knew that you could do this to a jeep :dontknow:

http://i908.photobucket.com/albums/ac282/jjtully9/parts/IMG-20121008-00215.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/parts/IMG-20121008-00216.jpg:D

I also tacked in the new rear crossmember
http://i908.photobucket.com/albums/ac282/jjtully9/parts/IMG-20121008-00217.jpg

Happypants
10-08-2012, 06:33 PM
It's neat eh!?

vajayjay
10-08-2012, 06:33 PM
Opened up my motor and all bottom end bearings seem to be toast

Pulled one cap off and found this

http://i908.photobucket.com/albums/ac282/jjtully9/parts/IMG-20121008-00214.jpg

Haven't taken any others off yet but all rods have play and so does the crank :o

Trailjunkie
10-08-2012, 06:41 PM
hurry up ! YOU DONE YET?

hoser
10-08-2012, 06:42 PM
so u should be good to go for next weekend then[36] [36]

78bronco
10-08-2012, 08:00 PM
nice i see progress ...

And i knew that you can lift a jeep body like that :D

vajayjay
10-20-2012, 05:02 PM
Designing my rear shackle hangers

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121020-00253.jpg


:D :party0010:

Happypants
10-20-2012, 05:17 PM
Done yet? I have a idea but I don't think u would wanna do it

4skin
10-20-2012, 06:16 PM
Drawing draw it on plate cut out weld done next

atoyot
10-20-2012, 06:33 PM
if u got a toyota ud be wheeling it by now............:D
.

.
......................

.
..
.
.
.
.

..
.
.
.
.

BC_4RUNNER
10-20-2012, 06:33 PM
Better make the edge of the bolt hole alot thicker, thats not going to hold up to the abuse of the JJ Tulley School of Offroad Driving.:D












































































I know I know its only a drawing and you were already going to change it but I just wanted to be "that guy" for once on someone elses build thread. [f]

hoser
10-20-2012, 07:14 PM
done yet miss hangin out with my buddy :sad


miller has been moping around alot lately too..

he hasnt been the same since that jeep rideRice

Trailjunkie
10-20-2012, 07:38 PM
done yet miss hangin out with my buddy :sad


miller has been moping around alot lately too..

he hasnt been the same since that jeep rideRice
[/quote]hes jeep spoiled now .lol

vajayjay
10-20-2012, 11:03 PM
Drawing draw it on plate cut out weld done next
That's the plan, now if only I knew someone with a plasma :dontknow:

Answer your phone:mad0217:

vajayjay
10-20-2012, 11:10 PM
Took it to the car wash tonight

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121020-00254.jpg

Much nicer without dirt and grease all over

vajayjay
10-20-2012, 11:12 PM
done yet miss hangin out with my buddy :sad


miller has been moping around alot lately too..

he hasnt been the same since that jeep rideRice
I know I'm trying to rush just so I can see you two again

4skin
10-20-2012, 11:46 PM
That's the plan, now if only I knew someone with a plasma :dontknow:

Answer your phone:mad0217:

Lol that phone don't work

vajayjay
10-20-2012, 11:48 PM
Well played

vajayjay
10-28-2012, 03:38 PM
So Finally got around to doing some more work to the jeep

Made these last weekend, but didn't like them...

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121021-00260.jpg
So I made these this weekend


http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121027-00286.jpg
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121027-00287.jpg

Built a crossmember and welded shackle hangers and tow points to it

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00289.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00291.jpg

Oh and as you can see it came apart even further:D

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00288.jpg

Crossmember in and diff hanging

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00295.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00294.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00293.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00292.jpg

And thats what 6 inches of stretch looks like :D

Hopefully more to come soon Rice

FKN MRK
10-28-2012, 03:48 PM
:D

_________________

vajayjay
10-28-2012, 05:13 PM
:D

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00296.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121028-00298.jpg

[36] :party0010:

BC_4RUNNER
10-28-2012, 05:33 PM
That front end looks WIDE or is it just the perspective?

vajayjay
10-28-2012, 05:57 PM
That front end looks WIDE or is it just the perspective?


It's still wide, needs to be narrowed. Stock chevy 44

Hello Kitty
10-28-2012, 06:15 PM
Kick ass!

But not 1 can of pop in any photos
:dontknow:

4skin
10-28-2012, 06:52 PM
Long arm kit just sayin

hoser
10-28-2012, 07:32 PM
uuummmmmmm...hurry up[cheers]

jordanbennett
10-28-2012, 09:37 PM
neeeeeaaaaaatt! right on jj [36] [36]

youngun
10-28-2012, 10:23 PM
Lookin good man

atoyot
10-29-2012, 12:16 AM
goin wheelin next weekend......

.
.
.
.will it be done by then?
.
.
.
.
.
.
.
.
.
now work faster......
.
.

procircuit
10-29-2012, 07:18 PM
Minty



Done yet

vajayjay
11-11-2012, 05:36 PM
Got a tiny bit done this weekend

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121111-00320.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121111-00319.jpg

I know its barely anything :sad

Happypants
11-11-2012, 05:37 PM
More than I've done in the past week...

Fencepostxjay
11-11-2012, 06:41 PM
and me lol

Happypants
11-11-2012, 06:42 PM
Jeep thing I guess.....

78bronco
11-11-2012, 06:52 PM
more then me as well

hoser
11-11-2012, 07:00 PM
uummmmmm u suck[16] [16]

4skin
11-11-2012, 07:45 PM
Tires are gay

Trailjunkie
11-12-2012, 01:06 PM
vajj 's finished yj??
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-snc6/230072_173994816073777_779838371_n.jpg

jnyblazer
11-12-2012, 01:46 PM
[f] well its a jeep, waiting for over night shipping from japan.....





















































looks good, might build one , they look fun,kinda [36]

hoser
11-12-2012, 01:51 PM
hey jj u want me to send over my grandma to give u a hand??

i think she could build it faster than u:vroam:

jnyblazer
11-12-2012, 02:13 PM
hey jj u want me to send over my grandma to give u a hand??

i think she could build it faster than u:vroam:


:confused0006: :dontknow: :dontknow: :dontknow: :dontknow: :dontknow: zzzzzzzzzzzzzzzzzzzzzz

C-Dog
11-12-2012, 02:15 PM
hey jj u want me to send over my grandma to give u a hand??

i think she could build it faster than u:vroam:



lol

procircuit
11-12-2012, 03:06 PM
hey jj u want me to send over my grandma to give u a hand??

i think she could build it faster than u:vroam:

lol lol lol lol

vajayjay
11-12-2012, 07:13 PM
That's close to it Doug :D

Yes Derek please do oh yeah

Trailjunkie
11-12-2012, 07:35 PM
Quote:
Originally Posted by hoser http://www.funinbc.com/forum/images/approx/buttons/viewpost.gif (http://www.funinbc.com/forum/showthread.php?p=1678857#post1678857)
hey jj u want me to send over my grandma to give u a hand??

i think she could build it faster than u:vroam:
thats awshum derick

Happypants
11-12-2012, 07:38 PM
got more done today than u :D

vajayjay
11-12-2012, 07:41 PM
I worked 9 hrs of Double time today :( [36]

dirka dave
11-12-2012, 08:22 PM
Been of for 4 days.

Taking tomorrow off.

Tunabomber
11-12-2012, 11:36 PM
holy hell vajaygay that thing is going to be cool

the rear winch and rear crossmember is a difinate fix to a stock jeep weak point

do you think the spring mounts at the rear are beefy enough ??? ( given the driver ) just sayn

atoyot
11-14-2012, 01:00 AM
page 6 sux without pixx.....:)


so [cheers]


.
.

vajayjay
11-18-2012, 02:59 PM
A few new peices oh yeah

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121118-00334.jpg

vajayjay
11-18-2012, 02:59 PM
holy hell vajaygay that thing is going to be cool

the rear winch and rear crossmember is a difinate fix to a stock jeep weak point

do you think the spring mounts at the rear are beefy enough ??? ( given the driver ) just sayn


We'll find out some day :D :o

Fencepostxjay
11-18-2012, 03:15 PM
nice to see some one make some progress , but still , are you done yet ? lol

vajayjay
11-18-2012, 06:09 PM
And I did something with the new stuff

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121118-00336.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121118-00335.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121118-00337.jpg

I know barely anything done again :(

You're grandma never showed up Derek :dontknow:

4skin
11-19-2012, 08:54 AM
Pinion angle looks a little steep

procircuit
11-19-2012, 08:54 AM
Pinion angle looks a little steep

lol lol lol lol

vajayjay
11-19-2012, 09:12 PM
Pinion angle looks a little steep


I'll look into that, but you can see I have the front diff set in place

hoser
11-19-2012, 10:06 PM
sorry granny has been busy latley:(

i see your going with the synthetic winch rope[36]

C-Dog
11-19-2012, 11:39 PM
I'll look into that, but you can see I have the front diff set in place






lol

skyjacker
11-20-2012, 12:03 AM
Looking good JJ [cheers]

4skin
11-20-2012, 12:20 AM
Good wheel base for turning left
Right and straight could be a problem
But you could do donuts like a boss

Hellboy
11-20-2012, 01:21 AM
this thread got pretty funny lol lol

atoyot
11-20-2012, 01:34 AM
I'll look into that, but you can see I have the front diff set in place


.
.
...

.Rice

.
.

vajayjay
11-20-2012, 05:21 AM
sorry granny has been busy latley:(

i see your going with the synthetic winch rope[36]


You inspire me oh yeah

vajayjay
11-24-2012, 09:07 PM
Todays work

Made new top brackets for my U-bolt flip, same as before just the holes are cut more even.

And started filling in the hole in the crossmember, still have to do the top and smooth out abit more

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121124-00358.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121124-00359.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121124-00360.jpg

Hopefully more to come tomorrow :cool:

Happypants
11-24-2012, 09:24 PM
oooooh shiney

atoyot
11-26-2012, 12:08 AM
ohhhhhhhh custom
.
.
.

vajayjay
11-27-2012, 08:26 PM
Shiny new parts :party0010: :party0010: :party0010: [36] [36] [36]

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121127-00379.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121127-00378.jpg

Now I just need to take my 231 apart and put half of it in there.

So the back half with a SYE on it is not needed :confused0006:

Thanks again B [49] :WTF

Trailjunkie
11-27-2012, 11:20 PM
mmmmm shiny

4skin
11-28-2012, 12:31 AM
Ohh nice so shiny

78bronco
11-28-2012, 12:47 AM
umm so if only half your t-case goes in there does that mean you only have rear wheel low and high? or only half a t-case with no output ?? ;p

4skin
11-28-2012, 11:30 AM
No think his Dana 300 goes behind it

vajayjay
11-28-2012, 09:32 PM
No think his Dana 300 goes behind it

Winner winner

This takes the stock 231 gears then my 300 will bolt to it causing a doubler :D

231=2.62:1

300=2.72:1
low low should =7.12:1 :party0010:

Oh and front digs will be possible too

Happypants
11-28-2012, 09:33 PM
Yeaaaaahhhhh buddy!!

Reeseman
11-29-2012, 01:05 PM
That is sexy!!

DIRTDIGGLER
11-29-2012, 01:14 PM
You bastard [cheers]

Happypants
11-29-2012, 01:43 PM
Ur never gonna use low low thou lol, we don't in the cj with just the 4:1 lol but it is nice to have when u do need it

procircuit
11-29-2012, 02:49 PM
Ur never gonna use low low thou lol, we don't in the cj with just the 4:1 lol but it is nice to have when u do need it
i always use low low low.. but your cj doesn't leave the driveway? hehe

DONE YET!

Happypants
11-29-2012, 02:51 PM
Yup it is done, just working on the tow rig, Jeeze dumbass!! I was done a few weeks ago

vajayjay
11-29-2012, 05:46 PM
i always use low low low.. but your cj doesn't leave the driveway? hehe

DONE YET!

But you need low low to make up for your lack of power

Happypants
11-29-2012, 05:55 PM
But you need low low to make up for your lack of power

ZZZZZZZZZZIIIIINNNNG!

procircuit
11-29-2012, 06:43 PM
But you need low low to make up for your lack of power

Well played:fighting0071: lol

vajayjay
12-04-2012, 07:58 PM
Since FIBC was down yesterday I had to find something to do, so I destroyed my T-case :D

Heres a stock 231 with a SYE, around 15 inches

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121203-00385.jpg

Opened case up, it was in way better shape than I thought

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121203-00386.jpg

Here's the part I need, but how to get it out :dontknow:

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121203-00387.jpg

With a grinder

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121203-00388.jpg

And a hammer

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121203-00389.jpg

Now it has to go in here

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121203-00390.jpg

That was not an easy job, Thanks JTC for the help[d]

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121204-00396.jpg

Out of everything in the 231 this is all I need

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121204-00400.jpg

And here it is mocked up to the 300, its about 17inches now

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20121204-00399.jpg

Kit comes with all the hardware and seems like it will go together pretty easily

hoser
12-04-2012, 08:11 PM
shat i didnt realize u were still on this project......from the lack of progress i thought u had given up asshole2

Happypants
12-04-2012, 08:22 PM
That's pretty!

85chevy
12-04-2012, 09:12 PM
All that just to get the planetary gear set?:dontknow:

vajayjay
12-05-2012, 12:14 AM
All that just to get the planetary gear set?:dontknow:


Yup :D

procircuit
12-05-2012, 08:48 AM
get er done...



is it done yet...




how about now...




im goin wheelin sunday.... gonna be done by then??

epic3
12-05-2012, 08:29 PM
whats that doubler worth?

4skin
12-05-2012, 10:56 PM
That's a slick setup

B
12-05-2012, 11:04 PM
whats that doubler worth?


about 800 [cheers] very reasonable u can run a 231 behind it as well if u wanted or a 205 or many options available

85chevy
12-05-2012, 11:13 PM
Was it just pressed into that housing? Or would of pair of heel bars gotten it out?:dontknow:

B
12-05-2012, 11:45 PM
they are a press fit yes there is a removal tool but i dont believe press bars or heel bars would manage it ....

skyjacker
12-05-2012, 11:51 PM
Nice doubler I'll be doing one of them in the new year:D

vajayjay
12-22-2012, 09:05 PM
Just to make people think I did something :D go fuck yourself :(

4skin
12-25-2012, 01:08 PM
Your build thread sucks as much as mine
















Maybe more because its a jeep

vajayjay
01-06-2013, 05:22 PM
I did some work today :eek:

Started with my trailer, for those of you who have had the privlage of borrowing my trailer, or those of you who have gotten towed home while my jeep was left at the cabin. Know that the ramps for every other vechicle besides mine get in the way.
So I built some ramp holders

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130106-00434_zpsb5f58d1a.jpg

Then I actually worked on the jeep

Picked up a block for mock-up, and I mocked it up

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130106-00430_zps0177d72c.jpg

The 300 is just sitting there, not actually bolted to anything

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130106-00433_zps908a4070.jpg

Looks like driveshaft will be roughly 19"

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130106-00431_zps96a6c83d.jpg

And got a 44 housing and kind of mocked it up as well

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130106-00436_zps23ac3cad.jpg

Going to try and keep diff here, front of tire in line with front of frame or maybe move forward abit more :D

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130106-00435_zpse5a8c278.jpg

Maybe more to come in the future :dontknow:

hoser
01-06-2013, 05:40 PM
thanks the trailer should work better for me now[cheers]


probably wont need it again tho:D

Trailjunkie
01-06-2013, 06:43 PM
DONE YET!!!!

skyjacker
01-06-2013, 06:58 PM
Looks like some heavy duty crazy work shitalky going on right there lol

vajayjay
01-12-2013, 09:56 PM
Some more progress

Got started on the front end today, moving the steering box as far forward as I can

Cut, cut, grind, grind, weld, weld...

First to go was the stock crossmember along with all stock mounts that will not be used

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130112-00439_zps4aa544f6.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130112-00440_zps02d25510.jpg

Then to fill in the holes

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130112-00441_zps25733756.jpg

What hole :dontknow:

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130112-00442_zps27543d53.jpg

Now for the new holes

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130112-00443_zpsd2985077.jpg

All for a new smaller crossmember

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130112-00444_zpsc6f7103f.jpg

I got the steering box moved too, but my battery died. Got the box 2.5" forward. Will put up more pics tomorrow. Have to weld everything back together tomorrow

Happypants
01-12-2013, 11:23 PM
Looking good bud

atoyot
01-13-2013, 12:08 AM
Nice ramps!!!!
trailer is lookin great!!!
reflectors are nice and reflecty.........:party0010: .
.

.
.wanna go wheelin?

.
.
..
.
..
.
.
.
.
.

..
.
tumbleweed
.
..
.

.
.

.

.
.
.
.

BC_4RUNNER
01-13-2013, 09:18 AM
Looks like a good start JJ. Will it be ready for Febuary?

vajayjay
01-13-2013, 10:22 AM
Looks like a good start JJ. Will it be ready for Febuary?


:happy0045: :happy0045: :happy0045: I wish :( [16]

vajayjay
01-13-2013, 05:34 PM
Not much work today

Burned in yesterdays project

I just left the original holes
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130113-00445_zps4645dbce.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130113-00446_zpsd265669e.jpg

Front diff kinda sitting in place (see the pile of stuff I've cut off the frame so far:D )

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130113-00447_zps58d0be74.jpg

No turning back now removed the leaf hangers

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130113-00448_zpsecf6633f.jpg

big billy llh
01-13-2013, 09:17 PM
lookin good bud get her done?

procircuit
01-13-2013, 09:29 PM
Wah. Who

vajayjay
01-25-2013, 06:56 PM
:D

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130125-00467_zps4c9151bf.jpg

Happypants
01-25-2013, 07:09 PM
Sweeeeeeeet!!!
Lemme know if u need a hand,

vajayjay
01-25-2013, 07:34 PM
forgot these

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130125-00468.jpg

:party0010:

Happypants
01-25-2013, 07:54 PM
Pretty

Hellboy
01-25-2013, 08:24 PM
coooool

85chevy
01-25-2013, 09:35 PM
Damn its christmas in Jan[cheers]

C-Dog
01-27-2013, 07:55 AM
Sweet shit JJ gotta love new parts....












Lets see that Diff together and hung under Jeep Brah lol [36]

vajayjay
01-27-2013, 12:01 PM
Picked up another 8.8, to use because the housing that came with the truck is scetchy

Had a little issue this morning trying to pull the axles. The bolt for the pin snapped, but I got the pin out :D

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130127-00471.jpg

Now to start grinding perches and stuff off again :ballsmack

Happypants
01-27-2013, 01:15 PM
sweeeeeeeeeeeeeeeeeet.

vajayjay
01-27-2013, 01:55 PM
:D

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130127-00472.jpg

:s30x:

Happypants
01-27-2013, 02:16 PM
Woooo tuna doors?

vajayjay
01-27-2013, 02:54 PM
Woooo tuna doors?


yup, they don't even know whats coming

SHITTY
01-27-2013, 04:37 PM
yup, they don't even know whats coming


neither do the trees

Happypants
01-27-2013, 04:39 PM
Thoes poor poor doors.....there never gonna be the same

atoyot
01-27-2013, 06:44 PM
atleast they will be offroadin........

..
.hahaahha


annnnnnnnnd ZING!!!!
...

Punk in Drublic
01-27-2013, 06:55 PM
something tells me that those doors will never see armour all again

Happypants
01-27-2013, 07:33 PM
Or be that straight ever again lol

4skin
01-27-2013, 08:00 PM
There not bent till you hit it while shifting

vajayjay
01-28-2013, 05:15 PM
Langley U-blast is fun

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130128-00473.jpg

:D

4skin
01-28-2013, 06:52 PM
Your not actually trying to make it Purdy are you
The armour all on those Doors has infected you
It's going to be the replacement armor all jeep p

vajayjay
01-28-2013, 08:27 PM
Your not actually trying to make it Purdy are you
The armour all on those Doors has infected you
It's going to be the replacement armor all jeep p


I'm going to get the magnetic body panels to, so I don't get it all scratched up

atoyot
01-28-2013, 10:25 PM
at this rate its never gonna be done.....

.when does it go to the chrome shop?.

..
.
.

Happypants
01-28-2013, 10:33 PM
I'm sure Jj will be done before tuna lol

vajayjay
02-01-2013, 03:40 PM
Pulled the long axle out of the chev 44 and lined up to the new waggy axle

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130201-00479_zps886a9c04.jpg

Looks like I need to take 3 inches out of the housing

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130201-00482_zps517daccb.jpg

:party0010:

atoyot
02-01-2013, 03:46 PM
shaft........
.
.
.
..

.
..
.
.

.whos shaft

.

..

.

.
.shaft

..
.

whatcha talkin bout
.
..
.
.

.
.
.
.shaft!.

.

Trailjunkie
02-01-2013, 04:19 PM
did you say shaft??












who getting the shaft??

Always broke
02-01-2013, 06:14 PM
Did somebody get shafted?

vajayjay
02-01-2013, 06:28 PM
So I'm learning more every minute,

I have a passenger drop widetrak waggy 44 and a chevy 44. Turns out the waggy long side is 13/16 shorter than the chevy 44, so at this moment I think I have to shorten the waggy housing 2 3/8 on the long side of the waggy housing

and heres a pic of short side shafts from top to bottom
chevy 44
waggy widetrak 44
new waggy narrowtrak 44

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130201-00485_zps6eaefff2.jpg

At this moment I think I need to take 1 7/8 off the short side of the waggy housing

More measuring and thinking to come :dontknow:

There will be a chevy 44 available shortly everything there, including studded tires

vajayjay
02-01-2013, 06:30 PM
Vagina talking about shafts oh yeah :roll eyes

atoyot
02-01-2013, 10:50 PM
nice flower pot.
.

.SHAFT!
.
.
..

.
..
bowchica wow chica bow bow


shaft.

..

homeboy
02-02-2013, 01:07 AM
get cut to length chromos yukons?

vajayjay
02-02-2013, 02:12 AM
get cut to length chromos yukons?


I got narrow trak waggy chromos

4skin
02-02-2013, 10:15 AM
So you should be used to hearing your shaft is to short lol

vajayjay
02-03-2013, 11:35 AM
Getting the 8.8 ready for the super 88 kit

Here's the housing that came with the tub, it had a piece of plate welded to the housing where the U-bolts go, so I was curious why it was there

Here's what I found

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130203-00494_zps3053819a.jpg

So I got another housing and started again by cleaning off all the mounts, then sandblasting it oh yeah mainly so I could see the shoulder I had to cut down to for the kit

Here's the end of the tube, need to cut off flush to the shoulder

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130203-00490_zpsc3851510.jpg

Cutting

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130203-00488_zpsb38d74d7.jpg

Here's what came off

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130203-00493_zps36861f02.jpg

And ready

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130203-00491_zps24906ea8.jpg

Oh and for those who care, my finger still hurts, but not to bad

Happypants
02-03-2013, 11:45 AM
Sooo u done yet?

vajayjay
02-03-2013, 03:38 PM
Oh its on now

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130203-00495_zps088bb468.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130203-00496_zps99f891ea.jpg

All this for 1 7/8" on this side

vajayjay
02-22-2013, 05:01 PM
Look I finally did something

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130222-00535_zpsd19e7bc2.jpg

And I'll let it cool

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130222-00536_zps30fcced3.jpg

Now to cut the other side off [16]

atoyot
02-22-2013, 05:43 PM
i think u need more shop space.....(said in a sarcastic tone)
fuck i can barely open my doors.....

u can thow a hammer n not hit ur walls....:D
.
.
.
.

Honky
02-22-2013, 06:02 PM
Hotdog down a hallway?

harvester_sorrow
02-22-2013, 07:49 PM
your diff is gonna be itchy

vajayjay
02-22-2013, 09:21 PM
It deserves it after smashing my finger

78bronco
02-22-2013, 10:43 PM
looks good

4skin
02-23-2013, 02:05 AM
i think u need more shop space.....(said in a sarcastic tone)
fuck i can barely open my doors.....

u can thow a hammer n not hit ur walls....:D
.
.
.
.

Doors since when did your tent have doors :dontknow:
well I guess the gate is kind of a door

vajayjay
02-23-2013, 03:04 PM
Start making progress and boom, the other side comes off

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130223-00541_zpsd4946e88.jpg

:D [16]

FKN MRK
02-23-2013, 04:34 PM
Doors since when did your tent have doors :dontknow:
well I guess the gate is kind of a door

lol Me thinks he means the doors on da truck ;)

4skin
02-23-2013, 05:42 PM
lol Me thinks he means the doors on da truck ;)

Could have a point there mark

atoyot
02-23-2013, 07:11 PM
annd mark for the win........
.

.silly bruce

.
.
.

vajayjay
03-05-2013, 08:08 PM
I did nothing last weekend

Plan on putting front diff back together this weekend [36]

harvester_sorrow
03-05-2013, 08:29 PM
get on it[whip]

vajayjay
03-09-2013, 08:17 PM
oh yeah

Now that this is done

This side went almost too easy. Heated the inner up and about three hits and it was on :dontknow:
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130309-00574_zpsbc7886aa.jpg

My jig I made this time ready to smash the s^$t out of it like last time, but this time have it not move
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130309-00575_zps2bc7a868.jpg

All wrapped up
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130309-00576_zps83ab3294.jpg

Guess I need to do some work now :eek:

hoser
03-09-2013, 08:27 PM
is that a boat:confused0006:

vajayjay
03-09-2013, 08:28 PM
Yup, but I like yours better

vajayjay
03-10-2013, 12:27 PM
Heres what came off

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130309-00577_zps490b9989.jpg

1 7/8 off the short side and 2 3/8 off the long side

Hopefully its all good :dontknow:

Shite in a bucket
03-10-2013, 04:39 PM
So nice little project bud, but WHY do all that to a fucking jeep?

vajayjay
03-10-2013, 04:45 PM
And abit more progress today

Got my truss trimmed down to gain more room

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130310-00579_zpsc9b20e79.jpg

Since Bruce wouldn't answer his phone I had to use my Oxy/Acetylene
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130310-00580_zps9acad388.jpg

The side pieces were flush to the top before I started
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130310-00581_zpsa7692aa0.jpg

Now I need some more parts, then I can start full mockup/build[36]

Happypants
03-10-2013, 05:23 PM
Sweeet

FKN MRK
03-10-2013, 05:28 PM
[cheers] atta boy!

FKN MRK
03-10-2013, 05:30 PM
So nice little project bud, but WHY do all that to a fucking jeep?


:dontknow: Doesnt he know???:confused:



























































:confused0006: Silly Newb lol






















































JEEPS ARE NEAT!!:party0010:

Happypants
03-10-2013, 05:38 PM
Jj make sure u head that pumpkin up good before we burn that on, or u might pull a chopstick lol

Casselman
03-10-2013, 06:15 PM
looks good JJ, thanks from dropping by Saturday with the torch [cheers]

fullsizebronco
03-10-2013, 11:05 PM
nice project!

Happypants
03-10-2013, 11:12 PM
Ima be calling u to shorten a dana 60 now :D......just sayin....:P

78bronco
03-22-2013, 03:37 PM
looking good jay

now hurry up so you can come finish mine please

vajayjay
03-22-2013, 11:07 PM
Picked up some parts and actually did some work tonight :WTF

Got my Truss down low enough that I think I'm happy

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130322-00602_zps72afc4e1.jpg

Got my Synergy Ball joints today, so was able to put together the knuckles and get them on somewhat

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130322-00603_zpsa337b307.jpg

Along with the high steer arms

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130322-00604_zps894e973e.jpg

Also got my TREs and some tubing to make my steering, tapped the tubing

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130322-00608_zps1ba2049c.jpg

And made my tie-rod

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130322-00609_zpsacc8969a.jpg

:D :party0010:

Might even get the diff somewhat under the truck tomorrow and start looking at the links Rice

Happypants
03-22-2013, 11:15 PM
Looking good dood! If u need a hand with anything Gimmie a shout

C-Dog
03-22-2013, 11:18 PM
Fkn eh JJ looking good dood oh yeah

atoyot
03-22-2013, 11:40 PM
i see some bare metal.....
i bet ur next post is gonna be u re-primerizing it....,,,,,,

.
.

.
.
.still looks unfinished in person......:D Rice .:rain cloud :pet [cheers] .....

.
.
..
.

..
.
. ur gonna get use to ridin in toys while ur buildin.......
by the time ur done, ur gonna have to scrap the cj tub an put a toy tub on it just so it feels right..... hahaaahahaa
.

.
..
.

.
.
.buildy buildy buildy.....



.lil motivation pixx for ya....



buildy buildy buildy.

.
.
.
.
.

FKN MRK
03-23-2013, 12:20 AM
[cheers] Work faster! :D

Fencepostxjay
03-23-2013, 04:12 AM
Jj what you figure the drag link and cross over cost to make with tre's ? Looking at a drilled set from states w/tres ready to go. No weld in bungs .250 tube , and what balljoints did you get ? Any thing special for the Reid knuckles ? I figure when I do the steering I should just do the joints too and if timing and money line up will be doing the 5-5.5 swap aswell

vajayjay
03-23-2013, 08:42 AM
Ah the good old Mangenta hatch days. That was a fun day up Norrish [36]
And it's not a CJ tub its a YJ [16]





I got these balljoints
http://synergysuspension.com/Synergy-Suspension-D30-D44-D60-Heavy-Duty-Front-Ball-Joint-Sets-p-26182.html

As for the steering I only bought the TREs so far and will just get some tubing tapped when I figure out the lengths. Only thing I needed done was have the taper put on the other side of the inverted T end, which my buddies at JTC(:D) took care of.

Fencepostxjay
03-23-2013, 09:19 AM
Thanks. Let me know. When you figure it out. Cause. Have a guy here that builds high steers. And said he couldn't do it for the price I found. So it would be interesting to know.

vajayjay
03-23-2013, 09:53 PM
So I got more work done today :eek:

First my day started with finally finishing getting some heat in the shop, now thats it warm out [16]

Got this heater fired up [36]

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00611_zps57863d8a.jpg

Who's shop has three thermostats :D

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00610_zps0a1d5a58.jpg

Still have to run the venting through the roof for the two infrared heaters

Heated up the truss and bent the top down so the sides are flush to the top

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00612_zpscc559026.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00613_zpsc3ae7db2.jpg

Then I had to move the diff all the way over to the jeep and after it hurt me once I wasn't going to let that happen again go fuck yourself

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00614_zps6f1919b3.jpg

Got diff all lined up with the steering and set it at full bump, and made up some links

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00615_zpse73ffb03.jpg

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00617_zpse87f5b96.jpg

Looks like my steering is going to make the bump height

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00619_zpsd9c26963.jpg

The draglink isn't in the pitman arm all the way, need to get another one and get it reamed, so it will go up about an inch once done

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130323-00620_zpsce7aed00.jpg

Maybe more to come, have to figure out if the links are too far out and going to rub, but the passenger side only has enough tube to fit the mount unless I trim it and put it part way on the cast

vajayjay
04-06-2013, 12:00 PM
Did a little work lately

Putting an xj tranny in a yj causes a slight problem, the mounts are different

Welded my old xj mount to the new yj mount

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130329-00630_zps6f8a04cf.jpg
Then cut the xj mount off

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130329-00631_zps31e251f6.jpg

Decided to ditch the rear leafs now and stretch it even more

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130404-00641_zpsd4495bd7.jpg

Going to be around 104"
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130404-00642_zps8bc832f2.jpg

And got rid of some PVC

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130404-00643_zps4a6fd3cd.jpg

Happypants
04-06-2013, 12:08 PM
Cooooool mang!

4skin
04-06-2013, 01:01 PM
Vag rethink the trans mount that is a part you don't want weird
When you break it and you will you want to be able to go buy one and bolt it in
Sucks if you're in whipsaw or someplace and need to fix it to get home
And the part don't bolt in

Tinker
04-06-2013, 02:01 PM
its only the tailshaft thats different, i have a xj transmission in my yj ;) or was it the bell housing aww shit now i cant remember....but i do know its a xj transmission in mine lol lol lol

4skin
04-06-2013, 02:08 PM
Think vagina is using a auto though batman

Happypants
04-06-2013, 02:17 PM
Yea he is, auto and 5speed mounts are different,

vajayjay
04-06-2013, 08:02 PM
I'm gonna change the whole crossmember so I was thinking of using a stock xj mount and build crossmember to fit.

procircuit
04-07-2013, 08:55 AM
[36]:party0010:

78bronco
04-07-2013, 10:09 AM
looken good

BC_4RUNNER
04-07-2013, 10:30 AM
So you linking the rear now too?

atoyot
04-07-2013, 11:56 AM
... ur new massive hauler truk and empty trailer must just feel unused.:o ..
they must be sad....
i got an idea
lets tow my toy somewhere n go wheelin...:D ...........
.
.
.
.

HEAVY METAL
04-07-2013, 12:48 PM
very cool !!

Happypants
04-07-2013, 12:52 PM
where you get your steering tapped?

vajayjay
04-07-2013, 01:01 PM
Greg= Yes

Chris= Yes

Dean= Oh you know it YO

Nick=JTC

vajayjay
04-07-2013, 05:05 PM
I redrilled the crossmember to fit a stock xj mount, ditched a big chunk of crossmember thats just in the way for now

Stock crossmember
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130407-00644_zps115934b1.jpg

Took the center out
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130407-00645_zpsb349ef79.jpg

I'll just use this part for now until I build a new one with some protection added on
http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130407-00647_zps26145696.jpg

vajayjay
04-13-2013, 04:25 PM
Took some more metal off

Rear leaf mounts gone, stock shock mounts gone, crossmember that someone added gone

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130413-00671_zps8936373c.jpg (http://s908.photobucket.com/user/jjtully9/media/IMG-20130413-00671_zps8936373c.jpg.html)

And the first thing I did to this project Gone

http://i908.photobucket.com/albums/ac282/jjtully9/IMG-20130413-00672_zpsab7f3149.jpg (http://s908.photobucket.com/user/jjtully9/media/IMG-20130413-00672_zpsab7f3149.jpg.html)

Now just need some tubing and the rear link kit and a whole lot more[16] :(

Happypants
04-13-2013, 04:33 PM
Cut cut weld cut cut weld cut weld cut weld cut weld cut weld cut weld cut weld cut cut weld weld cut cut weld weld lol

Trailjunkie
04-13-2013, 04:54 PM
lol thats about it. will be well worth it.

Happypants
04-13-2013, 04:55 PM
Yuuuuuup

4skin
04-14-2013, 11:29 AM
Hey tape up that shifter hole on the doubler before you fill it full of grinding shite

vajayjay
04-14-2013, 11:33 AM
It's empty, everything is going to get a full cleaning when getting put back together

Tinker
04-14-2013, 01:01 PM
Uh oh......I think someone is falling in love with the build.

atoyot
08-26-2013, 10:52 PM
was lookin through some old pixx found this pic of an abandoned jeep in the woods looks like all the windows are smashed n it got abused b4 it got left....
.
.
.
.











oh wait thats just ur old jeep.......................... we were wheelin...:)

looks all abondoned though hahahahahaahahah
and thats not at her worst[36] [36] .
.
.

...
..
.
.

4skin
08-26-2013, 11:03 PM
Fuck it almost looked new there lol

atoyot
08-26-2013, 11:10 PM
hahaahah look at these pic... it still has a roofrack...
n JJ has hair...

Happypants
08-26-2013, 11:12 PM
Sooooo what's goin on with this thing? Hurry up with your Reno!!

vajayjay
08-27-2013, 05:11 AM
Soon the build resumes [36]

I need to wheel :(

procircuit
08-27-2013, 08:22 AM
still remember the day we lost the door.... lol

vajayjay
08-27-2013, 09:39 PM
still remember the day we lost the door.... lol



:D The other door fell off shortly after :dontknow:

procircuit
08-27-2013, 10:06 PM
Doors often fall off after they've lost a partner, life's just not the same anymore

atoyot
09-23-2013, 07:34 PM
jj hopefully u can get goin on it again soon...[cheers]
.
. u really looked like u were missin drivin ur rig on sunday....
.
.
.

vajayjay
09-23-2013, 08:26 PM
That picture really catches the disappointment :(

C-Dog
09-24-2013, 12:06 AM
Definitely doesn't have the classic JJ :D that's for sure lol

skyjacker
09-24-2013, 08:44 AM
Is it done yet JJ????????!!!:D

procircuit
09-24-2013, 08:54 AM
Done yet... How bout now








Or now.

















Must be by now

Always broke
09-24-2013, 06:39 PM
done yet?

epic3
09-24-2013, 07:21 PM
its close right?