PDA

View Full Version : 4runner tranny problem


toyon35s
07-11-2012, 03:32 PM
what would cause my tranny to stop working and loose all gears when hot,then i shut the truck off for a few minutes then i get the tranny back for about ten minutes or so then loose it again,also when it starts disengaging it has a shake feeling to it,im lost ,changed the fluid and still same problem,anyone have a clue [cheers]

toyon35s
07-11-2012, 03:32 PM
its an auto and its a 1995 with the 3.0 [cheers]

bcmaxx
07-11-2012, 05:05 PM
Whenn its in its slipping condition, unplug the harness and see if it will move while unplugged (if it does you will have to manually shift it), possible low pressure. and kinked or plugged cooler lines?

Griswold
07-11-2012, 06:36 PM
Paging Robo .....

toyon35s
07-11-2012, 11:11 PM
After checking a few things , it seems if I unhook the battery and clear codes it works for a few minutes then stops working again, think it may have something to do with a sensor , gettin the codes read tomorrow and I'll see what happens [cheers]

yoda604
07-12-2012, 11:49 AM
Have you checked the lines that run into your radiator to make sure they're not plugged. Always happens, that's why after market bolt on coolers are way better.

toyon35s
07-12-2012, 10:55 PM
looks to be the speed sensor,gettin a new one tomorrow and hopefully it will be back up and going [cheers]