PDA

View Full Version : 81 Malibu rebuild.


Pages : 1 [2]

procircuit
03-25-2013, 07:45 AM
So that what you were doinv while we was all wheelin.....

:roll eyes i was on call this last weekend, made the best of having to stay local
[cheers]

HEAVY METAL
03-25-2013, 10:14 AM
thats gonna be a killer car! nice fab work.

4skin
03-25-2013, 07:40 PM
What you could do is swing out door bars pull the pins and remove the bars for cruising and put them back in for track
Did this in buddy's ten second rambler
because he's older than dirt and couldn't get in and out
Anymore

procircuit
03-26-2013, 06:04 PM
What you could do is swing out door bars pull the pins and remove the bars for cruising and put them back in for track
Did this in buddy's ten second rambler
because he's older than dirt and couldn't get in and out
Anymore

Good idea, definitely crossed my mind at one point but the more I thought about it and realized ill likely have the car out seldom and i probably won't track it at all.... So scrapped the cage idea as a whole

:dontknow:

B
03-26-2013, 08:43 PM
id still do a nice cleam 4 ponit in the back half to keep it stiff and planting the rubber to the ground then down the road if u wanna add to it a 6 or 8 point is no big deal ... the car is gutted it would be ez to add to the mix ...


just food for thought my f body sure handled a lot better after some tubes were added to it ... athou it didnt get all the goodies your has

4skin
03-26-2013, 09:57 PM
With b on this even a 4 point will stiffen the chassis up huge
And didn't you notch the frame yes you did
Went back and looked another reason to do at least a 4 point in the back

atoyot
03-26-2013, 10:07 PM
gues time to almost talk glass on this thing eh.....



u commin cruzin this summer?.
.
.
.

procircuit
03-27-2013, 07:15 AM
id still do a nice cleam 4 ponit in the back half to keep it stiff and planting the rubber to the ground then down the road if u wanna add to it a 6 or 8 point is no big deal ... the car is gutted it would be ez to add to the mix ...


just food for thought my f body sure handled a lot better after some tubes were added to it ... athou it didnt get all the goodies your has

With b on this even a 4 point will stiffen the chassis up huge
And didn't you notch the frame yes you did
Went back and looked another reason to do at least a 4 point in the back


i Agree with you guys completely, and i have a whole 6 point comp engineering cage sitting on the wall with formed struts to go over the rear seat.

Problem being.

Car body is on original frame. i wanted to keep on that frame to get painted. in order to do the cage i have to go right to the frame... to be legit...... but new minty frame is already painted and with all suspension components on it sitting on other side of shop...

so my OCD/ADD head has a panic attack when it trys to think about an order of operations so i could get cage installed onto minty frame, yet still have body on old frame for paint..:dontknow::dontknow::dontknow:

procircuit
03-27-2013, 07:19 AM
even if i finish body mods, undercoat body, then put on new frame, i still have to cut out squares to mount cage to frame ( to give me enough room to weld around) and then weld them in form fit around the tube after, but then it would kill the undercoating job and id have to try and re-do that while not making a mess or fucking up my minty chassis/parts.

procircuit
03-27-2013, 07:21 AM
Hmm i guess i could finish the body work, under coat body, mate to new chassis, take off all the suspension parts and out with the diff, do all the cage work, mask off the whole frame and re undercoat.....

fuck i have a headache from thinking and its only 7:20 am..... BALLZ


Hmm or maybe i could put old body onto new frame with all suspension components and shiny parts off, cut the squares in body, figure out the layout of the cage, weld sleeves around where all the tie in points are...fix body squares leaving holes for tube to go thru..... put body back on old roller for paint, and when it came time to put body back on minty frame i'd just have to weld the cage to the sleeves..

Hmm

C-Dog
03-27-2013, 08:05 AM
Shut now I have a headache from all the reading lol and it's only 8:04






Looking fkn awesome either way man can't wait to see the final product

yoda604
03-27-2013, 08:36 AM
Hmm i guess i could finish the body work, under coat body, mate to new chassis, take off all the suspension parts and out with the diff, do all the cage work, mask off the whole frame and re undercoat.....

fuck i have a headache from thinking and its only 7:20 am..... BALLZ


Hmm or maybe i could put old body onto new frame with all suspension components and shiny parts off, cut the squares in body, figure out the layout of the cage, weld sleeves around where all the tie in points are...fix body squares leaving holes for tube to go thru..... put body back on old roller for paint, and when it came time to put body back on minty frame i'd just have to weld the cage to the sleeves..

Hmm

I know you're all about welding, but what about making just mounting bolt holes, that way you don't have to grind down the painted frame or swap anything over and it will still tighten everything up. in fact for the most part it will give you more rigidity than you will ever need, for what you're using it for.

4skin
03-27-2013, 08:46 AM
On my chevelle it has 2 in holes hole sawed through body
I tacked the front section together
was able to get a couple tacks then lifted body up off frame
Enough to weld it to the frame touched up paint on frame
The comp engineering cage isn't made to go to the frame
At leastThe three Malibu ones I have done wernot
Had to weld stubs to bottom of tubes to raise cage up
So you could weld the stubs to frame like you are thinking
I have done the hack squares to weld to the frame
but they were complete running cars and to much work to lift body

procircuit
03-27-2013, 08:54 AM
On my chevelle it has 2 in holes hole sawed through body
I tacked the front section together
was able to get a couple tacks then lifted body up off frame
Enough to weld it to the frame touched up paint on frame
The comp engineering cage isn't made to go to the frame
At leastThe three Malibu ones I have done wernot
Had to weld stubs to bottom of tubes to raise cage up
So you could weld the stubs to frame like you are thinking
I have done the hack squares to weld to the frame
but they were complete running cars and to much work to lift body



Gotcha.... The cage I have does come with floor plates instead but I don't feel right about just welding it to the floor pan and not right thru..

Ill get a plan together and bang something out this long weekend.

procircuit
04-02-2013, 07:32 AM
well i did a FUkton of work on this thing over the long weekend, between easter feasts and mowing my mega lawns... pics to come as soon as i get a bit more done tonight..

but on a good note, after 11 months my handbrake showed up!
http://img.photobucket.com/albums/v316/papananamous/C04AE343-14FD-471D-A088-4A83D96FF9FB-3862-000004D5D2565146.jpg

procircuit
04-02-2013, 08:57 AM
Well mine as well post some pics now, ill take more when i do more tonight..

mounted handbrake, finished a few supports from trunk hinges to tubs.. and finish welded everything else left.. spent half a day cleaning up every spot where work was done to look purdy..

Decided to cut out fender lip for some more clearance.. cut and tacked it back together as i went.... can stuff a 14'' wide tire tucked now... weeee

seam sealed the whole underbody.. which was messy as hell, i dropped a huge blob in my beard and spent a half an hour with acetone getting it out ( didnt pass out tho!) win...

next day i cleaned up the rest of the underbody and scuffed up...then masked off for some underbody rubber rock guard..

http://img.photobucket.com/albums/v316/papananamous/086641E0-940B-4E00-A169-2C848B4F8A87-3862-000004D5EA751A9D.jpg
http://img.photobucket.com/albums/v316/papananamous/7C0FF9DA-FD14-4C4A-BF27-367939E2F8DB-3862-000004D5F0354150.jpg

trimmed and lots of rooooom.
http://img.photobucket.com/albums/v316/papananamous/62C3DB0B-085E-4CEA-B9F3-D803393457EC-3862-000004D5FA32839B.jpg
http://img.photobucket.com/albums/v316/papananamous/5BD750B2-B12E-4794-93B0-714A51A63DFE-3862-000004D607B65AE4.jpg
http://img.photobucket.com/albums/v316/papananamous/9BEFEFD8-051F-46F1-B638-E8D05DBD305F-4822-0000066ACEAD749A.jpg
http://img.photobucket.com/albums/v316/papananamous/9708D3FC-5189-4B32-B89C-A427F8A91592-4822-0000066AD4763589.jpg

mm messy seam sealer
http://img.photobucket.com/albums/v316/papananamous/5A214985-8ABF-495C-8B96-335612CE55BA-4822-0000066ADCCC5BBD.jpg
http://img.photobucket.com/albums/v316/papananamous/DA55C2EB-C1FD-411D-A412-4660D13AC3CC-4822-0000066AE3B9615C.jpg
http://img.photobucket.com/albums/v316/papananamous/2927F236-6A38-4F77-B01F-3951DD802E65-4822-0000066AE8F888A7.jpg

all prepped and cleaned, my make shift poly spray booth
http://img.photobucket.com/albums/v316/papananamous/31D4B29C-6569-41EA-BA24-C5FCC3E7B999-6518-000007D376FC7F56.jpg
http://img.photobucket.com/albums/v316/papananamous/34294986-A373-40F7-B4EA-3C57D9CC6DDC-6518-000007D37C80DA0A.jpg

all minty fresh now.
http://img.photobucket.com/albums/v316/papananamous/5BD2080E-4246-4B23-8C1F-578B993F8D6B-6518-000007D382768A5C.jpg
http://img.photobucket.com/albums/v316/papananamous/DC95DAB6-E351-43A6-AFD8-C566C0932DFF-6518-000007D3878C81DA.jpg
http://img.photobucket.com/albums/v316/papananamous/C85FFC15-383D-4B5A-8414-A9525EA8586D-6518-000007D38CD0D20B.jpg
http://img.photobucket.com/albums/v316/papananamous/4FC8001F-96C8-45D3-99A8-07177C90F5C6-6518-000007D391BB7E05.jpg
http://img.photobucket.com/albums/v316/papananamous/51EF9F1D-93A3-4BC3-9BCE-C59F7A5C14E2-6518-000007D396A01638.jpg

spent so much time prepping everything and cleaning up metal, pics barely do it justice lol.

jordanbennett
04-02-2013, 09:20 AM
[36] [36]

procircuit
04-02-2013, 01:56 PM
mating the body and the chassis tonight if all goes well... then cagey cagey

procircuit
04-02-2013, 06:56 PM
It was mating season at my place tonight[49]:cool:



















http://img.photobucket.com/albums/v316/papananamous/03EDBF9B-305B-4D40-A857-0CA3019B32C9-7734-000009069D275D06.jpg
http://img.photobucket.com/albums/v316/papananamous/CCCC5778-9E2D-4C9D-AC6D-D840007DB2CB-7734-00000906CE6B5AEF.jpg
http://img.photobucket.com/albums/v316/papananamous/716382A9-FAF2-4DD5-B789-5F4494B95130-7734-00000906C41DC0E0.jpg
http://img.photobucket.com/albums/v316/papananamous/272D77E5-7B1D-46E2-AD92-036754C88637-7734-00000906AE6C5A00.jpg


Now I have all this room...... For activities[cheers]
http://img.photobucket.com/albums/v316/papananamous/D2621B96-A738-4A6B-BF99-737438AFC1C7-7734-00000906D8BDD7BB.jpg

HEAVY METAL
04-02-2013, 07:13 PM
sic, always liked this body style.

85chevy
04-02-2013, 07:56 PM
[cheers] They finally meet looks awesome

procircuit
04-03-2013, 07:25 AM
ya its gettin there... need to get my ass in gear if i want this running for at least some of the summer

Tunabomber
04-03-2013, 07:57 AM
soooooo coool [36][cheers]

procircuit
04-04-2013, 07:25 AM
http://img.photobucket.com/albums/v316/papananamous/mojave.jpg

picked up one of these dealeys and a plenum yesterday.... should fit nice and tight in behind the dash all stealth like.

78bronco
04-07-2013, 09:17 AM
looking good!!!

atoyot
04-07-2013, 11:00 AM
hot rod.....

procircuit
04-08-2013, 08:37 PM
Had some time

http://img.photobucket.com/albums/v316/papananamous/6EA9BC60-F7CF-44F3-AC6D-A443C497F024-13826-00001055625D7348.jpg
http://img.photobucket.com/albums/v316/papananamous/472E3E01-0E68-49A3-A053-FC4C51DBE1D9-13826-000010556FA3D8A8.jpg
http://img.photobucket.com/albums/v316/papananamous/1AC4F658-1739-4628-A3A0-692950020788-14293-000010CD4C781887.jpg
http://img.photobucket.com/albums/v316/papananamous/6DE6BED4-2015-41B4-A9B4-43C7A2448811-14293-000010CD6926747F.jpg
http://img.photobucket.com/albums/v316/papananamous/31594231-D59F-4C4C-AC50-EA33E42ADEAD-14293-000010CD6E9B7B92.jpg
http://img.photobucket.com/albums/v316/papananamous/6B9B72B4-B705-4C41-AF6D-746EA8E2F5F7-14293-000010CD9227FF30.jpg

Stealth lol
http://img.photobucket.com/albums/v316/papananamous/DC23BD92-15C6-4CF8-BA84-DCCE5AE80221-14293-000010CD975154AA.jpg
http://img.photobucket.com/albums/v316/papananamous/2E6791B4-EC3A-4C7F-8CD6-F26B0C03B8BD-14293-000010CDA5FFBE1A.jpg
http://img.photobucket.com/albums/v316/papananamous/C40D3D02-FB39-48FF-9317-C30CDD342BC7-14293-000010CD75DB8CA2.jpg

Few more bars to add. At least it's another check on the list.

Tunabomber
04-08-2013, 10:14 PM
Cool thread man

C-Dog
04-09-2013, 07:53 PM
Bad ass totally dig the stealthy ness of the cage [36]

procircuit
04-22-2013, 07:48 PM
A little update.. Headed out for paint ASAP.


Sooo I sealed and primed all the inside area, Rubber lined floor pan and trunk area... Oh and cage painted..
http://img.photobucket.com/albums/v316/papananamous/8B3761D9-74AF-4319-96B1-C24345CD8A1A-125-00000001C10C44A8.jpg
http://img.photobucket.com/albums/v316/papananamous/FEDE80CD-CA6C-4845-9E30-25979DC01C47-125-00000001C6DB9DD9.jpg
http://img.photobucket.com/albums/v316/papananamous/C474A1FD-F81A-449F-90F1-1188FB3EB0C6-125-00000001CC621F0A.jpg
http://img.photobucket.com/albums/v316/papananamous/0612813C-F2B4-496F-89C5-1867F3E79ED1-125-00000001D1B930DC.jpg
http://img.photobucket.com/albums/v316/papananamous/5DCD38F9-0225-40BC-B901-807E7CCA13A7-125-00000001D84029B7.jpg
http://img.photobucket.com/albums/v316/papananamous/C899FE30-F127-44B2-9348-C1D25BAD94EC-125-00000001DD9F95F0.jpg
http://img.photobucket.com/albums/v316/papananamous/23516000-3230-4A2E-8F0D-07BF60609A22-125-00000001E3A64B4D.jpg
http://img.photobucket.com/albums/v316/papananamous/A5E17D8A-4518-4910-96C2-49899DAFFE1F-4024-0000041E31FF5E59.jpg
http://img.photobucket.com/albums/v316/papananamous/0978BC4B-E628-456E-B784-6DA42145547E-4024-0000041E3772788E.jpg
http://img.photobucket.com/albums/v316/papananamous/416F9B35-C2F2-4097-8FF2-F570EA3AF2ED-4024-0000041E3BCF7F2B.jpg
http://img.photobucket.com/albums/v316/papananamous/57BCD650-695F-4B3D-80E6-342087E62902-4024-0000041E40570FCF.jpg
http://img.photobucket.com/albums/v316/papananamous/C45EF071-CEF7-45AF-A3A2-E7FB77D6AD40-4024-0000041E4BF7D425.jpg


Now for painty painty

atoyot
04-22-2013, 08:08 PM
doin a clean job on it....

so commin cruzin this year......
.

.

procircuit
04-22-2013, 08:12 PM
doin a clean job on it....

so commin cruzin this year......
.

.



Ahhhhh geeeeeaaaahhhhh:cool:

procircuit
04-23-2013, 11:37 AM
Mmmmm painty painty

Tunabomber
04-23-2013, 12:41 PM
so what kinda coating did ya use for the floor

procircuit
04-23-2013, 12:48 PM
so what kinda coating did ya use for the floor
after blasting, priming, smoothing and sealing i scuffed and used a pro-form undercoating, works mint

Tunabomber
04-23-2013, 01:49 PM
i used a arosol bed liner..worked great but a little sticky if something sits on it for a while


i like the matt look of yours . you leaving like that or ?

procircuit
04-23-2013, 01:57 PM
i used a arosol bed liner..worked great but a little sticky if something sits on it for a while


i like the matt look of yours . you leaving like that or ?


leaving it matte because it all ends up under a carpet except for the trunk... which will be a fuel cell a battery and im sure a speaker box..

if its sticky it might be the unpaintable stuff, which doesn't really set up.

C-Dog
04-23-2013, 10:52 PM
http://img.photobucket.com/albums/v316/papananamous/mojave.jpg

picked up one of these dealeys and a plenum yesterday.... should fit nice and tight in behind the dash all stealth like.



Info on this heater ??


Where's ya get It what brand is it ?? I'm gonna need heat in the 36

procircuit
04-24-2013, 07:02 AM
Info on this heater ??


Where's ya get It what brand is it ?? I'm gonna need heat in the 36


flexalite lo-pro mojave.

C-Dog
04-24-2013, 07:18 AM
flexalite lo-pro mojave.





[36]

big billy llh
04-25-2013, 09:57 AM
looks good nice work

procircuit
04-26-2013, 07:21 AM
forgot to snap pics, but all loaded up and gone for paint.... shop is so empty its creepy.

yoda604
04-26-2013, 08:52 AM
forgot to snap pics, but all loaded up and gone for paint.... shop is so empty its creepy.

Tinker on the go kart?

procircuit
05-12-2013, 08:24 PM
A few pics of my dash gettin assembled before shipped.. Can't wait for assembly day:party0010:
http://img.photobucket.com/albums/v316/papananamous/BE24882B-2DFA-42F4-8F0A-24775CA184CD-4266-000005DD5F556857.jpg
http://img.photobucket.com/albums/v316/papananamous/6B5B9C60-5705-4265-A864-3644EFD34A5D-4266-000005DD74CE43A4.jpg

85chevy
05-12-2013, 08:31 PM
Damn I like it looks sweet

Happypants
05-12-2013, 08:54 PM
Not too shabby..

4skin
05-12-2013, 09:25 PM
Not bad for a soulless ginger

atoyot
05-12-2013, 09:35 PM
...everytime i see black with a red stripe i cant help but think
..A-Team Van.......:D ....
..
.
needs a lil more cowbell[36]
.
.
.

procircuit
05-13-2013, 06:40 AM
...everytime i see black with a red stripe i cant help but think
..A-Team Van.......:D ....
..
.
needs a lil more cowbell[36]
.
.
.

the red stripe ties in around the car... Baer on the brakes is written in red.. valve covers have chevrolet in red... there was one other spot but i forget :D

Tunabomber
05-13-2013, 07:15 AM
i hate that your CAR has more diff armor than my truck go fuck yourself

sorry :o

procircuit
05-13-2013, 07:25 AM
i hate that your CAR has more diff armor than my truck go fuck yourself

sorry :o

;)

procircuit
05-13-2013, 10:06 AM
Not bad for a soulless ginger
[d]

procircuit
05-22-2013, 07:27 AM
Before sending out my order, Rob at dixie re-painted and pin striped my gauge cluster.... and it looks MINT!!.....
More satiny and with the aluminum pinstripe instead of red it'll really tie in good with the whole theme of the car..
http://img.photobucket.com/albums/v316/papananamous/2E0F5601-D192-4BBD-AC84-15F2647C5BE6-11775-000010C4D8D29CD4.jpg (http://smg.photobucket.com/user/papananamous/media/2E0F5601-D192-4BBD-AC84-15F2647C5BE6-11775-000010C4D8D29CD4.jpg.html)

the guys at dixiemontecarlo really go above and beyond.. hats off

atoyot
05-27-2013, 09:37 AM
now that looks killer.....[36]
way more classy than the red A-team stripes:)
.. that will look great in the car
looks clean:cool:
.
..

.

Tinker
05-27-2013, 09:57 AM
Looks waaaaaaaay better ;)

procircuit
05-27-2013, 11:28 AM
ya im liking it... the gloss face with the red stripe was making puke in my own mouth a bit....

i get the car back end of this week or weekend :D:D:D:D:D:D:D

should be able to start posting some made updates of piles upon piles of shiny parts going in...[36][36][36][36][36][36][36]

Tunabomber
05-27-2013, 12:04 PM
Can't wait to see it

procircuit
05-27-2013, 12:09 PM
Can't wait to see it

me to, feels like i sent my kid out for summer camp and im waiting for them to come back

procircuit
05-30-2013, 07:16 PM
Expecting a call to come pick up my car any day now... Picked up some tires and had mounted up.. Conservative 285/45/17 rear and 250/50/17 front. Ill use the 285 as a feeler to see how much I can get away with for the 2nd set of rears, should make quick work of the first set :D

http://img.photobucket.com/albums/v316/papananamous/2D2BB994-5D6B-4B60-B3AF-903BFA92618C-4812-0000071DD9285602.jpg

78bronco
05-30-2013, 10:26 PM
cluster looks good!!!

procircuit
06-03-2013, 12:49 PM
smooooth
http://img.photobucket.com/albums/v316/papananamous/027B5E40-B5A5-464C-9635-82CD26292702-7520-00000B2734FE0BD9.jpg (http://smg.photobucket.com/user/papananamous/media/027B5E40-B5A5-464C-9635-82CD26292702-7520-00000B2734FE0BD9.jpg.html)

Tunabomber
06-03-2013, 02:09 PM
boner [36]

4skin
06-03-2013, 06:04 PM
So you got the firewall painted ???

procircuit
06-03-2013, 06:35 PM
So you got the firewall painted ???

lol, he did the jambs,firewall,outer edges and insides of fenders... Then assemble fit and final spray the rest in one clean shot.

TWOZEROFOUR
06-03-2013, 07:13 PM
Hells Yea, Nice work man [36]

procircuit
06-11-2013, 12:30 PM
few shots before the final mask an spray
http://img.photobucket.com/albums/v316/papananamous/82076CA7-2E1F-4564-9AFC-AB94E77BFE46-14444-00001498242F2D70.jpg (http://smg.photobucket.com/user/papananamous/media/82076CA7-2E1F-4564-9AFC-AB94E77BFE46-14444-00001498242F2D70.jpg.html)
http://img.photobucket.com/albums/v316/papananamous/320440F3-9E22-455D-B1A0-B0A5D8AE5713-14444-00001498296B623D.jpg (http://smg.photobucket.com/user/papananamous/media/320440F3-9E22-455D-B1A0-B0A5D8AE5713-14444-00001498296B623D.jpg.html)
http://img.photobucket.com/albums/v316/papananamous/51C4FB89-D5C8-4741-8334-526643135FD6-14444-000014982E413D44.jpg (http://smg.photobucket.com/user/papananamous/media/51C4FB89-D5C8-4741-8334-526643135FD6-14444-000014982E413D44.jpg.html)
http://img.photobucket.com/albums/v316/papananamous/D5E7049E-D47A-4B63-8619-23D5FFB2C6E4-14444-0000149832942DBF.jpg (http://smg.photobucket.com/user/papananamous/media/D5E7049E-D47A-4B63-8619-23D5FFB2C6E4-14444-0000149832942DBF.jpg.html)
http://img.photobucket.com/albums/v316/papananamous/E5DA68B0-8A63-406E-81CF-5A423F014246-14444-0000149818630471.jpg (http://smg.photobucket.com/user/papananamous/media/E5DA68B0-8A63-406E-81CF-5A423F014246-14444-0000149818630471.jpg.html)

Chody
06-11-2013, 01:30 PM
bet your getting excited :) gonna look so good

atoyot
06-11-2013, 02:10 PM
cool
looks like youll be able to come cruzin this year!!!!

procircuit
06-11-2013, 04:24 PM
bet your getting excited :) gonna look so good

Words do not describe.. Assembly time is going to be TITS

cool
looks like youll be able to come cruzin this year!!!!

Fuck ya[36]

78bronco
06-11-2013, 07:20 PM
looking good that car would look stunning in white

procircuit
06-13-2013, 07:01 PM
Today was gooder.. UPS Came with 8 giant boxes with my full black Interior,dash and Rad.. As well as tons of other little odds and ends to finish the build..
http://img.photobucket.com/albums/v316/papananamous/8FEF6538-E728-45EE-8422-59DB197673E7-16772-0000172001B9DCB0.jpg

Oh and cars painted... This weekend the build is back in full swing.
http://img.photobucket.com/albums/v316/papananamous/77F10E8E-6872-4361-92A6-34CE73099E14-16772-0000171FEBE0702F.jpg
http://img.photobucket.com/albums/v316/papananamous/7B193B1E-26D5-4D48-BD2D-5E953E45AC9D-16772-0000171FF062DA69.jpg
http://img.photobucket.com/albums/v316/papananamous/4B6A8C24-894C-4C11-8959-6E69E476E70B-16772-0000171FF4DE0C9F.jpg
http://img.photobucket.com/albums/v316/papananamous/18EB9538-39EE-4A03-AF06-7F3F6419E81C-16772-0000171FD841C436.jpg
http://img.photobucket.com/albums/v316/papananamous/B0FB584A-A9E6-459F-93B2-680F1AB28FF4-16772-0000171FCEDC5CF0.jpg

Tomorrow I'm feeling a little sick for work.. Cough cough

Happypants
06-13-2013, 07:15 PM
Hahahah, sick day for sure, nice, can't wait to see it back in swing

atoyot
06-14-2013, 12:57 AM
def a nice straight car to have in black.....
.
.
.look forward to layin some rubber on the pavement with ya.....

Chody
06-14-2013, 06:56 AM
i need to see this beast in action.

85chevy
06-14-2013, 04:29 PM
damn that looks great gonna be a nice to see it finished

lincoln locked
06-15-2013, 08:40 AM
looks awesome very nice work[cheers]

procircuit
06-16-2013, 07:38 AM
Home sweet home, tryed wheels on.. Need to drop rear about 2" and get the motor and rest of the weight on..
http://img.photobucket.com/albums/v316/papananamous/8C95567D-88B7-4511-A5DC-E67FE349AABF-267-0000002C0D29E098.jpg

procircuit
06-16-2013, 06:46 PM
Snuck out in the shop for the day.. fit and drilled my new front inner fenders, painted motor side and rubber undercoated the wheel side... then finished up my front brake lines, suspension and chassis braces.. Put in some new energy suspension motor mounts and installed motor and new griffin rad.

http://img.photobucket.com/albums/v316/papananamous/CEF11F9C-A532-431A-922D-B1D8AC825279-962-000001A22B02D55D.jpg

http://img.photobucket.com/albums/v316/papananamous/B95642C9-34ED-412E-BF43-FDB85A17A327-962-000001A22FB1BBED.jpg

http://img.photobucket.com/albums/v316/papananamous/FEAFFE40-ED04-4CE0-872A-013FE31DB2D9-962-000001A233FCD069.jpg

SHITTY
06-16-2013, 06:50 PM
dam that looks awesome so far.

procircuit
06-16-2013, 07:03 PM
dam that looks awesome so far.

Thanks eh [cheers]

hoser
06-16-2013, 07:38 PM
Looks pimp. :cool: :cool:

procircuit
06-16-2013, 09:02 PM
Looks pimp. :cool: :cool:

[cheers]

vajayjay
06-16-2013, 10:24 PM
That's it?

I figured there'd be donut pics by now :D

4skin
06-16-2013, 11:42 PM
Your painter sucks he put paint on backwards
The shiny side is suppose to go out not in

78bronco
06-17-2013, 12:10 AM
looks sick

procircuit
06-17-2013, 06:39 AM
Your painter sucks he put paint on backwards
The shiny side is suppose to go out not in
[15][15]

Chody
06-17-2013, 07:37 AM
i likey. what kinda wheels are those?

procircuit
06-17-2013, 07:51 AM
i likey. what kinda wheels are those?

Billet Budnik Gassers

Chody
06-17-2013, 08:32 AM
they look great on that car

atoyot
06-17-2013, 10:00 AM
looks like thats enough cowbell!!!!
.
..
.

..
.
commin along nicely........


..
.

..
.
.
.
.

Chody
06-17-2013, 11:03 AM
needs more turbo

procircuit
06-17-2013, 12:08 PM
needs more turbo

maybe next year [36]

toyotaAlex
06-17-2013, 07:12 PM
Just went through the thread, cars looking sick man!

procircuit
06-17-2013, 07:55 PM
Just went through the thread, cars looking sick man!

Thanks eh [cheers]

procircuit
07-01-2013, 07:46 AM
Rolled her outside while I was shortening bumpers in shop. few more pics tonight.

http://img.photobucket.com/albums/v316/papananamous/778B8262-7F5B-4789-83AC-01CA39381C68-14411-000013EE8831DD21.jpg

nbrowser
07-01-2013, 08:36 AM
Looks real nice, PERFECT stance in my opinion !

Tunabomber
07-01-2013, 05:33 PM
Love deep dish rear

procircuit
07-01-2013, 09:20 PM
Finished a bit more this weekend. Started out by shortening the obscenely long factory bumpers a few inches, tucked them in tight..
- installed trans last week.RMVB 700r4, upgraded internals and added a 2200 stall converter..( thanks geard customs! )
- went thru and tightened all suspension
- finished up 95% of the brake lines, installed master,booster and pedal assembly. just handbrake to go.
- starter/distributor/fans with shroud/trans cooler/stage 8 header hardware.
- fuel cell,prelim filter and pump mounted.. Going to get fittings to plumb it all tomorrow.
-installed heater setup, started to layout painless kit..
-locks mirrors and other misc as well.

More to come this week.

Before

http://img.photobucket.com/albums/v316/papananamous/52FC604A-0C6B-4396-9787-84AFDE8507E9-14411-000013EE5D0065DA.jpg
http://img.photobucket.com/albums/v316/papananamous/B89325B9-2AAB-4FD2-9492-4659C5708627-14411-000013EE6990317F.jpg
http://img.photobucket.com/albums/v316/papananamous/E630415B-57DC-4CD8-8E22-C7548E19FD4A-14411-000013EE70B991DF.jpg
http://img.photobucket.com/albums/v316/papananamous/5758E5BA-F892-4E72-A42F-5BAE0C7B38C7-14411-000013EE75852497.jpg
http://img.photobucket.com/albums/v316/papananamous/BA408DA3-452F-4FB3-8FF0-0DB39ED4DC11-14411-000013EE7A1663F2.jpg
http://img.photobucket.com/albums/v316/papananamous/0AA0302F-FE2E-48B3-BDDD-4DAE723214C7-14411-000013EE7E9A7DD2.jpg

After
http://img.photobucket.com/albums/v316/papananamous/C2A01C0E-BC0A-48FF-A886-47480E07A5E5-14411-000013EEA0CE7690.jpg
http://img.photobucket.com/albums/v316/papananamous/F95888B2-F0D9-4E66-B7B6-B1D6D6AFE56C-14411-000013EEA71A2E0A.jpg
http://img.photobucket.com/albums/v316/papananamous/869D2808-B277-4EC4-896D-F61511F0739A-14411-000013EEAB9CFF87.jpg
http://img.photobucket.com/albums/v316/papananamous/3936A46E-56CC-49EF-964C-BE1538C0876E-14751-0000158AF69D273B.jpg

Added some chassis supports..
http://img.photobucket.com/albums/v316/papananamous/C3E3C100-44D9-466D-8E5E-8D1F9CFF7A55-14751-0000158AE7CDFECA.jpg
http://img.photobucket.com/albums/v316/papananamous/6EA158E5-2B85-4163-A6A1-A4F44A15D0B3-14751-0000158AECB83573.jpg
http://img.photobucket.com/albums/v316/papananamous/E5CB2263-2202-43AC-BF77-F6411C82C266-14751-0000158B20C0960F.jpg
http://img.photobucket.com/albums/v316/papananamous/22E1D3B5-72BC-4563-9798-DC07962F3F03-14751-0000158B1C7941B4.jpg
http://img.photobucket.com/albums/v316/papananamous/C9E58ED4-AF22-4E0C-BD2D-7BFE8227FA1C-14751-0000158AFD5C486B.jpg
http://img.photobucket.com/albums/v316/papananamous/042E82F4-EEFB-46A1-9358-D70A9EA5441B-14751-0000158B01B1D9CE.jpg
http://img.photobucket.com/albums/v316/papananamous/63DC2888-30C0-4460-B9E2-7584BE5CC620-14751-0000158B107BC02F.jpg
http://img.photobucket.com/albums/v316/papananamous/57BA03F4-662F-411A-8B0C-7044AB9FDBF3-14751-0000158B2C192E66.jpg
http://img.photobucket.com/albums/v316/papananamous/EEA00E00-AF0B-4704-9AC5-08E5A98DB43A-14751-0000158B25D0F9B4.jpg
http://img.photobucket.com/albums/v316/papananamous/987542A7-76C5-4A73-B634-9BFF800AA48C-14751-0000158B30196827.jpg

Now some wiring fun.

B
07-01-2013, 10:04 PM
sick brosef just sick ... [cheers] ...

and u cant beat the black paint looks soo mean now ... [5]

Hello Kitty
07-02-2013, 02:25 AM
Fuck man this car looks so pimp.! All I can say is fill it with Asian chicks in lil slutty school outfits

procircuit
07-02-2013, 08:52 AM
jerry rigged some old ac units and cardboard to work out in shop all weekend.. was frosty in there

http://img.photobucket.com/albums/v316/papananamous/0091C70F-AD0C-4DCF-AA5C-B8DD313C9899-14751-0000158ACFE81276.jpg (http://smg.photobucket.com/user/papananamous/media/0091C70F-AD0C-4DCF-AA5C-B8DD313C9899-14751-0000158ACFE81276.jpg.html)

Chody
07-02-2013, 11:11 AM
holy fuck , whens it forsale? dibs? Huge difference from the pinky red. that thing looks perfect

Tunabomber
07-02-2013, 11:53 AM
30 degrees in mah bedroom lastnight... Asshole

Tunabomber
07-02-2013, 11:59 AM
U joint 0
Hot shop 1

http://i158.photobucket.com/albums/t83/mrtuna/20130701_124244_zps015f99fb.jpg

Tinker
07-02-2013, 12:03 PM
Sick buddy! Nice job!

procircuit
07-02-2013, 12:54 PM
30 degrees in mah bedroom lastnight... Asshole

i had these two old ones for the shop, was so cold i could damn near leave the beer on the counter and it would stay chilled :cool: was almost as cold as my bedroom.. not quite..

procircuit
07-02-2013, 12:55 PM
holy fuck , whens it forsale? dibs? Huge difference from the pinky red. that thing looks perfect

haha no sell... this was my first car, has that sentimental value thingy...



well unless someone offers me some ridiculous amount of cash that i would be stupid not to.:cool:

Tunabomber
07-02-2013, 12:56 PM
:eek:








:(











:sad

procircuit
07-02-2013, 01:24 PM
:eek:








:(











:sad


:dontknow:

lol i cant get over that pic.. you look like your dying.[cheers]

4skin
07-02-2013, 11:35 PM
:dontknow:

lol i cant get over that pic.. you look like your dying.[cheers]

More like a Asian kid in a sweat shop
Bahahahhahhaa

78bronco
07-02-2013, 11:55 PM
looks killer

procircuit
07-03-2013, 07:16 AM
hands down the most boring part of this build.... wiring....

vajayjay
07-03-2013, 03:09 PM
Will it be ready for this weekend, what should we call it a jeep or a toyota :confused0006:

It's sexy like a jeep,but it took alot to make it work, like a toyota

procircuit
07-04-2013, 06:39 AM
Will it be ready for this weekend, what should we call it a jeep or a toyota :confused0006:

It's sexy like a jeep,but it took alot to make it work, like a toyota


:cool:

procircuit
07-14-2013, 08:42 PM
Finished running all my wires thruout the body.. Dash wiring finished. dash, gauges and column installed..

http://img.photobucket.com/albums/v316/papananamous/054E1BD4-B649-4D3D-9AC9-00D33651DA3D-3862-000005734823B058.jpg
http://img.photobucket.com/albums/v316/papananamous/DEB8E361-E94C-4B32-ABA0-384800935089-3862-00000573569A9B5C.jpg
http://img.photobucket.com/albums/v316/papananamous/09D0B294-786E-4F45-A6DE-97C3CE26186D-3862-00000573404AC3E9.jpg

Ran all the tail section wiring, finished the rear light harness as well as battery connections, fuel pump and sending unit wires..

http://img.photobucket.com/albums/v316/papananamous/C9E5B32D-A6AE-440C-91DF-DEE476B397AD-4309-000006EED822C069.jpg
http://img.photobucket.com/albums/v316/papananamous/81E1676A-9C44-407A-BF41-16B74B7C87FF-4309-000006EEFD774526.jpg
http://img.photobucket.com/albums/v316/papananamous/B4B773E8-EB9B-4437-BD44-156B171E1766-4309-000006EF26D56C61.jpg
http://img.photobucket.com/albums/v316/papananamous/33218A31-B9A7-43F7-B704-1752847E9AF4-4309-000006EF2AF4DACF.jpg

Some more fuel line plumbing, finished up polishing and painting the tail lights. And tucked all the wires in neatly in the trunk.

http://img.photobucket.com/albums/v316/papananamous/93848CCC-128C-450E-97E0-D72E3764D3EA-4309-000006EF218006B1.jpg
http://img.photobucket.com/albums/v316/papananamous/6B763799-44CF-41E7-BD7D-2849737B0CCA-4309-000006EF33F9A5EA.jpg
http://img.photobucket.com/albums/v316/papananamous/BF8C3793-5CC3-418A-82D6-5E055CCBDAEC-4309-000006EF12E0E206.jpg

Ran all the wires under hood, just a few more connections to make.. Finished the heater hoses and bulkhead fittings, installed steering shaft with column.

http://img.photobucket.com/albums/v316/papananamous/4EAE1B1B-CEF8-4158-9F27-99E89A67B409-4309-000006EF385DE90D.jpg
http://img.photobucket.com/albums/v316/papananamous/B81ED98B-B0A1-49C2-BEDC-75D8DDEED733-4309-000006EF41276493.jpg
http://img.photobucket.com/albums/v316/papananamous/F9BBDAB6-F1C0-4028-ABE3-72C9A4B87E58-4309-000006EF4590487D.jpg
http://img.photobucket.com/albums/v316/papananamous/6E14316B-F62F-4253-9ABC-E0D93973D80E-4309-000006EF4A108B10.jpg
http://img.photobucket.com/albums/v316/papananamous/2838B6AC-0BEF-4EAD-B875-62C839A41D2E-4309-000006EF3C6A23BB.jpg
http://img.photobucket.com/albums/v316/papananamous/35E69366-EB41-40CE-B752-AFF576D6B190-4309-000006EF2F6B2A3E.jpg


That's all for meow

Casselman
07-14-2013, 08:54 PM
Saweet, the car is badass [36]

Tunabomber
07-14-2013, 10:10 PM
Boing................

Burge
07-14-2013, 10:50 PM
proper[cheers] the firewall looks very clean

vajayjay
07-15-2013, 04:44 AM
Now that that's done, fix your picture thingy [16]

procircuit
07-15-2013, 06:44 AM
Now that that's done, fix your picture thingy [16]

i just did so neener neener lol

78bronco
07-16-2013, 12:26 AM
seeing this thread makes me want a car again looks good

procircuit
07-16-2013, 06:47 AM
seeing this thread makes me want a car again looks good

thanks!... everytime i look at this thread i hope i get it done before sept! [cheers]

Tinker
07-16-2013, 08:09 AM
http://www.youtube.com/watch?v=lEILyn3BjZs

ha and you thought you had thought of everything......

HEAVY METAL
07-16-2013, 08:26 AM
killer car !

procircuit
07-16-2013, 11:54 AM
http://www.youtube.com/watch?v=lEILyn3BjZs

ha and you thought you had thought of everything......

lol lol

procircuit
07-16-2013, 11:54 AM
killer car !

Thanks eh

procircuit
07-22-2013, 07:29 AM
This last weekend i finished up all the engine bay wiring... ran all the 1/2 aluminum fuel line and the main power from battery... made my junction point in the 1/4 brake line on the drivers side for the hydraulic hand brake.. tidied up a bunch of other loose ends and spent a good 3/4 of a day cleaning the shop, wire mess everywhere.

i only took a few pics but ill get some more tonight.

http://img.photobucket.com/albums/v316/papananamous/7E7C75F6-CEFD-4BCA-888F-687F44C2AE40-5450-000008C57F06B02E.jpg (http://smg.photobucket.com/user/papananamous/media/7E7C75F6-CEFD-4BCA-888F-687F44C2AE40-5450-000008C57F06B02E.jpg.html)

http://img.photobucket.com/albums/v316/papananamous/832AE0E9-CE1E-41DD-B571-126B2C2B36C3-5450-000008C5871B92E1.jpg (http://smg.photobucket.com/user/papananamous/media/832AE0E9-CE1E-41DD-B571-126B2C2B36C3-5450-000008C5871B92E1.jpg.html)

this is after all the wiring was finished... still looks nice and clean!.. i ran the alternator wires up from the bottom and kept everything else tucked away as best i could.
http://img.photobucket.com/albums/v316/papananamous/2FC0CD98-91B6-466F-9073-375B638B2BFF-5450-000008C58C0EFB52.jpg (http://smg.photobucket.com/user/papananamous/media/2FC0CD98-91B6-466F-9073-375B638B2BFF-5450-000008C58C0EFB52.jpg.html)
http://img.photobucket.com/albums/v316/papananamous/E0594F2E-6A6C-457E-8DB1-57ABF23D4443-5450-000008C59712E303.jpg (http://smg.photobucket.com/user/papananamous/media/E0594F2E-6A6C-457E-8DB1-57ABF23D4443-5450-000008C59712E303.jpg.html)

and the battery in place, made a nice aluminum flat bar backing plate for the mount underneath..

http://img.photobucket.com/albums/v316/papananamous/1F902E7E-C06C-4B93-AF62-4C484936BA42-5450-000008C5A0A00710.jpg (http://smg.photobucket.com/user/papananamous/media/1F902E7E-C06C-4B93-AF62-4C484936BA42-5450-000008C5A0A00710.jpg.html)

Happypants
07-22-2013, 07:43 AM
Lookin good [36]

85chevy
07-22-2013, 05:36 PM
Nicely done looks slick and clean

procircuit
07-28-2013, 08:50 PM
Decided to have bumpers painted to match car.. Inner fenders in..new steering pump 100% wired and ready for Interior next weekend..

http://img.photobucket.com/albums/v316/papananamous/FF3DAA23-239F-48EC-B86C-E5CCA503CB9E-10096-0000110E22C1BB3A.jpg
http://img.photobucket.com/albums/v316/papananamous/E6ECE902-91F5-4109-A7DA-C8A721BFA2FC-10096-0000110E4C1A87E8.jpg
http://img.photobucket.com/albums/v316/papananamous/8CB44AC0-2229-466E-9B05-6B07CF69CF58-10096-0000110E856DC607.jpg
http://img.photobucket.com/albums/v316/papananamous/16720EBA-C308-42AB-BC50-992F9FFF4D14-10096-0000110E9781C3D6.jpg
http://img.photobucket.com/albums/v316/papananamous/8997430E-B976-4FD8-85FB-31ABDCBF3F58-10096-0000110ECD3833C4.jpg
http://img.photobucket.com/albums/v316/papananamous/C58E7030-A331-46FB-8E5D-6AD8E11D6ECE-10096-0000110EC076F66F.jpg
http://img.photobucket.com/albums/v316/papananamous/BAE06FF8-8B39-4C12-8CE8-7D8D287C989A-10096-0000110EC44DB431.jpg
http://img.photobucket.com/albums/v316/papananamous/D04D85BA-0A9B-4F6C-A4AB-94D6BA533B6F-10096-0000110EAFDED6FB.jpg
http://img.photobucket.com/albums/v316/papananamous/82AF9BA4-C7CC-412D-B5C2-0FEDF428CE0A-10096-0000110EABD86222.jpg
http://img.photobucket.com/albums/v316/papananamous/6D2DCBC8-EDA8-4AAA-9B95-82FB0B2AF1C9-10096-0000110EA797F43C.jpg

Cheese eyes
07-28-2013, 08:52 PM
[cheers] looks killer !!! :cool:

Tunabomber
07-28-2013, 09:15 PM
I hate you.

See disclaimer below
























I dont actually hate you but this is the Internet and stupid people and woman always take things the way.. Oh wajt did i just call you stupid? No wait its just........ Fuck Nevermind..



Nice car man

C-Dog
07-28-2013, 10:41 PM
Wow it's nice to see such a clean build with no $$$ spared it pays off in the end

Killer work man

Gonna be the sickest G Body around that's for sure [36] [36] [36] [36]

Tinker
07-29-2013, 06:48 AM
You missed a spot.....i wont say where or what but you did and now you have to find jt....bwaaa hahahahahahahahaha

procircuit
07-29-2013, 07:17 AM
You missed a spot.....i wont say where or what but you did and now you have to find jt....bwaaa hahahahahahahahaha

trunk latch.:cool:

Tinker
07-29-2013, 07:30 AM
Fun ruiner!

procircuit
07-29-2013, 07:42 AM
Fun ruiner!
:party0010:

jordanbennett
07-29-2013, 10:07 AM
[36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36] [36]

atoyot
07-29-2013, 10:12 AM
almost time for burnout pixx???
..
.
.
.
.
.
[36] :rolleyes:

procircuit
07-29-2013, 10:30 AM
http://img.photobucket.com/albums/v316/papananamous/ilnet_Mayburnedout.gif (http://smg.photobucket.com/user/papananamous/media/ilnet_Mayburnedout.gif.html)

procircuit
07-29-2013, 07:29 PM
Made a couple lines after work,[coke] frame hard line is 1/2 aluminum..

http://img.photobucket.com/albums/v316/papananamous/0B547A2F-3E57-4D90-AA3C-5E0C6C4F4BCB-10096-000012579400E645.jpg
http://img.photobucket.com/albums/v316/papananamous/4A28C0E8-32C4-434A-9C41-5D6CD87AA194-10096-00001257A67F60E3.jpg
http://img.photobucket.com/albums/v316/papananamous/F07B2E7A-B919-4CCF-86FF-327E7E0FA0C9-10096-00001257A1A77A36.jpg
http://img.photobucket.com/albums/v316/papananamous/B127561C-E514-4659-838C-2E3CB80546DF-10096-000012579D808ED9.jpg
http://img.photobucket.com/albums/v316/papananamous/3BC63D38-053B-414C-AAF2-AC8D88BB51B5-10096-0000125785DC39DE.jpg
http://img.photobucket.com/albums/v316/papananamous/5F929A52-C06B-4EAC-B83C-88C77A26F7CF-10096-000012577F8A570C.jpg

[cheers]

procircuit
07-30-2013, 06:39 AM
another burnout


http://img.photobucket.com/albums/v316/papananamous/lllll.jpg (http://smg.photobucket.com/user/papananamous/media/lllll.jpg.html)

epic3
07-30-2013, 01:20 PM
I hate you.

See disclaimer below
























I dont actually hate you but this is the Internet and stupid people and woman always take things the way.. Oh wajt did i just call you stupid? No wait its just........ Fuck Nevermind..



Nice car man
I think you just called him a woman

procircuit
07-31-2013, 11:56 AM
I think you just called him a woman

:WTF :WTF

procircuit
08-05-2013, 08:11 PM
Grill and bezels painted, everything complete up front.. Rear seat reworked and notched to fit around cage and tubs.. Carpet in place to settle and the rear half of the car finished as well.. Headliner install tomorrow, then I need to get some windows in to finish interior..

http://img.photobucket.com/albums/v316/papananamous/629A867A-C6FB-4BD8-B8F2-6A8FCDCC8488-14543-00001BDC5C872E72.jpg
http://img.photobucket.com/albums/v316/papananamous/CB94DC6D-1152-4AA1-85AD-A443F2F2E90C-14543-00001BDC63DE83AA.jpg
http://img.photobucket.com/albums/v316/papananamous/35FF1DED-DE12-48B7-82C1-DA2A2137F25D-14543-00001BDC6A41A567.jpg
http://img.photobucket.com/albums/v316/papananamous/2699AB52-60AF-49CA-B330-AFB0C30346E9-14543-00001BDCAE074BAC.jpg
http://img.photobucket.com/albums/v316/papananamous/20374162-F0F8-4593-B1B3-F5B44A47E33B-14543-00001BDCBB6285C0.jpg
http://img.photobucket.com/albums/v316/papananamous/7CDF5294-3450-4D62-B8CA-1E9B66A46BE2-14543-00001BDCC5EE6FD4.jpg

Hello Kitty
08-05-2013, 11:53 PM
Looking good! Double d, heavy metal does glass and t-donk if needed?

procircuit
08-09-2013, 07:19 AM
http://img.photobucket.com/albums/v316/papananamous/windows.jpg (http://smg.photobucket.com/user/papananamous/media/windows.jpg.html)


windows all in, huge motivation booster.

HEAVY METAL
08-09-2013, 08:24 AM
now that I've seen this car in person... its crazy sic!! alot of little things went into this car and thats what gets me . job very very well done.

procircuit
08-09-2013, 08:47 AM
now that I've seen this car in person... its crazy sic!! alot of little things went into this car and thats what gets me . job very very well done.

Thanks again dood!

procircuit
08-11-2013, 08:25 PM
Finished off the majority of the Interior, sent rear seat out for upholstery last week..carpets fit, headliner,rear package tray and speakers...Rest of dash pieces installed, made up a radio plate with some billet push switches and a dial for heater..shifter, handbrake.. Any other little things I came across..

Started out a rainy day
http://img.photobucket.com/albums/v316/papananamous/FB47C71F-9907-4B36-8833-E7AE8EB22EB4-3525-000006C76A4333AE.jpg
http://img.photobucket.com/albums/v316/papananamous/93621FA5-85A6-4B20-B7CE-FC719EA8D18B-3525-000006C774094B36.jpg
http://img.photobucket.com/albums/v316/papananamous/78AF8EB9-9DE4-4649-8DBB-902D083256AB-3525-000006C7F00D0BB0.jpg
http://img.photobucket.com/albums/v316/papananamous/ED50997C-F14A-4D9E-934F-E73A92B20EA8-3525-000006C7B0CDC739.jpg
http://img.photobucket.com/albums/v316/papananamous/843E1411-B4A7-454A-A9F2-0DF7CC4F9057-3525-000006C7B721A3FE.jpg
http://img.photobucket.com/albums/v316/papananamous/ABF06139-FEEA-4E7E-A6C2-1924A33D9056-3525-000006C7C5C85DDB.jpg
http://img.photobucket.com/albums/v316/papananamous/FFC927EE-EA22-4614-8FCF-935890C60850-3525-000006C7DCD66B27.jpg
http://img.photobucket.com/albums/v316/papananamous/CB7C1FD2-81C3-4E98-85A6-6A44F557FC2A-3525-000006C7D8977A59.jpg
http://img.photobucket.com/albums/v316/papananamous/F8B50092-1BB6-4A64-BD3A-E44E080392C0-3525-000006C7CE63858B.jpg
http://img.photobucket.com/albums/v316/papananamous/FA74A26A-E482-45AB-B401-AA5A0B316D3A-3525-000006C7F442B2BA.jpg
http://img.photobucket.com/albums/v316/papananamous/15E23713-B3D9-433F-98F1-7DE4ECA8F68B-3525-000006C7FC87A985.jpg

Happypants
08-11-2013, 08:54 PM
Lookin pretty slick!!! Good job! Got it running yet?

procircuit
08-11-2013, 09:12 PM
Lookin pretty slick!!! Good job! Got it running yet?

Thanks!.. Would just need a splash of gas and hook up the terminals on the battery..

Ill wait till last, it'll be more rewarding

Happypants
08-11-2013, 09:23 PM
[36][36]

procircuit
08-15-2013, 07:18 PM
Assembled door guts put the glass in and the panels on.. Installed all the side and window trim as well as seals tonight....Just a few little things to go.

http://img.photobucket.com/albums/v316/papananamous/851FD5F1-C1E2-45DC-90E0-3A4F49645F3F-6799-00000B9FDE217EA7.jpg
http://img.photobucket.com/albums/v316/papananamous/4F9BF5F2-93C0-4F0B-A13E-8835D5E050F7-6799-00000B9FE318EA6F.jpg
http://img.photobucket.com/albums/v316/papananamous/0CBBC68F-7A5F-405D-B4C6-5C401B83503F-6799-00000B9FE73F9125.jpg
http://img.photobucket.com/albums/v316/papananamous/FF63E81F-35E7-445C-B9DF-B8A3FEBC15EC-6799-00000B9FEBB370CD.jpg
http://img.photobucket.com/albums/v316/papananamous/FA104682-5E05-47CB-873D-0CA62E7031AA-6799-00000B9FFD0A81CE.jpg
http://img.photobucket.com/albums/v316/papananamous/7900C8A7-A0EA-45EE-AE6B-168C69E9EA84-6799-00000BA005EE9F6D.jpg
http://img.photobucket.com/albums/v316/papananamous/285F68CA-82F9-48C2-A2C8-3702BBD714CD-6799-00000BA00E9C24EA.jpg

Blacked out trim FTW.[cheers]

Pudge
08-16-2013, 07:01 AM
Fuck'n A bubba!!!! So sweet, nice job bro!!!

P

procircuit
08-16-2013, 07:27 AM
thanks dood! can't wait to drive er..

4skin
08-16-2013, 11:53 PM
What no smoke shows yet

SHITTY
08-17-2013, 09:28 AM
looks like the rear passengers have a solid HOLY SHIT handle. its looks like a roller coaster bar. shut up sit down and enjoy the ride. nice work head turner show stopper for sure.

procircuit
08-17-2013, 06:52 PM
What no smoke shows yet
I'm going as meticulously OCD fast as I can lol!

looks like the rear passengers have a solid HOLY SHIT handle. its looks like a roller coaster bar. shut up sit down and enjoy the ride. nice work head turner show stopper for sure.

Haha thanks eh! Ill give the rear passenger a lap belt lol

procircuit
08-22-2013, 08:32 PM
http://img.photobucket.com/albums/v316/papananamous/BCB87A5C-7C5D-490C-873F-B5EDFDF0A80E-11808-000014B4FFFD29FE.mp4

85chevy
08-22-2013, 08:33 PM
Damn nice[cheers]

procircuit
08-22-2013, 09:34 PM
Bleed the brakes.. Alignment... Seats and drive

epic3
08-22-2013, 09:39 PM
Bleed the brakes.. Alignment... Seats and bakers
Fixed....youre welcome

procircuit
08-23-2013, 06:40 AM
Fixed....youre welcome
:party0010::party0010:

Chody
08-23-2013, 08:38 AM
bet ya that feels good,Congrats

Tinker
08-23-2013, 11:26 AM
Now what you need is a 97 4runner to turn into a family wheeler......

procircuit
08-25-2013, 07:42 PM
Now what you need is a 97 4runner to turn into a family wheeler......

But how would I sneak out for a day if the family came:dontknow: :party0010:

procircuit
08-25-2013, 07:42 PM
Sooo made a little catch can.. Bled brakes.. Picked up the finished rear seat and reassembled interior and installed seats/belts.. Happy happy happy

http://img.photobucket.com/albums/v316/papananamous/678DF206-A0DE-4E6F-B6AC-D0114508AE12-13051-000017A7A2202A2A.jpg
http://img.photobucket.com/albums/v316/papananamous/A0B7FFE2-B507-4BC2-A1C4-2C2C1E9EF2EE-13051-000017A7A6A14941.jpg
http://img.photobucket.com/albums/v316/papananamous/584C8745-E16B-4D20-8D9C-1EC2C2EF7F23-13616-0000192048AB771F.jpg
http://img.photobucket.com/albums/v316/papananamous/780EE0FB-94E2-4B7F-8EA8-A9A9341FAD82-13616-00001920CC0D4B92.jpg
http://img.photobucket.com/albums/v316/papananamous/A110A785-37DA-4D30-8071-D5EFDD62D832-13616-0000192086A27A11.jpg
http://img.photobucket.com/albums/v316/papananamous/E77CB08C-679F-47D3-8D6A-49CD3B107354-13616-00001920B7FDB962.jpg
http://img.photobucket.com/albums/v316/papananamous/6340DB87-4D39-47B7-A924-16661366E33A-13616-00001920B2998355.jpg
http://img.photobucket.com/albums/v316/papananamous/0AB0229D-A681-4698-A283-27310783A28D-13616-00001920BC10B146.jpg
http://img.photobucket.com/albums/v316/papananamous/B5293ED9-1CCD-4684-98A8-23D4E7FB29C6-13616-00001920997964C3.jpg

And a little vid when I put her to bed.
http://img.photobucket.com/albums/v316/papananamous/5C94F2A3-910F-44D3-B5B5-9502ED4E5EA4-13616-0000192125B1EB80.mp4

atoyot
08-25-2013, 08:12 PM
thats a good lookin car u built bud.....
.
.

.
.
.

procircuit
08-25-2013, 09:19 PM
thats a good lookin car u built bud.....
.
.

.
.
.

Thanks dood[cheers]

85chevy
08-25-2013, 09:25 PM
Yup sure did a nice job [cheers]

procircuit
08-26-2013, 06:35 AM
issue with the rear brakes binding a bit, going to try and sort that out tonight and get an alignment setup tomorrow

Chody
08-26-2013, 07:20 AM
my god, shes b-e-a-utifull.

procircuit
08-27-2013, 09:10 PM
Exhausts all finished, comes home in the morning.. Alignment and drivey drivey

bcmaxx
08-27-2013, 10:20 PM
Wow!! Nice clean. Very tidy project!!!!!!something to be proud of!

procircuit
09-13-2013, 08:24 PM
Was a nice night for a cruise..

http://img.photobucket.com/albums/v316/papananamous/5BACE3FA-02C2-41A2-8594-BBB9AD0EEF2C-2710-0000040AFE1309AD_zpsc8b35394.jpg
http://img.photobucket.com/albums/v316/papananamous/E5A6B844-B917-4BE0-B6D3-105BE10C30E6-2710-0000040B04786443_zps80a40285.jpg
http://img.photobucket.com/albums/v316/papananamous/EC09BD3B-276A-4E96-B8FC-568D950C2AC8-2710-0000040B0C0C55C2_zpsf1e4a8fe.jpg
http://img.photobucket.com/albums/v316/papananamous/EC00BEB3-7E7A-47C9-9DF6-9D6CC1CC5A6D-2710-0000040B10A3614B_zps55fa395d.jpg
^^ doors popped open(why lines are out)

nbrowser
09-13-2013, 08:34 PM
Absolutely well done man, not garish or overdone, the stance is right, the wheels are the right size, there's some sidewall there. I like the overall look, done right.

atoyot
09-13-2013, 10:24 PM
was a nics night for a cruz......
car looks sweet rollin bud.....
well chat more nextime:D

4skin
09-13-2013, 11:28 PM
What still no smoke show pics

toyotaAlex
09-14-2013, 12:40 AM
love the matte black. looks sickkk!

78bronco
09-14-2013, 10:17 AM
looks sick

Chody
09-16-2013, 03:59 PM
i still see rubber on the tires....

jeep wrangler
09-16-2013, 08:47 PM
nice ride, any smoke show pics

atoyot
09-16-2013, 10:23 PM
............ peer pressure ..............

burnout pixx.......or vid:)
[36]

4skin
09-16-2013, 11:01 PM
Smokem if it can or is it one of those not rods
We want burnouts :party0010:

Ginger Snaps
09-17-2013, 06:21 AM
Went for a ride on Sunday car is baaadassss good work buddy!

procircuit
09-17-2013, 06:59 AM
Went for a ride on Sunday car is baaadassss good work buddy!
[cheers]


couple more days of driving and everything should be happy and set... maybe one burn out vid before it goes away for winter, just need someone to video.
:dontknow:

dirka dave
09-17-2013, 07:02 AM
Good to see you two, that's a very clean and uncluttered car.

I could hear you guys all the way to the golden ears bridge !!

Thanks for signing my driveway !![36]

Hope you guys made it home before the thunderstorm.
Maybe you should have left the wipers on ! :dontknow:

atoyot
09-17-2013, 10:04 AM
[cheers]


couple more days of driving and everything should be happy and set... maybe one burn out vid before it goes away for winter, just need someone to video.
:dontknow:


i got a couple... could do some different angles if its a good one....
say when n where ...ill pop out n film ya bud...[36]

Chody
09-17-2013, 10:07 AM
just bought a dslr with 1080p... hd burnouts?

procircuit
09-17-2013, 10:56 AM
Well I have a burnout pad infront of my shop... Beers this weekend?!

atoyot
09-17-2013, 11:15 AM
Well I have a burnout pad infront of my shop... Beers this weekend?!

sounds like a date....[36] ..............
minus the date rape and add the burnouts...:D
.got 3 things to film with,ill do different angles n edit em together:)
makes me want to melt tires as well:happy0045:

.which day u thinkin?
fri night cruze/then melt some tires? or
sat day/eve/night or
sunday/eve
?
.
.

procircuit
09-17-2013, 01:16 PM
most likely a saturday afternoon evening dealio, weather permitting.

atoyot
09-17-2013, 03:08 PM
okdokay.........[36] [36] [cheers]
..

.

.

epic3
09-17-2013, 03:51 PM
still not seein smoke

procircuit
10-02-2013, 01:39 PM
http://img.photobucket.com/albums/v316/papananamous/null_zps228b4014.jpg (http://smg.photobucket.com/user/papananamous/media/null_zps228b4014.jpg.html)
http://img.photobucket.com/albums/v316/papananamous/null_zps2e48010f.jpg (http://smg.photobucket.com/user/papananamous/media/null_zps2e48010f.jpg.html)

Pudge
10-02-2013, 02:24 PM
Niiiiice :) burnt rubber is awesome

dirka dave
10-02-2013, 02:33 PM
The one you left at my place was kinda weak.

Do better next time dammit. !!go fuck yourself

procircuit
10-02-2013, 02:47 PM
The one you left at my place was kinda weak.

Do better next time dammit. !!go fuck yourself

that was still shakedown day

dirka dave
10-02-2013, 03:24 PM
Excuses.[16]

vajayjay
10-02-2013, 08:01 PM
Thats not even your street, you just found a set and took pics [16]

procircuit
04-29-2014, 02:34 PM
Such a shame that all the pictures are fucked... ill go thru this entire thread and redo all the pics... fuck thats gonna take awhile lol

Tinker
04-29-2014, 03:36 PM
Such a shame that all the pictures are fucked... ill go thru this entire thread and redo all the pics... fuck thats gonna take awhile lol

SAIL!:D

procircuit
04-29-2014, 04:53 PM
SAIL!:D

Page 1,2,3 I've started, only 28 more to go!

procircuit
04-30-2014, 02:47 PM
updated to page 7.. fml

Tinker
04-30-2014, 03:02 PM
mindless time killing, its a good thing ;)

atoyot
05-01-2014, 11:44 AM
this thread sucks without pixx.....:D Rice

procircuit
05-05-2014, 08:47 AM
made it to page 16 before i started to go coo coo this morning

atoyot
05-05-2014, 12:14 PM
half way there......
.
.

..
.
.
in alot of threads this all wouldnt be necessary,...
but it was such an awesome build ,
glad ur doin the work to keep the pixx in it so we can still see the build!!!!

procircuit
05-05-2014, 01:18 PM
shhhhh ill spill the beans, its ends up looking like this
http://img.photobucket.com/albums/v316/papananamous/Malibu/780EE0FB-94E2-4B7F-8EA8-A9A9341FAD82-13616-00001920CC0D4B92.jpg (http://smg.photobucket.com/user/papananamous/media/Malibu/780EE0FB-94E2-4B7F-8EA8-A9A9341FAD82-13616-00001920CC0D4B92.jpg.html)

procircuit
05-24-2014, 09:26 PM
Her first night out this year.

http://img.photobucket.com/albums/v316/papananamous/Malibu/1EB28981-09A6-4570-9655-DF3BDD5365EA.jpg (http://s.photobucket.com/user/papananamous/media/Malibu/1EB28981-09A6-4570-9655-DF3BDD5365EA.jpg.html)

procircuit
05-30-2014, 05:11 PM
http://img.photobucket.com/albums/v316/papananamous/Malibu/1981E7FD-F60D-4B43-AD8A-4FAE718DCA12.jpg
http://img.photobucket.com/albums/v316/papananamous/Malibu/C4ED39A1-FE3F-4720-938E-98CC2A50EA2D.jpg
http://img.photobucket.com/albums/v316/papananamous/Malibu/5FF13592-535A-4B3E-A76D-8E7FA450DD4F.jpg
http://img.photobucket.com/albums/v316/papananamous/Malibu/86D1FFF0-DC97-4ED4-A0DC-A0E74B2023CE.jpg

Allll ready to go

78bronco
05-31-2014, 10:58 PM
very nice

Chody
06-02-2014, 08:08 AM
its ok i guess, if u like nice things

Chody
06-02-2014, 08:08 AM
let me just clean the spooge off my screen

procircuit
06-02-2014, 08:28 AM
I cleaned the dust off underneath this weekend http://img.photobucket.com/albums/v316/papananamous/Malibu/9C3D4311-08D1-4B38-82D1-E4E5AA82A722.jpg (http://s.photobucket.com/user/papananamous/media/Malibu/9C3D4311-08D1-4B38-82D1-E4E5AA82A722.jpg.html)

procircuit
06-02-2014, 08:28 AM
Then back to the garage.. Didn't want to get it dirty
http://img.photobucket.com/albums/v316/papananamous/Malibu/2FBF439B-C4F3-422A-9DC4-E4B909513CD2.jpg (http://s.photobucket.com/user/papananamous/media/Malibu/2FBF439B-C4F3-422A-9DC4-E4B909513CD2.jpg.html)

Honky
06-02-2014, 08:38 AM
that is all purdy like

85chevy
06-02-2014, 08:24 PM
Kinda surprised there is still rubber on those tires figured u would of smoked them off:dontknow:

The King Machine
06-02-2014, 08:32 PM
Looks sharp.

Nice car

procircuit
07-31-2014, 06:04 PM
Been out a few times this summer
http://img.photobucket.com/albums/v316/papananamous/Malibu/479E2F40-FCA8-4DCB-87D4-0B38DF46C92D.jpg (http://s.photobucket.com/user/papananamous/media/Malibu/479E2F40-FCA8-4DCB-87D4-0B38DF46C92D.jpg.html)
http://img.photobucket.com/albums/v316/papananamous/Malibu/3AA94242-9C0C-47E1-AD49-A0DC6BD70A06.jpg (http://s.photobucket.com/user/papananamous/media/Malibu/3AA94242-9C0C-47E1-AD49-A0DC6BD70A06.jpg.html)
http://img.photobucket.com/albums/v316/papananamous/Malibu/843BF622-DCC7-4923-BF8A-ABC217B50F10.jpg (http://s.photobucket.com/user/papananamous/media/Malibu/843BF622-DCC7-4923-BF8A-ABC217B50F10.jpg.html)

Happypants
07-31-2014, 06:40 PM
And still no burnout pics

epic3
07-31-2014, 07:18 PM
yeah wtf!?