PDA

View Full Version : TJ Exhaust routing HELP in the LM


Lieutenant Johnson
04-26-2012, 03:09 PM
So I need to tackle this issue properly asap ... For about a year I have had my rear passenger shock being rubbed by my tailpipe (see damage in pic 1) :whistle:..

so now I have put cat back in and moved it away from the shock so it can clear, a little late obviously , BUT now it hits the rear trac bar when fully flexed (see pic 2) . It was a compromise based on the way my exhaust snakes to the rear after the muffler. I had to clear that shock but when I did that , without moving my exhaust lower to the ground, it mad it closer to the trac bar

Is there anyone in the LM than can help a brotha out , and fix this issue.
I am sure there is someone out there thirsty for beer ... just need to cut off after muffler and bend in a way that is best for both the shock and trac bar . [cheers]

Happypants
04-26-2012, 04:37 PM
cut it, put a flex pipe in, then weld it to the track bar, :D

Lieutenant Johnson
04-27-2012, 10:34 AM
So no one does exhaust work?


Thanks for the reply Nick. Looking to bend and keep away from trac bar

Punk in Drublic
04-27-2012, 11:42 AM
flex pipe is your friend

Lieutenant Johnson
04-27-2012, 11:54 AM
flex pipe is your friend

Yeah but weld it to the trac bar :dontknow: doesnt make sense

Punk in Drublic
04-27-2012, 12:35 PM
dont listen to everything he says. you gotta filter the dumb thoughts and just take the good.

Happypants
04-27-2012, 01:05 PM
Yeah but weld it to the trac bar :dontknow: doesnt make sense

Lol, I threw that in there just to confuse you :D and by the looks of it, it worked,Goto a exhaust shop and show them what you want done and see if they can Bend u a Peice for your exhaust,

Happypants
04-27-2012, 01:08 PM
Or quit being a bitch and deal with it....bitch :D

BleepinJeep
04-27-2012, 01:29 PM
I think free is the idea here

Happypants
04-27-2012, 01:46 PM
Meh, cheapass :D

trailburban
04-27-2012, 09:48 PM
exit before the tire, no interference with anything. drop it under the frame with some 2x4 oval pipe.
and yes there room for a muffler and cat and to exit before tire.

other options:
possibly to cross and go along other side of jeep
run it inside frame rail
turn hedders upside down, run round cats straight up with no mufflers :D

4Lo
04-27-2012, 10:13 PM
Drill a hole through the floor then through the roof and run a stack.;)

You can thank me later.:D

Lieutenant Johnson
04-27-2012, 11:03 PM
I think free is the idea here



Willing to pay a fellow wheeler to do it rather than some jap at the corner muffler shop :dontknow: found somone on monday night to help put a notch and bend and reweld

And yeah Nick u got me ...too many doobiea when reading it ...bitchgo fuck yourself

Cheese eyes
04-27-2012, 11:23 PM
I can help.. call me tomorrow 604-590-6077. Mike [cheers]

fullsizebronco
04-28-2012, 01:05 AM
Drill a hole through the floor then through the roof and run a stack.;)

You can thank me later.:D


[36]

Lieutenant Johnson
04-28-2012, 11:01 AM
Thanls mikey ! Will cya on monday