PDA

View Full Version : Ujoint question


Bigsexy
04-18-2012, 07:57 PM
I am running a 93 f150 rear driveshaft, but have a 14b now in my rear.. Anybody know what ujoint to ask for? OR is there even a combo for that.. i checked 14b bible but couldnt find anything

Happypants
04-18-2012, 08:33 PM
Prolly gonna have to change your driveshaft to accept a bigger u-joint, or change the yoke on the 14 bolt to accept the same u-joint as your
F-150's driveshaft, there around 75-100 bucks from yukon

Don't bother
Trying to find a combination joint for it,

stockwheels
04-18-2012, 08:37 PM
call and ask lordco u never no what u find im running combo u joints from baby ford to bigger ford lol

Happypants
04-18-2012, 08:37 PM
http://www.ringpinion.com/DiffWizard.aspx

85chevy
04-18-2012, 09:21 PM
Measure them and then go into the parts store

4skin
04-18-2012, 11:29 PM
Measure them and then go into the parts storetake both u joints if you have them to match width and diameter of caps

crimsen
04-19-2012, 07:55 AM
http://www.therangerstation.com/Magazine/summer2008/ujoints.htm

Read the whole thing. Then find out what ujoint is needed in both. Best to confirm with a micrometer. You may simply be able to change the caps on a specific ujoint to work if the cross sections are the same, or get a conversion joint if it is not.

Bigsexy
04-19-2012, 06:51 PM
thanks crimsen, by the looks of it, i needa 1310-1350 combo joint.. [cheers]

D-Ass
04-20-2012, 12:55 AM
thanks crimsen, by the looks of it, i needa 1310-1350 combo joint.. [cheers]
common U joint most every auto parts store does have combo joints lordco will have it on the shelf.

Apathy
04-20-2012, 11:13 AM
common U joint most every auto parts store does have combo joints lordco will have it on the shelf.

normally called a "conversion" joint.

very common, i used to run a 1310-1330 conversion joint.