PDA

View Full Version : RE-arching leaf springs


Happypants
02-26-2012, 05:14 PM
what spring shops you guys use to get springs re-arched? i wanna get my RE springs re-arched and wrapped cause my rear tires are starting to rub alot when i go around corners from body roll, and pot holes making the tires rub too, prolly should get some rear shocks too lol

Casselman
02-26-2012, 05:20 PM
I used Scott spring in surrey

Happypants
02-26-2012, 05:24 PM
how much?

MOOSEHUNTER
02-26-2012, 05:43 PM
carrier spring in abby new springs for the front of my truck were 250

4Lo
02-26-2012, 06:14 PM
What moose head said. I also used carrier spring and was very happy with tyler's work. Reasonably priced as well.

Happypants
02-26-2012, 07:00 PM
Ya Tyler does good work, they re-geared my old xj, was just looking for something closer to home, but eh,

Murd0c
02-26-2012, 08:06 PM
I've been to Scott spring before and they were pretty good

Casselman
02-26-2012, 10:14 PM
Yeah Scott spring is bout the same price as abby

Griswold
02-27-2012, 10:23 AM
Cody works at Abby Spring you could check with him

Happypants
02-27-2012, 12:50 PM
Carrier spring, 150 for both, [36]

youngun
02-27-2012, 01:01 PM
If anyone in the okanagan area is looking to get this done, I have done them lots and can do it for you.

T-Kase
02-27-2012, 02:45 PM
We do it here too!!!

youngun
02-27-2012, 03:06 PM
Carrier spring, 150 for both, [36]

Thats around what I charge, depending on how many leafs are in the pack of course and if a new center pin is needed

Happypants
02-27-2012, 03:17 PM
I dunno, there rubicon express 5.5" lift springs, 8-10 leafs I think

Happypants
02-27-2012, 03:17 PM
We do it here too!!!

Where might that be Casey?

T-Kase
02-27-2012, 04:14 PM
I'm at national tire wholesale/ national spring in burnaby. I have to ask my boss how muchy when I see him tomorrow.
Or you can call 604-294-3788 and talk to Gorm. I'm just learning spring and suspension, tires are more my thing at this
point. :D

Happypants
02-27-2012, 04:17 PM
Aiight, thanks

keadyn
02-27-2012, 05:27 PM
Main Road uses Scott Spring for all their fleet trucks.

B
02-27-2012, 05:45 PM
id just use a add a leaf personally ive always found and re arced springs just sag again real fast just... my2c

F150HULK
02-27-2012, 05:51 PM
try and locate Dave from T&S he builds custom arc springs. not cheap but you get what you pay for from him. had stage 2 in the back of hulk. they were sweeeeeet!

Happypants
02-27-2012, 07:26 PM
i still wanna have the same soft ride that i had before, and ya bryson i hear ya on the add a leaf thing, im kinda debating on trying to pull the leafs out cause i dont wanna fuck with that weld in nut in the unibody, i gonna send ya a pm dood

Bigsexy
02-28-2012, 09:08 PM
use ur main as the add-a leaf and get a new main made up with a bit of arc.

Happypants
02-28-2012, 09:44 PM
hmmmm ya i dunno, it too cold to do anything right now lol :D