PDA

View Full Version : putting on the apron


3.3 Over
02-11-2012, 05:04 PM
or aprons, lol

last weekend doing my booster i had taken er for a test and up goes the hood, (and it could have been a badder thing as i was a tad drinky) heh heh heh

yeah i had to change em both anyways but i was holding back, needless to say - i kinda forced to do em or park it,.

these are where i left off today, i wasnt gonna do the entire front end (rad support, etc, etc) but since i have spares and there is nada left on the old shitz to hold bolts - well, - the project got a bit bigger

o ya , popped a new 'relief' hole in my rad in the process today (fuckity fuck fuck :eek: )

Hello Kitty
02-11-2012, 07:40 PM
Gonna be good fixed! No more worries, zap straps or bungles
:D

Punk in Drublic
02-11-2012, 10:00 PM
sweet dude. dude sweet.

skyjacker
02-11-2012, 10:40 PM
Nice man [cheers]

3.3 Over
02-18-2012, 11:10 AM
fuken rain!! :mad:

i had to wait til decent hours this morning to shop vac large puddles out of the sagging tent before collapse

All good now and just came back home with new set o shocks, steer stab, (all boots) and yay ! new fender fasteners/u bolts

64CJ6Willy
02-18-2012, 11:46 AM
Under the kaniff time eh.

3.3 Over
02-21-2012, 04:04 PM
well im rained out kinda as far as working on truck goes ...

but i did get my rad back - one of the last of the last brass rad repair shops, all brazed up ready to go back in (still need spares though, lol)

mattdroz
02-21-2012, 04:54 PM
"surrey recycles" lol

3.3 Over
02-21-2012, 05:26 PM
LMAO

100 repair or 230 (can tire) - 300 (lordco) new for this baby so you betcha kiddo !!!

[cheers]

BuckNaked
02-22-2012, 06:11 AM
holy fuck!

3.3 Over
02-22-2012, 08:47 AM
holy fuck!


thats what i said hah hah
and there is no core on it either

procircuit
02-22-2012, 09:05 AM
Haha damn

T-donk
02-22-2012, 01:01 PM
ha ha ha when i had mine like that i always went through rads i remember 4-5 on a may long lol

3.3 Over
02-23-2012, 09:37 AM
was nice to have no rain yesterday.

I was going to do the shocks and other things now while is nice and open but with the reports of big rain coming i think its best to get fenders and a hood back on here

time to pull rad support and inner apron bracket off the 71 and get moving on this fast heh heh

here's where i left it yesterday

3.3 Over
02-23-2012, 09:40 AM
ha ha ha when i had mine like that i always went through rads i remember 4-5 on a may long lol

yeah if u look at or touch these things the wrong way they leak, hah hah

in all seriousness; aside from the punture i put in it with a fastener its been issue free for me for last few years, but ya i should upgrade soon :confused0006:

3.3 Over
02-23-2012, 08:00 PM
another good weather day and got to spend time on the truck some more, heh heh

had to do a bit o fab on the driver side inner, and the neighbor, doug the polack, came over to put in the front shocks, lol

bunch of new fasteners and away i go lol

i need to hustle up cuz i gots me some bran new 35's to mount up hah ahh

Punk in Drublic
02-23-2012, 08:31 PM
fucck yea giterdun

64CJ6Willy
02-23-2012, 10:47 PM
Gonna be mighty fine.

3.3 Over
02-25-2012, 08:32 AM
Pho Boi did it pizz down yesterday !

i muscled thru it and im up to this, just gotta place wiring, batts, finish mount grill, rad and then hood

since alot of the donor parts are off multiple trucks its not like i could mark everything so i'll see how my eye balling worked out when it comes time to close the hood, lol

everything is tad loose for that readjustment still heh heh

3.3 Over
02-25-2012, 07:30 PM
jeezuz unreal, lol

still a few adjustments and minor shit to put in, fill rad, etc but event tent is down, tools away, hood is closed

Whoo fuken hoo ! :run away

time to rinse off the grease particles and buck off to the island for a few days !!

next week its the new trail diggers and then testing em out sat !!

64CJ6Willy
02-25-2012, 07:38 PM
event tent is down

Whoo fuken hoo ! :run away

!

Looks Great! Love the tent idea. Attracts all the neighbours to the show.

3.3 Over
03-04-2012, 06:39 PM
heh heh

when re and re'ing front clip parts one of the rad support holes thru frame was gone gone gone and i mean no more frame even close to the rubber grommets lol

no plate or welder on hand at that time but ill do it up right when i cab swap later on

in the mean time, i hit kyles place and got er stronger than ever probably with an underside weld with all parts still in place

good thing or it would have been hell yesterday if not with 'issues' had we not done it up

[cheers]