PDA

View Full Version : adapter plate


F150HULK
12-29-2011, 09:16 PM
is there an adapter plate from 6 lug to 5 on 4.5?

64CJ6Willy
12-29-2011, 09:36 PM
If there was that wasn't massively custom made with a huge expense I would have ran the rims I traded with Todd.

F150HULK
12-29-2011, 10:23 PM
http://adaptitusa.com/6x139.7mmto5x114.3mmwheeladapter-3.aspx

I think this is it. pic aint right tho.

Always broke
12-30-2011, 12:01 AM
Just change the knuckle over to the right pattern from what I have heard the adapters make a weak point weaker so just change it over :)

MacGyver
12-30-2011, 12:09 AM
Or you could possibly change the axle shafts over to custom ones. Chance to upgrade to chromoly, not sure of your application but I did this to change my 8.8 to 6-bolt from 5-bolt :)

Tunabomber
12-30-2011, 01:20 AM
is there an adapter plate from 6 lug to 5 on 4.5?


i feel your pain rod :pet

Nutbar
12-30-2011, 08:39 AM
Either change the spindles and wheel bearing hubs on the frt to 5x5.5 and get the super 88 kit for the rear (axle shafts are dual drilled for 5x5.5 and 5x4.5) or get custom cut 6x5.5 axle shafts for the rear

F150HULK
12-30-2011, 07:24 PM
i guess its all about the $$$$$$. just looking for the least exensive way to upgrade the yj to a 44 in the front. the rear is already upgraded with a 9" and mollys with 5 on 4.5. looks like its still going to be a while anyway the fucking dodge has liqudated all my funds.:(

4skin
12-31-2011, 07:04 PM
if they make a adapter why could you not just get the hubs and rotors redrilled???