PDA

View Full Version : need info on cut out flares on a 05 350


trailburban
09-21-2011, 09:24 PM
i'm looking at putting cut out flares on a '05 f350 with only a leveling kit for a lift (about 2")

bushwacker couldn't give me a straight answer and neither could any website i looked up.

So, for people that have installed them...
1) how wide is the wheel well with the cut out fenders installed
2) how much taller is the wheel well
3) what size tires would you predict i could run with say a 1" lift (guessing either a 35 or 37)
4) how much farther did you off set your rims when you installed them

I know someone here will be able to answer this, It's funny how bushwacker can't.

thank you

shoobear
10-11-2011, 10:48 PM
you can run 35's with a leveling kit...no cut out flares needed..just pocket flares.

fullsizebronco
10-12-2011, 07:28 AM
We ran 35s on a stock f350 so with cut outs and a leveling kit I would have to say you would be real close to fitting 40s try looking up images on Google. I'm sure there will be a few

Troy
10-12-2011, 01:09 PM
35's and leveling spacers is a good look. looks proportioned

deer laredo
11-03-2011, 04:35 PM
40's go big or stay home!!!

epic3
11-03-2011, 04:56 PM
We ran 35s on a stock f350 so with cut outs and a leveling kit I would have to say you would be real close to fitting 40s try looking up images on Google. I'm sure there will be a few

wont be able to turn without rubbiing

hornythrony
11-19-2011, 05:14 PM
both my father inlaw and i have 05's with leveling kits just up front and are both running 35x12.5's on stocker rims and no rubbing and we get into some akward spaces with them when se go quadding or camping