View Full Version : need second hub or better pair...
04-12-2011, 07:22 AM
Cracked one hub on plow truck and it blew apart since bolts always back off. Put f\t hubs on for now with a lock tab the goes straight across 2 bolts and the ends bend up so bolts cant back out. I cannot use my current homeade tabs with this mm hub in pic below unless I notch them so they go around hump betweemn each pair of holes in the mm hub style.
04-12-2011, 05:22 PM
is that d44 or d60? im sure ive got 3 or 4 dana 44 hubs kicking around in my garage... 19 spline or something..
04-14-2011, 08:27 AM
Dana 44, no sure how many splines yet I can check...
04-14-2011, 12:17 PM
those are the heavy duty 44 had them on my old diff try to find used cause they are really expensive .....
04-15-2011, 09:24 AM
Yes, came out of gmc\chev 1975 3/4 ton pick-up. As for heavy duty how is it better than a regular dana 44? It was matched to the diamond shaped pumkin d60 rear with 10.5" ring gear. Truck had 400 sb yet that 400 I sold 7 years ago.
04-19-2011, 11:19 AM
that diff has bigger everything the spindles are bigger too
04-20-2011, 09:24 AM
I was told the only differences are the 8 bolt hub and spindles. Are axle shafts thicker than 1/2 ton dana 44? MM Hubs cost me $100/pair new... came with useless lock tabs though. Maybe warn has better style lock tabs to keep 3/8" bolts from backing out.... Once one mm hub blew apart I put stock iron f\t hubs back on with a strip of steel with ends bent over across two bolts so 3 strips per hub. Now they never back out lol!!
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.