PDA

View Full Version : and done its dead


4skin
04-03-2011, 07:58 PM
so pretty sure the runners done after today
went to east stave with griswold and animal who shall be forever known as flopper
mose hunter has video of the start of mines demise lol
and video of how to open a 4 runner door
kind of got stuck
blew a hose or gasket under intake manifold
water just pisses out quiker than you can add it
charging system quit to
so drove it up to trailer got it on trailer was knocking bad
now it wont turn over:dontknow:
is that bad lol time to strip it
any body need any body pannels slightly dented[15][15][15][15]
and then i had a flat on the trailer
without a spare
was a awesome day

Honky
04-03-2011, 08:04 PM
lol sounds like a great day!!!!

C-Dog
04-03-2011, 08:04 PM
So she's finally dead eh took ya long enough jeeze

4skin
04-03-2011, 08:16 PM
140985rest in pieces:D

atoyot
04-03-2011, 08:19 PM
.....
its not dead...............................



its just resting......
.
.

Evan the Blue
04-03-2011, 08:36 PM
Quite frankly I'm very surprised it has lasted as long as it has
* Playin' Taps & saluting * We are gathered here today to honor a brave soldier who served well under very adverse conditions lol

vajayjay
04-03-2011, 09:08 PM
Did you finally drive it hard and quit babying it?

youngun
04-03-2011, 09:26 PM
Was a cool truck, now you gotta get the new rig finished!!!

MOOSEHUNTER
04-03-2011, 10:09 PM
great day awsome pics and video will post them tomorrow[cheers]


animal
[1a]

Griswold
04-03-2011, 10:16 PM
there are some killar vids from today for sure.
will download what I got for pics.
Great day out there today.
and here they are........................[cheers][36]
141001

141002

141003

141004

141005

141006

141007

141008

141009

141010

141011

141012
Thanks for the great day out there today guys.[cheers][36]

atoyot
04-03-2011, 10:18 PM
Knock is caused by low oil flow or a blocked passage.Usually gunk or gum from over used oil,or the crap in the bottom of the pan was sucked up into the oil pump and pushed around the engine.. If you would like to try getting rid of the knock, try some of the best internal engine cleaner out there.(AMSOIL internal engine cleaner) I have a couple bottles if you can't find any.
After it is cleaned, drain and fill with 5/30 detergent oil,(pennzoil has a good product) and run for a couple weeks. Flush again then fill with 10/30. Use a higher grade oil filter for your first refill.

If it has been knocking for a while, chances are the bearing won't last. If it hasn't been run very much with the knock, you should be able to save the bearing by cleaning it well with the engine flush.
__________________

do u need this guys advice....mr bruceskins hahaahahahahahah

hahahahahah

mini
04-03-2011, 11:00 PM
how the fawk did andrew flop right there?

Griswold
04-03-2011, 11:09 PM
how the fawk did andrew flop right there?

Ha Ha Ha he had some hotties in his truck and he was showin off and paniced......and.............:dontknow::vroam:
every one was OK it was just really Animal[cheers]:party0010:

MOOSEHUNTER
04-03-2011, 11:10 PM
back tire hit a rock way up the bank then he layed on the brake. OVER !!!

Bent Black
04-03-2011, 11:11 PM
[cheers] that looks like a good time, nice pics![cheers]

Griswold
04-04-2011, 07:31 AM
Ya too bad it blew the hose there....never seen any one go threw that way....By By 4runner was great wheeling with it.

youngun
04-04-2011, 11:33 AM
The hot chicks aways screw ya, sometimes in a good way, but usually in a bad way like that

Griswold
04-04-2011, 12:37 PM
True that...

harvester_sorrow
04-04-2011, 06:55 PM
I though your tire looked low. Time to get the other project down now.

crazybushcreature
04-04-2011, 07:13 PM
looks like a fun day even though the runner went bye bye

Animal
04-04-2011, 11:38 PM
I flopped it the first ten minutes out. Spilled my first beer and landed on norb as the chickies pile up in the back. [cheers] GUess I wasnt payin enough attention. Boobies2 Boobies2

Griswold
04-05-2011, 07:25 AM
I flopped it the first ten minutes out. Spilled my first beer and landed on norb as the chickies pile up in the back. [cheers] GUess I wasnt payin enough attention. Boobies2 Boobies2

Too much showin off to the ladies in the back....lol

4skin
04-07-2011, 06:59 PM
so found out what blew
was the intake gasket
filled a cylander full of coolant thats why it wouldnt turn over
guess i could fix it for more beatings
or just spend time on new build what to do mmmmmmmmmmmmmmm

Griswold
04-07-2011, 11:25 PM
so found out what blew
was the intake gasket
filled a cylander full of coolant thats why it wouldnt turn over
guess i could fix it for more beatings
or just spend time on new build what to do mmmmmmmmmmmmmmm

New build.......Can I Help......[cheers]

C-Dog
04-08-2011, 07:52 AM
so found out what blew
was the intake gasket
filled a cylander full of coolant thats why it wouldnt turn over
guess i could fix it for more beatings
or just spend time on new build what to do mmmmmmmmmmmmmmm



Strip er down and get the Willys rocking that time of year is hear. I bet if you spend a couple weeks on er u could have it done.....and like Clark said

Can I help if so let me know

Griswold
04-08-2011, 08:17 AM
Strip er down and get the Willys rocking that time of year is hear. I bet if you spend a couple weeks on er u could have it done.....and like Clark said

Can I help if so let me know

Ha that's 2.....come on Bruce let's Git-R-Doneoh yeah[cheers]

Honky
04-08-2011, 09:08 AM
I think you are going to miss the beating you give this truck....I'd say fix it up and beat it some more.

85chevy
04-08-2011, 05:18 PM
I vote get the new one done then look at fixing the runner for a beating later[cheers]

DIRTDIGGLER
04-08-2011, 05:57 PM
Im with Honky on this one you need one for the tight trails first and then go for the show :confused0006:

MOOSEHUNTER
04-08-2011, 06:01 PM
quick easy fix for weekends. new build for week nights