PDA

View Full Version : e-locker


Punk in Drublic
03-04-2011, 12:25 AM
buddys lookin to put an e locker in 91 4runner rear. he wsa askin about whats gotta be done machining wise, etc. my lockers have allways been a la miller, but i thought i ask here see if anyone has any pointers.

dirka dave
03-04-2011, 05:15 AM
Its an easy job, you just need to carve out a bit of one side of the housing to fit the actuator.

arjan
03-04-2011, 06:36 AM
Here is a write up:
http://www.4x4wire.com/toyota/tech/electric_locker/

Griswold
03-04-2011, 07:09 AM
And here's the wiring diagram
http://forum.ih8mud.com/79-95-toyota-truck-tech/204094-elocker-wiring-switches.html#post3020016diagram

youngun
03-04-2011, 11:41 AM
Going to be doing it to mine in the next few months, looks pretty easy to me

Griswold
03-04-2011, 12:55 PM
Going to be doing it to mine in the next few months, looks pretty easy to me

So you got that housing from bc4x4 eh....
Ya I have to wire mine up in a week or three[cheers]

youngun
03-04-2011, 03:44 PM
Didn't get an housing, might be getting a 96 4runner that was rolled for the 3.4 swap and e locker for the daily driver. I'm just going to cut and mod my original housing

Griswold
03-04-2011, 05:16 PM
Cool that works too....That's what I'm doing too.
I bought a 98 rear axle with it in it but 4.30 gears
but I got the relays and switch with it too all for 500.00
I kept the third with the relays and switch and gave the rest to my buddy.

youngun
03-04-2011, 05:40 PM
sweet, thats a pretty good deal :party0010:

Punk in Drublic
03-04-2011, 07:15 PM
right on guys, thanx for the info. ill pass it on.

RCCruiser
03-04-2011, 09:53 PM
It's quite simple. I've done it. It's a bit more involved for front install...