PDA

View Full Version : Where to get axle shafts resplined/narrowed locally? (Surrey/Langley)


andrewmacc
02-22-2011, 06:40 AM
Looking for places to get axleshafts narrowed (and obviously subsequently resplined) around Surrey or Langley? I'm right on the Surrey/Langley border in Cloverdale, and am stripping down some axles and intend to narrow them by probably around 5" total.

Anybody?
Off the top of my head I can only think of places like Pat's Driveline/Gears & Rears but I'm hoping somebody may know somewhere else as well?

TIA. [36]

homeboy
02-22-2011, 04:34 PM
try RND customs in Langley use to be OTT till they bought OTT out.

http://www.rndcustoms.ca/services.html

m j
02-22-2011, 07:46 PM
what axle?
Yukon has cut to length stuff for common ones

andrewmacc
02-22-2011, 10:39 PM
try RND customs in Langley use to be OTT till they bought OTT out.

http://www.rndcustoms.ca/services.html

Yeah they want $150 per shaft. Seems excessive.

I'm trying to get some Dana 60 and Dana 70 shafts shortened, I want to get it down to around 64" WMS total down from its natural 69".

4skin
02-22-2011, 10:49 PM
look at your shafts alot of 60 shafts are smaller diameter past the splines therefore cant be resplined
good luck

tchevy
02-22-2011, 11:25 PM
150 is not bad i would think

youngun
02-22-2011, 11:41 PM
There is a guy in chilliwack that can do them, forget the name of the shop. Someone should know on here, should be cheaper then 150 a shaft

FU Toolbag
02-23-2011, 05:53 AM
Yeah they want $150 per shaft. Seems excessive.

I'm trying to get some Dana 60 and Dana 70 shafts shortened, I want to get it down to around 64" WMS total down from its natural 69".

There's enough d 60's out there, there should be a factory combo that would shorten it up for you.