PDA

View Full Version : spring mounts


mus-Tard
10-08-2010, 05:48 PM
well the front mounts for my rear springs are shot and the bolt holes are quite elongated. so l was wondering where the best place to pick up a pair would be? the chump price from lordco was $120 a side. l know that we can do better than that.

any ideas:dontknow:

4skin
10-08-2010, 05:50 PM
ford dealership

mus-Tard
10-08-2010, 06:07 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs773.snc4/67370_10150277384715621_741360620_15201319_6872528 _n.jpg (http://www.facebook.com/photo.php?pid=12075181&id=741360620)

mus-Tard
10-08-2010, 06:08 PM
kinda want that fixed before l toss about 2000lbs of scrap in it.

Troy
10-08-2010, 06:23 PM
that will be fine for the scrap. take scrap to the yard, then get money and buy new hangers?

nice job on that though

fordfarm
10-08-2010, 08:19 PM
remove bolt put it back in with washers then weld washers to bracket. its cheaper & easier

Troy
10-08-2010, 08:36 PM
remove bolt put it back in with washers then weld washers to bracket. its cheaper & easier if your a hindu

fixed

mus-Tard
10-09-2010, 12:50 AM
dude its a pick up truck. not a dump truck

4skin
10-09-2010, 02:48 AM
pulling tank is pia not to mention grinding rivets off drilling holes out to 1/2inch because holes are a weird size
bolts dont fit tite

Always broke
10-09-2010, 09:37 AM
If they work for you I have a set on that chassis with the M motor ?

mus-Tard
10-09-2010, 01:21 PM
sounds good. and when can l come get that distributor?

fullsizebronco
10-09-2010, 03:09 PM
im looking for a set as well so far have only found a set of used ones for 60$

mus-Tard
10-10-2010, 12:12 PM
it seems to be a common problem

fullsizebronco
10-10-2010, 03:22 PM
i just need a set for my shackle flip ;)