PDA

View Full Version : Peg's 4runner.


dirka dave
09-22-2010, 09:32 AM
So I get a call from Chris a while back, need a cluch done in my 4runner.


Its a nice truck, Redline sold it to him.

It is an 85 solid axle, 22re, Detroit rear and 63" chev leafs.


I think we'll call it "The Red Retard".:D


Its also the first "job" for my new shop.....which is open for business....


132992 The neibours are used to tow trucks at my place now.[36]

132993

132994

132995 Perfect fit !...Love my new driveway !!

132996

132997

132998 Rare TOYOTA artifact... :cool:

132999Always disconnect the Batt first. :D

133000

133001

133002 Saftey first.

133003

133004

133005Supporting the rear of the engine

133006

133007

133008

133009

133010

133011

133012

133013

133014

133015I think there is suposed to be some material on there..:confused0006:

133016

133017 Coffee break !

133018My boys love playing with my jacks.

133019

133020 Flywheel cleaned up, fork cleaned

133021 Dynapack kit....

85chevy
09-22-2010, 10:01 AM
Someone got there moneys worth out of that clutch....

dirka dave
09-22-2010, 10:18 AM
Yep, it was a Centreforce too...

The weights were all gouged also....:confused0006:

Murd0c
09-22-2010, 10:32 AM
you u want to do a timing belt and water pump next?

epic3
09-22-2010, 11:22 AM
you u want to do a timing belt and water pump next?

it uses a timing chain

Murd0c
09-22-2010, 12:49 PM
it uses a timing chain

that's weird when I had it inspected at Toyota they told me I should replace the timing belt [wako]

dirka dave
09-22-2010, 12:59 PM
you u want to do a timing belt and water pump next?


Sure thing.....

dirka dave
09-22-2010, 01:17 PM
Next step, clutch..


133022 Old pilot bearing.

133023 made a bearing remover tool...

133024 nice eh ?

133025Nothing but the best.....

133026

133027Don't worry, I wiped off the extra grease.

133028Old jedi mechanic trick.

133029Fill and tap...

133030I love the power of hydrolics !

133031:D

133032 New bearing in.

133033Yes that is a torque wrench....:p

133034

133035

133036Looks all lined up.

133037

133038Drive shafts prepped.

Murd0c
09-22-2010, 01:23 PM
I must say thats some nice work

Apathy
09-22-2010, 01:51 PM
your alignment aint worth a shit.. gonna be fun getting that tranny in.

just saying

dirka dave
09-22-2010, 01:58 PM
your alignment aint worth a shit.. gonna be fun getting that tranny in.

just saying


It looks out from the picture, but when you look straight at it its bang on.


just sayin'

Apathy
09-22-2010, 02:01 PM
It looks out from the picture, but when you look straight at it its bang on.


just sayin'

cool.. because i've had one of those oops before...and it sucks to have to pull the tranny back out.[cheers]

dirka dave
09-22-2010, 02:02 PM
Espcially when you are doing a rig with a dual clutch.

hoser
09-22-2010, 05:10 PM
could i get some more pics please im not sure what your up to:dontknow:

Jayota
09-22-2010, 05:58 PM
cool.. because i've had one of those oops before...and it sucks to have to pull the tranny back out.[cheers]


almost sucks as bad as forgetting your alignment tool and wondering why the trans wont slide back in :D

Pegleg
09-22-2010, 07:51 PM
sweet ill have a clutch!!!!!!!wish i was down there too help

Apathy
09-22-2010, 07:51 PM
you can do it without the alignment too, but you better be damn good.

I can do it.. lol

Ironman
09-22-2010, 09:00 PM
you can do it without the alignment too, but you better be damn good.

I can do it.. lol

so you've got the tool i take it

dirka dave
09-23-2010, 09:50 AM
you can do it without the alignment too, but you better be damn good.

I can do it.. lol


So can I........[36]

dirka dave
09-23-2010, 11:28 AM
Thanks for the help Johnny....


Its nice to have help when you need it.


133052

133053

133054 What the hell you doing back there ?? :eek:

133055

133056 No you hang up..... no you hang up.


:fire

Apathy
09-23-2010, 11:35 AM
you can do it by checking the the distance around the friction disk to the pressure plate.
but again. . you better know what your doing. i wouldnt tell a novice to do it this way.

Tinker
09-23-2010, 03:36 PM
R u finished yet? Maybe a little less time being a shutterbug and you might get er done quicker!:D You on holidays or sumting?

SHITTY
09-23-2010, 03:37 PM
nice work . you must be lovin the new shop.

Hello Kitty
09-23-2010, 03:54 PM
nice pics. how big is your memory card?

dirka dave
09-23-2010, 06:58 PM
nice work . you must be lovin the new shop.


Yes I am.:D

4skin
09-23-2010, 07:25 PM
peggys gona beat it like a red headed stepchildlol

Pegleg
09-23-2010, 11:16 PM
you fukin bet i am!!!!!!!!!LOL

dirka dave
09-24-2010, 05:20 PM
133111 Salute !!

133112

133113

Happy birthday Tubby !!

Candiass
09-25-2010, 08:25 AM
man I'm gonna miss that truck...can't wait to see you bag it chris LOL....

redline
09-25-2010, 10:21 AM
Someone got there moneys worth out of that clutch....


about five years of good times,

why dynapak? will it stand up to nez's abuse?

dirka dave
09-26-2010, 09:31 PM
And Mint...[36] [36]


Stave testing.....?????:confused0006:

dirka dave
09-27-2010, 06:06 PM
Quick bumper fix.

133282 The Forman...

133283What a good little machine.

133284 Old and broken brackets.

133285

133286

133287

133288

133289

133290

133291 Beer can end cap.:party0010:

133292Ready for a beating !!

BrokenToy
09-27-2010, 10:03 PM
you still an idiot [15] nice pics

youngun
09-28-2010, 10:25 AM
Shop looks good, nice work.

Wifey doesn't look to inpressed in that picture.