View Full Version : yj nutter no spark
07-10-2010, 11:21 AM
someone has to have had this problem...i did the motorcraft 2100 swap on the yj,did the nutter bypass,ran fine for 2 weeks,parked it now i got no spark at all when cranking,i replaced the coil,ignition module and the distributor,i get one spark when you let off the key out of the coil wire,any one got some ideas???:confused0006: :confused0006:
07-10-2010, 11:33 AM
Sounds like you got a short in a wire. Maybe a fuseible link. Try following the wires you just cut for the nutter. Maybe your ecu. :dontknow:
07-10-2010, 08:46 PM
2 most common problems for your symptoms, check and make sure you have power and a good connection for the switched power to the coil and ign module and/or replace the ign module again. I used to have at least 3 of those ign modules in my jeep at all times when it had AMC power with the Ford ignition.
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.