PDA

View Full Version : Ideas needed


harvester_sorrow
04-26-2010, 05:07 PM
The clutch sheave on my golf cart has worn through. $400 for a need one so need some ideas of cheap fixes. Keep in mind its aluminum and on the end of the crank shaft so balance comes into play. Let the ideas flow.

Here's the clutch and my first attempt. Lasted about an hour then sheet metal ripped.

Pudge
04-26-2010, 05:34 PM
?? maybe spend the 4 hundy?? Or will this just happen again?

Always broke
04-26-2010, 06:55 PM
Get a brake rotor and weld it on ???

Just sayin

Trooper
04-26-2010, 09:14 PM
Spin a new piece overtop and get it spot welded on. Why does it have to be aluminium? looks like your peices would work but your using anealed aluminium sheet. You will have to temper it and deburr your edges to keep it from cracking

4skin
04-27-2010, 01:47 AM
[36] beat a piece of 16 gage steel into cone counter sink rivets
and dont let rebel drive hehehe:D

bakelite
04-27-2010, 09:01 AM
Could you convert it to a snowmobile clutch set up? More parts availability and probably last longer. :dontknow:

Trooper
04-27-2010, 06:01 PM
You can also use a go cart clutch for home build offroad ones. Take a hell of a beating lock in low and are reliable.

mus-Tard
04-27-2010, 08:34 PM
[36] beat a piece of 16 gage steel into cone counter sink rivets
and dont let rebel drive hehehe:D


:mad: l am the greatest golf kart driver since......................






















ummmmm






















hmmmm



















you know what. ..
...
....
.....



























yeah maby.

mus-Tard
04-27-2010, 08:36 PM
thicker metal and more rivets

epic3
04-27-2010, 09:03 PM
burn it

Explorer guy418
04-27-2010, 10:10 PM
SLED MOTOR.




Solved.

4skin
04-27-2010, 10:56 PM
GSXR 1100 hell yea

Troy
04-27-2010, 11:35 PM
is that for a yamaha? i just tossed 2 clutches out and they were mint

i can probably get one for you. or let u know where u can get one

harvester_sorrow
04-28-2010, 06:14 PM
Some good ideas here.

Master P: don't want to spend that much money on this cart because it's so old who knows what will break next on it. I don't want it turning into a money pit. I got big red for that.

Always broke: Needs to be the proper angle so a brake rotor would not work.

I'll try thicker sheet metal with countersunk rivets. If that doesn't work aftermarket sound like the next best plan.

4skin
04-28-2010, 09:49 PM
juinior dragsters use that style of clutch but you dont wana buy one
400 bux no 2x ouch