PDA

View Full Version : Custom frabrication, over the last two months bumper sliders and more


jordanbennett
02-12-2010, 07:35 PM
hey guys was just through some photos, these are some of the bumpers and sliders my friend(the machine) on jeep club and i have made, nothing to crazy but thought you may like to check out some fresh pics, sorry i dont have more of making them. also have some photos of pokin at my toyota aswell.[cheers] http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts091.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts080.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts108.jpg

http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts184.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts134.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts121.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts120.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts114.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts123.jpg

http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts109.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts122.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts099.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts137.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts174.jpg
different bumper
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts172.jpg

http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts106.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts118.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts125.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts126.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts144.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts081.jpg we made a sort of carrier for the winch so he was able to remove it on and off.
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts118.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts085.jpg
rear bumper with tire carrier, also bottom of bumper is an air compressor.
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts141.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts147.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts152.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts170.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts094.jpg

http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts092.jpg
cherokee bumper
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts095.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts146.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts164.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts133.jpg
jeep slidershttp://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts139.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts140.jpg
cj scrambler(front was just a kit we put in rear is all custom)
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts145.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts135.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts130.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts124.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts119.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts103.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts182.jpg
jeep sliders
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts187.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts188.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts116.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts127.jpg
land cruiser rear bumper with tire carrier
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts193.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts199.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts173.jpg
snapped my shock hoop off while wheeling at sylvester so i cut them of and plated then frame
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts181.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts074.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts050.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts061.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts062.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts065.jpg
did both sides so hopefully it will be stronger, just have to weld in new shock hoops

i took my body lift out and had to cut my fenders i used a screw driver with chalk on the end and it worked perfect.[36]
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts043.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts032.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts031.jpg
http://i318.photobucket.com/albums/mm417/proskimjb/jordanstoyotaparts040.jpg


i will post more photos of things later, my eyes are killing me from staring at this thing! [cheers]

vajayjay
02-12-2010, 07:45 PM
Those are some nice bumpers and things

Good work man[cheers]

SuzukiSamurai
02-12-2010, 07:48 PM
So am I ever going to get the steel back that I gave him for my dads bumpers? Or the money for rearending me with my bike on my bike rack? I think it's like a total of $400 for the steel and the bike frame from warranty

yoda thrills
02-12-2010, 07:50 PM
wicked fab werk man, like the idea of the screwdriver chalk holder

theborges
02-12-2010, 08:12 PM
very nice work. like the bumper setups

jordanbennett
02-12-2010, 08:13 PM
So am I ever going to get the steel back that I gave him for my dads bumpers? Or the money for rearending me with my bike on my bike rack? I think it's like a total of $400 for the steel and the bike frame from warranty

well lee i dont know much about that, but what i can say was your first problem was buying a bike, wouldnt have happend if you rode a skateboard as for the metal why dont you ask him! :D and not me.

jordanbennett
02-12-2010, 08:14 PM
wicked fab werk man, like the idea of the screwdriver chalk holder

hahaha everyone throught it was a gay idea, but it took me like 20 mins to ddo both fenders, works for me[36]

jackedup
02-12-2010, 08:23 PM
well lee i dont know much about that, but what i can say was your first problem was buying a bike, wouldnt have happend if you rode a skateboard as for the metal why dont you ask him! :D and not me.

hahah

Happypants
02-12-2010, 08:27 PM
your buddy does wicked fab work, but really are you that worried about your licence plate? after all people see it everyday when you drive on the street,

just sayin.....

HILLBILLY
02-12-2010, 08:51 PM
very nice work, they look awesome

Tunabomber
02-12-2010, 09:39 PM
dam fine job :cool:

'Balmer
02-12-2010, 10:06 PM
wicked fab werk man, like the idea of the screwdriver chalk holder

Cheap (or free) Tools rock! It shows some ingenuity to come up with your own tool regarless of how "mickey mouse". Great fab work and well done on the fender tool.

Explorer guy418
02-12-2010, 10:30 PM
riiiiiight on buddy!

Troy
02-12-2010, 11:46 PM
nice work

that stinger is wack but the work is good

jordanbennett
02-13-2010, 02:39 AM
your buddy does wicked fab work, but really are you that worried about your licence plate? after all people see it everyday when you drive on the street,

just sayin.....

that guy we built that bumper for was a cop and wanted everything covered, it looks lame i know

jordanbennett
02-13-2010, 02:40 AM
thanks guys ill post more of shit ive made soon, thanks for the comments![cheers]

C-Dog
02-13-2010, 09:36 AM
Definatley some nice work donr there really liking the front bumper on the Red Cherokee what year is that thing u know

vajayjay
02-13-2010, 09:40 AM
That red thing is one of those commander things
The suburban of the jeep world:D

C-Dog
02-13-2010, 09:45 AM
That red thing is one of those commander things
The suburban of the jeep world:D


lol ya that what i meant couldnt think of the name of it [stoned] allready im liking the headlight i have seen them put into my body style XJ pretty easy

jordanbennett
02-13-2010, 09:50 AM
lol ya that what i meant couldnt think of the name of it [stoned] allready im liking the headlight i have seen them put into my body style XJ pretty easy

yeahh dood pretty sure its almost a brand spackin new commander, that would be a cool idea![36]

harvester_sorrow
02-13-2010, 11:55 AM
Some really nice fab work.

England
02-13-2010, 12:44 PM
Awesome !!!

bakelite
02-13-2010, 02:30 PM
Nice fab skills [36] I like the removable winch plate idea, good thinking there [cheers]



....post more pics so I can steal your ideas :cool:

jonny6door
02-13-2010, 08:38 PM
im going to remember what that jeep looks like so when i see it ill tell the guy i saw pictures of his license plate posted all over the internet.

longhorn
02-13-2010, 09:40 PM
im going to remember what that jeep looks like so when i see it ill tell the guy i saw pictures of his license plate posted all over the internet.

What you should be doing is going over to the FTE site and defending your fab skills.
I stuck up for you for awhile but they outnumbered me.
http://www.ford-trucks.com/forums/929712-seats-nine.html

lincoln locked
02-21-2010, 10:39 AM
looks good exept I think I would guset the shock hoops and mayby I would have fish mouthed the plate you put on your frame, bumpers and such looks great

thrillbilly
02-21-2010, 12:35 PM
so jordan when ya gonna do my bumper! :P

jordanbennett
02-23-2010, 10:24 AM
so jordan when ya gonna do my bumper! :P

sorry joe, we got booted out of the shop we were at, friends girlfriend (where the shop was) turned into psycho hose beast! but we could do it soon im working at my buddies shop in langley now, let me know, goes for eveyone eles aswell who needs fabrication done[36]

skyjacker
02-23-2010, 10:05 PM
awsome metal work man [36]

LooseNuts
03-01-2010, 08:44 PM
i wish i had fabing skills like you.