View Full Version : pitman arm?
12-22-2009, 10:48 PM
what pitman arm are you guys using on 2wd chev box for x over steering
lifted ford fullsize bronco pitman arm or f150
12-22-2009, 11:05 PM
i only need 2" drop max do you know what stock drop is on that arm
I usually just have the nearly flat stock ford one or the 4" drop to mock it up
the less drop you can use the better as it seems a bit easier on the frame
I dont have time right now to look for it, as I have to go to work, but there is a pdf file from ?skyjacker? that has a ton of them listed
IMO you need a reference point to really get it right so start with the stock ford from a 78/9 ish bronco
the 2wdr box uses a very common spline so a walk through the wreckers might turn up a jeep or astro van pitman that will work for you, just try and keep the length the same or longer then the ford one so you dont lose any steering angle with common steering arms
vBulletin® v3.6.4, Copyright ©2000-2018, Jelsoft Enterprises Ltd.