View Full Version : Dodge hubs for gm Dana 60
10-08-2009, 11:54 AM
Will dodge ram Dana 60 hub and rotors work on a gm Dana 60 to convert to single wheel from dually?
10-08-2009, 12:39 PM
is it an older d60? if so then they should
10-08-2009, 01:41 PM
when did GM use d60's for their rears?
10-08-2009, 03:07 PM
yes all that stuff is the same, the only thing that is deferent is the lenght of the inside axels.
10-08-2009, 03:33 PM
Ok so I would have to change my shafts?
10-16-2009, 11:19 AM
???? If I have tonchange them how much shorter ?
10-16-2009, 12:32 PM
i have extra rear full floater shafts
10-16-2009, 12:42 PM
Just about everything you need to know, scroll down to Converting DRW hubs to SRW hubs: ...
"The SRW and DRW front axles are identical EXCEPT for the wheel hub and rotor - same spindle, bearings, and lockout."
Hope this helps. [cheers]
10-16-2009, 02:19 PM
Yeah I can't fin the lengths of the shafts that they need to be ? Fucking from single wheel hub and rotors are almost as expensive anyway god damned hard to find a few place have the proper srw hubs but none in stock and or on permanent back order
10-17-2009, 08:05 AM
This should help...http://www.pirate4x4.com/tech/billavista/60_front/D60%20Front%20Shafts_files/sheet002.html
I swapped DRW front hubs for SRW hubs with a guy from Pirate, just paid shipping one way. Maybe post there and elsewhere. I don't think the shaft lengths are different but I've been wrong before and I gather you are referring to the front D60? [cheers]
10-17-2009, 10:57 AM
Cool thanks I'll have to check serial number on it I know they came out of a crew cab heavy duty full size 84 thought they were front and rear 60's but found a " 70hd" stamped into the rear yesterday when prepping for paint Nd the front sure is a 60 but assuming the stamp means a dana 70 for the rear? Looks like either way all the hubs and rotors are the same now the other question the hubs are different internal and external ?? So do they work or no?
10-17-2009, 01:27 PM
You shouldn't have to change axles shafts at all. The difference is in the distance between the diff and the c. If your using a shaft from the same axle that your changing to srw you won't be needing to changs. I did my ford awhile back and just popped the hubs and put them on the other axles. no problem.
10-17-2009, 05:09 PM
shafts and what not would be outta the drw chevy dually dana 60 and the hubs well could possibly be teh dodge of similar year IF they are just the same and cost less and are more abundant , couldnt find any SRW hubs for a good price but now I ahv efound a supplier inteh states for a real good price just have to sort the shipping out, but he has over 40 pairs...
10-25-2009, 05:38 PM
i have a set of chev dana 60 hubs if you are looking for some they interchange, and if you want to upgrade to 35 spline it is possible
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.