PDA

View Full Version : question for a buddy


thrillbilly
09-24-2009, 03:32 PM
he doesnt have fibc so hes askin...

is there any 88-99 chevy ext cab 5.7L thats standard or just the regular cabs. and if not what manual tranny can be used on the ext cab chevs.

:happy0045:

Tsunami
09-24-2009, 08:35 PM
There where a few extended cabs that came with manual trannies as far as what tranny to use is really up to you all you need for a swap would be the pedals and the hydraulic clutch setup any 88 to 98 setup will work and decide what tranny. The NV4500 5 speed is the heavy duty one ton expensive though. You could run the old sm465 easy to find fairly inexpensive. Lots of sites with info on different trannies

thrillbilly
09-25-2009, 02:59 PM
'any 88-98 setup will work'
tranny from a 305 5speed im assuming? not the 4.3?
yet to find a site for him but ill keep lookin thx

Tsunami
09-30-2009, 08:54 PM
The only thing to remember is there is a difference between 2wd and 4wd, the tranny from behind a 305 is usually an NV3500 half ton tranny depending on the use it's not a bad tranny. Just punch in NV 3500 or NV4500 on your computer and it will give you a ton of info. Hope that helps

thrillbilly
10-03-2009, 04:57 PM
thx budday will relay the info