PDA

View Full Version : jeep cherokee pickup buildup


Pages : [1] 2

Happypants
09-23-2009, 12:12 AM
this all basically started the week after the newbie run when i blew out my rear drivers side window, i figured it was time to start cutting and welding
pulled the rear hatch off first, fucking heavy too
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/5773_239670025031_623005031_8494129.jpg
then took out the pass side rear glass
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/5773_239670035031_623005031_8494131.jpg
some quick leveling and taping of where to cut,
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/5773_239670040031_623005031_8494132.jpg
say bye bye roof
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/finallook.jpg
started on the roof, getting this cut straight was critical and a pain in the ass
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/roofcut.jpg
snip snip
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/snipsnip.jpg
rear shot
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/snipsnip2.jpg
after a bit of cleaning and vaccuming out the interior it was off to darins house where the real fun started,
test fit the insides, fit beautifully,
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/startbox.jpg
b-pillar boxing tacked in place,
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5629.jpg
other side
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5631.jpg
time to start welding!happy penis
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5628.jpg
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1149.jpg
purdy welds
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1172.jpg
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1148.jpg
boxing to the floor
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1161.jpg
angled sections put in
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1196.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5630.jpg
another shot
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1165.jpg
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1152.jpg
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1169.jpg
upper roof section tacked in
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1185.jpg
why cutting the roof straight was so important, no trimming was needed at all [36]
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1187.jpg
another shot
http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1180.jpg
thats all so far, bunch of grinding was done tonight, darin still has some of the floor left to do and the tailgate then its on to half doors and beginning of the exo/cage, more pics soon
nick

Tunabomber
09-23-2009, 12:30 AM
lookin good nick


but what a waste of a good sticker :(

Happypants
09-23-2009, 12:33 AM
i know dude, i lost all my stickers that were on the rear hatch and such, wanna make me another, give ya 50 bucks for it!

D-Ass
09-23-2009, 12:59 AM
looks like shit[16]!! and the guy building it is a prick!!go fuck yourself












:D

Little Samurai
09-23-2009, 01:10 AM
Looking awesome Nick and Darin. Would it have killed ya to bang out some of the dents on that rear pass. panel first?:D Are you going to leave the cab open to the floor or box it in a bit? Keep the updates coming.

Happypants
09-23-2009, 08:33 AM
I tried to pound out the big dents behind the doors but there fucked. Had a 2x4 in there hitting it with a 20 pound sledge and it wasn't moving, the back will be getting a canvas top made 4 the rear

bakelite
09-23-2009, 08:51 AM
Looks great mang [36] [36] [36]

bcmaxx
09-23-2009, 09:16 AM
Looks awesome!! Will just boxing in in give it enough strength? Have heard a few xj chop stories where they have alot of flex and twist after. I wish i had a two door!

Momma Taz
09-23-2009, 09:21 AM
Can't wait to see the finished product.

Happypants
09-23-2009, 09:25 AM
Looks awesome!! Will just boxing in in give it enough strength? Have heard a few xj chop stories where they have alot of flex and twist after. I wish i had a two door!

essentially yes it will give it alot more strength in the rear cause everything is being tied to itself and then into the floor plus the exo cage will stiffin it up lots, also going to tub the rear wheel wells out once were done everything so i can fit a 40+ size tire in it without slashing up my rear tires while flexing

BuckNaked
09-23-2009, 10:08 AM
fuckin rights buddy lookin good!
________
Jz engine (http://www.toyota-wiki.com/wiki/Toyota_JZ_engine)

C-Dog
09-23-2009, 10:17 AM
Looks good man i have allways wanted to do that to an XJ one day when it is a trailer truck i will do my 4 door like that [36] [36] [36] [36]

Zibi
09-23-2009, 11:36 AM
I've never seen a 2 door chop, looks killer

curious though, why didn't you just redo the entire fenders...cost? the stock ones look pretty fucked

Happypants
09-23-2009, 11:40 AM
they are fucked up really bad, there were some ideas floating around about what to do with the back but cost is one thing,. plus i dont it to take me all winter either to do, still gotta finish the floor up, tailgate, half doors, tub the rear wheel wells, more than likely are just gonna leave it, they were pivot points for the trees,

dirka dave
09-23-2009, 03:32 PM
Looking good so far...


Nice MTR's !!

hilltoptoy
09-23-2009, 05:19 PM
Sweet , Jeep trucks are cool .

90toy
09-23-2009, 09:26 PM
nice job... you mig welding without gas?

flux core sux haha but good work

D-Ass
09-24-2009, 12:13 AM
nice job... you mig welding without gas?

flux core sux haha but good work



your a retard [16] you are a ware cherokees where built with galvanized sheet metal and this is 1/8 being welded to 20ga right




just sayin[f]

Happypants
09-24-2009, 07:37 AM
fuckin rookies...jeeze, i tell ya, sometimes....

J20
09-24-2009, 10:04 AM
[36] [36] [36]

regulate34
09-24-2009, 06:07 PM
looking good man
i really wanna see the cage

D-Ass
09-24-2009, 06:39 PM
looking good man
i really wanna see the cage


why want one on your ford or just around the bottom :D

Happypants
09-24-2009, 06:40 PM
gonna do a exo cage instead of a interior cage,

T.O.
09-24-2009, 06:46 PM
needs a body lift.[22]

D-Ass
09-24-2009, 09:43 PM
needs a body lift.[22]

have you got your lawn ornament running yet :D??????

D-Ass
09-24-2009, 10:17 PM
here is some more

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1205.jpg



http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1204.jpg

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1202.jpg

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1200.jpg

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1199.jpg





just for starters :D

MuddyWheeler
09-24-2009, 10:25 PM
Lookin Good!!!

Moondog
09-24-2009, 10:31 PM
your a retard [16] you are a ware cherokees where built with galvanized sheet metal and this is 1/8 being welded to 20ga right




just sayin[f]

Keep up the good work youngster you ain't doing to bad for an amateur :D

D-Ass
09-24-2009, 10:37 PM
Keep up the good work youngster you ain't doing to bad for an amateur :D

hay moondog!!!

[d]

just sayin:D

Moondog
09-24-2009, 10:42 PM
hay moondog!!!

[d]

just sayin:D

:o [35] Just Saying

C-Dog
09-24-2009, 10:46 PM
hay moondog!!!

[d]

just sayin:D


All he said was nice work not lets go for a date lol

:o [35] Just Saying


Geesch i knew we were going to have to watch out for this guy lol

Tunabomber
09-24-2009, 10:46 PM
get a room eh [16]

MikeWild
09-24-2009, 10:46 PM
seems like a lot of wasted space on the boxed sides. You plan on having any compartments, or just leave it boxed?

Trailjunkie
09-24-2009, 10:50 PM
looookin good nick im jelous big time cant wait to see the soft top in place.

Moondog
09-24-2009, 10:56 PM
get a room eh [16]

Sorry Eric [35]

D-Ass
09-24-2009, 10:57 PM
All he said was nice work not lets go for a date lol




Geesch i knew we were going to have to watch out for this guy lol


hay it's moondog I never know what he is really saying:D


MikeWild seems like a lot of wasted space on the boxed sides. You plan on having any compartments, or just leave it boxed?

going to tub out the wheel wells then see what kind of room is left over and the back is going to have the same profile as the sides it is NOT going to look the way it does right now also going to build a 50/50 split tail gate for it as well.

keep looking their is a lot more to come [cheers]

C-Dog
09-24-2009, 11:20 PM
[quote=bcredxj;1448517]hay it's moondog I never know what he is really saying:D


Okay Okay your right we never do really know what he is saying do we[f]


:D

Trailjunkie
09-24-2009, 11:27 PM
darren you should build me some 007 shit to. hhhhmmm missle launchers man

D-Ass
09-24-2009, 11:32 PM
darren you should build me some 007 shit to. hhhhmmm missle launchers man

I would but my contact in Iraque has gone missing so the missiles may be a problem:confused0006:

Moondog
09-24-2009, 11:39 PM
I would but my contact in Iraque has gone missing so the missiles may be a problem:confused0006:

Where is Iraque? the Irish pool league [f]

TWOZEROFOUR
09-25-2009, 12:15 AM
pretty sick build man [36]

D-Ass
09-25-2009, 12:15 AM
Where is Iraque? the Irish pool league [f]

I got nothing:dontknow:

thrillbilly
09-25-2009, 02:22 AM
why didnt u just buy a comanche? :p

D-Ass
09-25-2009, 02:39 AM
why didnt u just buy a comanche? :p


why havn't u bought a truck that can wheel???:D

Candy
09-25-2009, 02:47 AM
why didnt u just buy a comanche? :p

now how is that supposed to be fun???
perfectly good cherokee, beef it up, drive it till you wreck it then tube it... sounds wayyy more exciting then just buying it:dontknow: just saying

Candy
09-25-2009, 02:58 AM
oh yeah the XJT looks fackin sexy beefy

dirka dave
09-25-2009, 03:13 AM
Are you done yet ?

A6D9
09-25-2009, 05:45 AM
i think the straigh edges and squareness add to the mean look.

great job guys. :D

UU
09-25-2009, 10:14 AM
looks gooder


just sayin' :dontknow:

zackman
09-25-2009, 10:58 AM
looks wicked

lornix
09-25-2009, 11:41 AM
Nice work so far. Looking forward to seeing more of the build [36]

D-Ass
09-25-2009, 06:53 PM
Are you done yet ?


is your back yard ???? :D

bezzz
09-26-2009, 12:21 AM
Lookin Good Nick,can't wait to see the finnished product on the trail[36] .PS Happy B-Day tomorrow[cheers]

Happypants
09-26-2009, 12:25 AM
Lookin Good Nick,can't wait to see the finnished product on the trail[36] .PS Happy B-Day tomorrow[cheers]

thanks but my b-day was wensday just the party is this weekend,

bezzz
09-26-2009, 10:35 PM
MY BAD,have a drink on me tonight then!!!!!!!!!!!!!!!!!!

thrillbilly
09-27-2009, 10:46 AM
why havn't u bought a truck that can wheel???:D

zzzzzzzzzing!
i got somethin cookin up... dont u worry :hitler:

vajayjay
09-27-2009, 10:45 PM
Is it done yet[f]

Happypants
09-30-2009, 11:24 PM
darin got the rear tailgate section bent up at work today so here are some pics,

tailgate tack welded in place, also bent up to follow the "body lines" haha
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5784.jpg
little bit of this and that
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5785.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5786.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5787.jpg
tounge it baby
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5788.jpg
brysons awesome artistic skills
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5789.jpg
side mount also profiled to follow "body lines"
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5790.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5791.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5792.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5794.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5795.jpg
pretty
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5796.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5797.jpg

its coming along nicely, more pics soon, thanks darin
nickhappy penis

Chopstick
09-30-2009, 11:28 PM
wow darin you really do look like a crazy monkey

Moondog
09-30-2009, 11:38 PM
It's looking good [36] You thought of a color for it yet?

B
10-01-2009, 12:00 AM
it not gonna work needs more triangulation[f]

C-Dog
10-01-2009, 10:43 AM
Nice work Darin i like how you bent it up like that to follow the lines of the XJ.....It going to be a pretty cool rig when it's all dialed in fer sure

Happypants
10-01-2009, 04:32 PM
It's looking good [36] You thought of a color for it yet?

dunno yet, was thinking of doing the truck forest camo and then a solid color for the cage, black or something, i dunno, its still up in the air

D-Ass
10-01-2009, 07:43 PM
I still say that guy is a fucken retard go fuck yourself

Candy
10-01-2009, 08:27 PM
thats looking pretty wicked... awesome work darin

J20
10-01-2009, 09:25 PM
looking good boyz.............[cheers]

Trailjunkie
10-02-2009, 12:53 AM
[QUOTE][I still say that guy is a fucken retard /QUOTE]
dude this is funinbc, youl have to be more specific,

D-Ass
10-02-2009, 01:07 AM
[quote][I still say that guy is a fucken retard /QUOTE]
dude this is funinbc, youl have to be more specific,

sorry here you go
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5791.jpg

fuck who let that fuck tard on here?????:D

Little Samurai
10-02-2009, 01:08 AM
nice job... you mig welding without gas?

flux core sux haha but good work

I thought you meant this guy;)

D-Ass
10-02-2009, 01:21 AM
I thought you meant this guy;)

him too just a little more though:D

nbrowser
10-03-2009, 07:41 PM
Just curious since I know a XJ is unit body, are you two going to have to reinforce the floor of it to lessen body twist ? Just thinking with the roof gone the "box" now has an opening in it.

Evan the Blue
10-03-2009, 09:03 PM
Great work boyz [5] ... can't wait to see you out on the trails w/ it Nick

Happypants
10-03-2009, 11:24 PM
Just curious since I know a XJ is unit body, are you two going to have to reinforce the floor of it to lessen body twist ? Just thinking with the roof gone the "box" now has an opening in it.

New floor is getting put in, so yes,

Candy
10-04-2009, 01:22 AM
jeep guys are pretty smart ... well in some areas haha :P

Spedley
10-04-2009, 10:01 AM
Nice work on the profile... I was wondering if you were gonna leave the back all square, but now that you have added the pieces to the edges, totally changes the look. Looks soooooo much more finished. Good work Boys!

D-Ass
10-04-2009, 08:24 PM
well didn't get to go out and play had to work on nicks shithappy penis

"fucken slave driver"go fuck yourself

finished the profile on one side and got the top panned on the other (and yes it dos follow the dent hahaha)

http://i40.photobucket.com/albums/e241/bangmax/IMG_5799.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5807.jpg

then I turned my attention to the tail gate cut in the latch and the hinges




time to start on the gate itself cut the tacks holding it in place and fit the inside pan



from the side ( now that is a big hole)

http://i40.photobucket.com/albums/e241/bangmax/IMG_5802.jpg

did a little cut here and a chop their

http://i40.photobucket.com/albums/e241/bangmax/IMG_5819.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5817.jpg

then boxed the sides and welded them up

http://i40.photobucket.com/albums/e241/bangmax/IMG_5810.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5820.jpg

open close open close "YAY"


and don for tonight



http://i40.photobucket.com/albums/e241/bangmax/IMG_5813.jpg

Happypants
10-04-2009, 08:31 PM
awesome work mang, of course im a slave driver, fuck i do concrete work, nuff said, :D

looks wicked d00d! still want me to go to P.A and get some tailgate straps or no?

D-Ass
10-04-2009, 09:09 PM
awesome work mang, of course im a slave driver, fuck i do concrete work, nuff said, :D

looks wicked d00d! still want me to go to P.A and get some tailgate straps or no?


yep and I will get you a length :D

Happypants
10-04-2009, 09:10 PM
yep and I will get you a length :D


coo mang, i think you shoulda wrote on my jeep that energy drinks help you build, not ICP loloh yeah

D-Ass
10-04-2009, 09:38 PM
ok then here you go

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1183.jpg

:D

C-Dog
10-05-2009, 10:07 PM
Really nice job on the gate Darin looks bad ass fer sure [36] [36]

Trailjunkie
10-05-2009, 11:44 PM
wow darin freakin nice work man. cant wait to see nick put the first new dent into it. gonna be sweet!

BAM
10-06-2009, 12:06 AM
awesome work! love that it's different

Happypants
10-06-2009, 06:42 PM
wow darin freakin nice work man. cant wait to see nick put the first new dent into it. gonna be sweet!
wont be able to, there will be a damn exo cage around all of it lol

awesome work! love that it's different

thanks man, its all darins work, im just paying for it and doing the grunt work after all the welding is done, wicked work indeed, i was trying to go for something different cause every tom,dick and harry has a lifted xj lol:D

Tinker
10-06-2009, 07:07 PM
Lookin' sweet dude! When does it hit the trails again?

tchevy
10-06-2009, 11:31 PM
Im not gonna lie.....looks sweet i like it[cheers]

Tunabomber
10-07-2009, 12:40 AM
ok then here you go

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1183.jpg

:D



on a side note rockstar are 2 for one at 7-11 this month[36]

D-Ass
10-07-2009, 12:54 AM
on a side note rockstar are 2 for one at 7-11 this month[36]

ya I know but I am not a rockstar only amped to get it done [36]

(fuck that was a bad pun!)

Candy
10-07-2009, 08:20 PM
i honestly can't wait till its done... i think im starting to get seperation anxiety from the jeep... wow thats bad lol

Happypants
10-11-2009, 11:27 PM
just a few for tonight, went over and had a gander at a few things, played with the tailgate, looked at some lights,

hmmm which ones for side markers:confused:
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/lights.jpg

darin started on the half doors,
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/halfdoors.jpg

and just a random pic of the front cause i miss my jeep [cheers]
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/front.jpg

Trailjunkie
10-11-2009, 11:49 PM
that heeps sticker is the coolest mod yet mang.

Happypants
10-11-2009, 11:51 PM
lol thanks but i want that new one, that looks sweet, and the jeeps almost done, just gotta do a bunch of grinding and finish welding in a few things, then the exo will be next,

Trailjunkie
10-11-2009, 11:54 PM
done man

bocephusjr
10-12-2009, 01:06 AM
ok then here you go

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_1183.jpg

:D
you need to seriously think about clipping ur nails back my dogg has shorter nails

Happypants
10-12-2009, 09:28 AM
do you seriously have nothing fucking better to do? piss off you fucking idiot

dirka dave
10-12-2009, 10:48 AM
Done yet ??

nbrowser
10-12-2009, 01:06 PM
I seriously can't wait to see this project when it's finished, looks like a lot of attention to detail has gone into the metal work....good job bcredxj and NoNeckNick....

Trailjunkie
10-12-2009, 01:27 PM
so when's the stripper pole goin in?

theborges
10-12-2009, 03:16 PM
looking really good nick.

Happypants
10-12-2009, 05:29 PM
so when's the stripper pole goin in?

haha ill work something out :D

D-Ass
10-12-2009, 10:40 PM
well here we go again this time he made me work thanks giving day [whip][whip]

just took pix at the end nothing while it was being done

http://i40.photobucket.com/albums/e241/bangmax/IMG_5839.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5850.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5849.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5848.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5847.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5840.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5843.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5851.jpg

http://i40.photobucket.com/albums/e241/bangmax/IMG_5844.jpg

I think I am going to re skin the door panels as the factory shit just don't look right to me and may be pad the sill just for some extra comfort

the doors will be getting electric poppers so the handle oles will be filled

now to finish off this one and start on the drives door

:D

Happypants
10-12-2009, 10:51 PM
sweet looking mang, glad i didnt have to come over there with my whip and get your butt in gear :D j/k

buck
10-12-2009, 10:54 PM
lookin great! nice work

A6D9
10-13-2009, 06:23 AM
forgot the beer holder in that nice big flat panel on the door, cut a small hole bout same size as your fav bottle and put a false bottom in it ;)

Tunabomber
10-13-2009, 09:07 AM
looking good guys

just make sure ya dont paint it beige or somethin



oh and stop hogging darrin [cheers]

dirka dave
10-13-2009, 01:27 PM
Should have just bought a Toyota.:party0010:



[15] [f] [1e]

EIEIO
10-13-2009, 04:35 PM
Looks great Nick! But no beer holders in the half doors, like dubya, teee, effff!!

Happypants
10-13-2009, 04:57 PM
looking good guys

just make sure ya dont paint it beige or somethin



oh and stop hogging darrin [cheers]



no hes mine!!! its bad enuff jen and i have to share already, lol and i do have beer holders already but somewhere else, where i perfer them, on my center console :D

Candy
10-13-2009, 09:12 PM
the half doors are looking pretty sexy :P

Happypants
10-13-2009, 11:36 PM
Did a bunch of grinding tonight at darins, about 90% of the grinding is done so far, tailgate is pretty much done, chopped some more sheet metal off behind the rear tires, just gotta box in the rear quarters, put in the new rear floor, seats, drivers side half door, lighting/wireing the rear lights/signals/backup lights then we'll be onto the rear cage/exo and front bumper, jeeps coming along beautifully, getting excited!! Almost done!!!!! Will post pics tommorow after work as I'm dead tired!!

Chopstick
10-14-2009, 12:15 AM
it looks weird but i cant wait till its done... the exo cage will look sexy on that thing

Trailjunkie
10-14-2009, 01:15 AM
exo?? well comon now.....lets see it dammit!

Happypants
10-14-2009, 09:03 PM
exo hasnt started yet, still gotta do the floor and lighting/wiring stuff exo is last, you will all see it soon, hopefully toy run :D

UU
10-14-2009, 09:52 PM
drama

Happypants
10-14-2009, 10:19 PM
got almost all the grinding done yesterday, got the rear quater bottom cut out and semi ready for new steel, a few pics from yesterday
http://i918.photobucket.com/albums/ad21/nicksxj/snother.jpg
all cleaned up
http://i918.photobucket.com/albums/ad21/nicksxj/clean.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/cut.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/done.jpg

all thats left is, floor,drivers side rear quarter,drivers side half door, wireing and lighting
nick

FU Toolbag
10-18-2009, 07:11 PM
I've seen this thread for a while and really like what your doing.

As probably expected though, I do have one little problem, not with the build but with where you've posted it, and it's not directed to you as it is to the mods. There is nothing but jeep here. Yes it's fabrication and yes it's cool, but still all jeep. My 350 build thread was here and got kicked to the ford section cause it was a ford. It's got a cummins motor and mostly dodge drivetrain as well as many other parts from many other vehicles and a ton of custom fabricated parts too put it all together. I really don't care, but it's been bugging me a bit, so what the hell. Figured I'ld stick a foot in my mouth before I forget what toejam tastes like.

Happypants
10-18-2009, 09:42 PM
thanks for the comments, uhh i just figured to put it here as it was alot of custom building being put together for the jeep but if the mods wanna move it, it dosent bother me any, i donno, :dontknow:

FKN MRK
10-18-2009, 09:48 PM
I've seen this thread for a while and really like what your doing.

As probably expected though, I do have one little problem, not with the build but with where you've posted it, and it's not directed to you as it is to the mods. There is nothing but jeep here. Yes it's fabrication and yes it's cool, but still all jeep. My 350 build thread was here and got kicked to the ford section cause it was a ford. It's got a cummins motor and mostly dodge drivetrain as well as many other parts from many other vehicles and a ton of custom fabricated parts too put it all together. I really don't care, but it's been bugging me a bit, so what the hell. Figured I'ld stick a foot in my mouth before I forget what toejam tastes like.

:dontknow: Some mods have too much time on their hands[15] :confused0006: I'm gonna see if I can find the thread you are talkin about and move it back;)

[cheers]


Darrin... Nice work bud[cheers]

Justin_B
10-18-2009, 10:18 PM
Sweet, looking good man[cheers]

kozak
10-19-2009, 05:37 PM
Right on man, thats looking great.

yummysweet350
10-19-2009, 08:26 PM
looks good nick.....sexy time in hottt jeepoh yeah

keegs
10-19-2009, 09:48 PM
awesome work guys, can't wait to drool over it in person, lol,

Happypants
10-21-2009, 10:47 PM
got some more work done on it tonight heres some more pics in no order
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5956.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5955.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5954.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5952.jpg
drivers side half door is done, both half doors are done, just need to install the "poppers"
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5950.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5949.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5948.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5947.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5946.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5945.jpg

Candy
10-21-2009, 11:11 PM
:party0010: :party0010: woot cant wait till its done :party0010: :party0010:

happy penis

'Balmer
10-21-2009, 11:52 PM
Likewise!!! Looking sweet so far, great work!

North49
10-22-2009, 08:42 AM
The projects lookin' pretty good Nick!

lornix
10-23-2009, 12:32 PM
Wow! This is coming along great! Can't wait to see the final results [cheers]

dari
10-23-2009, 12:48 PM
wow now that a lot of work looks great so far.

Happypants
11-03-2009, 12:07 AM
Not too much of a update, no pics but pretty much got the back all wrapped up, going to start primering tommorow, drivers side half door pretty much done, drivers side rear quarter panel is cut and new steel welded in, all cleaned up, still got rear floor to do and a bit more welding on the roof of the cab, other than that just a assload of wiring left to do, still trying to figure out wat color to paint it and what taillights were going to use, also picked up a 9500 pound warn winch for the front, can't wait till the toy run though, looks like it'll be there


Nick

Tunabomber
11-03-2009, 12:25 AM
im in the same vote for paint :dontknow:

D-Ass
11-03-2009, 06:23 PM
you both should paint them pussy pink because you still can't follow me!!!!:D

Metal Mulisha
11-03-2009, 10:33 PM
Ya thats some good work alright, saw it first hand the other nite, Darin your doin some great work.....now can you fuckin hurry up so you can start my exo already. No rest for the Wicked. I got a flat of AMP'D waiting for ya.

D-Ass
11-03-2009, 10:38 PM
tight ass!!!!:D

Happypants
11-03-2009, 11:15 PM
fuck and i thought i was a slave driver, damn brett, and darin, fuck you hahaha, pussy pink, you cunt!!!

Happypants
11-03-2009, 11:19 PM
got the back all primered up, darin also started cutting the holes for the rear tail lights and stuff, heres pics

http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/paint1.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/paint2.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/paint3.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/paint5.jpg

D-Ass
11-03-2009, 11:22 PM
well I was close I guess it is more of a seamin orange












shit bad spelling "salmon" orange :D

B
11-03-2009, 11:30 PM
closer to yeast infection orange isnt it ? ...looks as good as noneck on Halloween ...[22]






[f]

Happypants
11-03-2009, 11:34 PM
closer to yeast infection orange isnt it ? ...looks as good as noneck on Halloween ...[22]






[f]



fucking rights!!! i looked good oh yeah oh yeah

C-Dog
11-04-2009, 12:36 AM
Right on Nick the XJ Trucks looks good for sure

Darin did some nice work....But kets keep you anlooking good on halloween for another thread [36] [cheers]

Evan the Blue
11-04-2009, 01:44 AM
Looks bad ass mang can't wait to see it out on the trails [cheers]

Metal Mulisha
11-04-2009, 10:05 PM
closer to yeast infection orange isnt it ? ...looks as good as noneck on Halloween ...[22]






[f]

Fuck aint that the truth.

hoser
11-04-2009, 10:10 PM
mmmeeeehhh!!!!! its a fucken jeep[16]






kidding its looking tight...[36]

just bought a bender nmyself the other day cant wait to do some tighter trails wit u soon:happy0045:

Happypants
11-04-2009, 10:32 PM
fuckin rights homes!!! cant wait to put the cage to its full useage haha

Apathy
11-05-2009, 05:56 AM
the only thing i see, is that the color screams

PICK ME PICK ME PICK ME.

and is one reason why my rig is no longer yellow.

Happypants
11-05-2009, 02:58 PM
silly yankee, its just primer, still trying to figure out what color its going to be, needed to get it primered so we can turn in around in case its raining, that way i dont end up wire wheeling the entire thing before i paint it, lol,

silly yankee..:D

Apathy
11-05-2009, 05:19 PM
silly yankee, its just primer, still trying to figure out what color its going to be, needed to get it primered so we can turn in around in case its raining, that way i dont end up wire wheeling the entire thing before i paint it, lol,

silly yankee..:D

i kinda like the color.


and what the hell happened to Noneck?

Happypants
11-05-2009, 06:11 PM
he disseapeared,this is his ego now........

harleyfatboy99ca
11-05-2009, 06:20 PM
Nice work [cheers]

Tinker
11-05-2009, 07:36 PM
R U done yet?:D

Moondog
11-05-2009, 07:50 PM
I think you should paint it cerise

Happypants
11-06-2009, 11:55 PM
I think you should paint it cerise

cerise? is that cherry? :confused:

Happypants
11-09-2009, 10:50 PM
just a bit of a update for everyone, not much done but some, got all the lights in the rear, top LED is tail/stop/signal light then bottom is a clear white back up light, and then got the side markers in as well, not too much left to do, just a bunch of wiring, floor and some other little things left to touch up and tidy up then after the toy run we`ll be onto the exo, coming together nicely, got the roof all welded up as well, never experienced something that stinks so bad as burning paint on the top of the roof, :p a few pics,
nick

http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_5993.jpg

Moondog
11-09-2009, 11:12 PM
cerise? is that cherry? :confused:

Nope it's this color Nick
http://www.silkweddingdesigns.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/c/e/cerise_heart_foil_balloon_10.jpg
I bet you won't do it....

D-Ass
11-10-2009, 12:16 AM
Nope it's this color Nick
http://www.silkweddingdesigns.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/c/e/cerise_heart_foil_balloon_10.jpg
I bet you won't do it....

I will !!!!:D

poostang
11-10-2009, 12:08 PM
looking good buddy nice to see shes gettying close bet your itching to get er out

redman
11-10-2009, 12:10 PM
Nope it's this color Nick
http://www.silkweddingdesigns.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/c/e/cerise_heart_foil_balloon_10.jpg
I bet you won't do it....


look a ballon on the build thread [15]

Candy
11-10-2009, 12:46 PM
are you boys done yet??!!!

Trailjunkie
11-10-2009, 01:07 PM
nope not even close

Apathy
11-10-2009, 02:42 PM
should be done about the same time as Bryson.

vajayjay
11-10-2009, 02:55 PM
looking good buddy nice to see shes gettying close bet your itching to get er out


No I think the itching is from something else:D

D-Ass
11-10-2009, 06:48 PM
should be done about the same time as Bryson.

don't worry I am busting that bitches balls as well:D

Candy
11-11-2009, 09:26 PM
oh ballz... i better get to come see that xjt soon its pretty bad when im getting seperation anxiety... haha

zackman
11-11-2009, 11:41 PM
looking good i gotta see this thing one day

nbrowser
11-11-2009, 11:45 PM
oh ballz... i better get to come see that xjt soon its pretty bad when im getting seperation anxiety... haha

You got seperation anxiety...imagine how Nick feels....his baby ain't gone out in a while....I bet he has the shakes BAD !

Happypants
11-12-2009, 07:43 PM
You got seperation anxiety...imagine how Nick feels....his baby ain't gone out in a while....I bet he has the shakes BAD !

kinda i just keep stealing other peoples trucks and getting them stuck, and dave, dont tempt me with the pink, after all i did find flamingo pink paint at canadian tire the other day :D oh yeah

Moondog
11-12-2009, 07:50 PM
Doooo it you know you want to

nbrowser
11-12-2009, 08:34 PM
kinda i just keep stealing other peoples trucks and getting them stuck, and dave, dont tempt me with the pink, after all i did find flamingo pink paint at canadian tire the other day :D oh yeah

heh I considered stealing someone's rig then I smarted up and took the Heep out for a joyride last night.....damn fine 4x4 :)

Happypants
11-12-2009, 09:21 PM
heh I considered stealing someone's rig then I smarted up and took the Heep out for a joyride last night.....damn fine 4x4 :)

its very simple, if the truck is running and the door is open, its fair game, jj and reble know this rule very well, :D

Trailjunkie
11-12-2009, 09:33 PM
flamingo pink sweet. itl look good on yah buddy

dari
11-12-2009, 09:40 PM
do it
do it
do it

nbrowser
11-12-2009, 09:57 PM
its very simple, if the truck is running and the door is open, its fair game, jj and reble know this rule very well, :D


Remind me to shut the motor off and take the key anytime I hop out next time I'm out with you.....lol

D-Ass
11-15-2009, 10:24 PM
here are a few up dates from this weekend

floor is going in welded to the "uni" rails then their will be a strip welded in to cover the gap between the two panels

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_5948.jpg

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_5950.jpg

2 seater now baby!

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_5947.jpg

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_5952.jpg

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_5953.jpg

and a pick of pulling some cable

http://i40.photobucket.com/albums/e241/bangmax/nicks%20build/IMG_5951.jpg

dam the toy run is coming quick!!!!!:run away

Trailjunkie
11-15-2009, 10:26 PM
fereakin nice buddy

ROBO
11-15-2009, 10:34 PM
dam .. looks nice .. needs too be pink tho..

regulate34
11-16-2009, 07:50 AM
looks great
maby now you can keep up
hope she is ready for toy 09
if you need help with some electrical or just bitch grunt work just ask
kuz you got 6 dayz hommie

littlegreen
11-16-2009, 09:39 AM
you guy's keep adding all that tin to that truck she is going to be a tank.

your going to need my motor in that truck to move it around.

but it look's good.

DIRTDIGGLER
11-16-2009, 11:39 AM
SMALL BLOCK :confused0006::rolleyes:[36]

Tinker
11-16-2009, 01:47 PM
Stroker, Stroker![36]

Lazybaka
11-16-2009, 01:56 PM
I'd rather be cummin then strokin!

Apathy
11-16-2009, 02:14 PM
500 cu Caddy..

say no more

Candy
11-16-2009, 02:16 PM
awesome work darin

Happypants
11-16-2009, 03:13 PM
you guy's keep adding all that tin to that truck she is going to be a tank.

your going to need my motor in that truck to move it around.

but it look's good.

are you offering up your motor rob :D cause in a heart beat i could use 800HP :D

SMALL BLOCK :confused0006::rolleyes:[36]

Stroker, Stroker![36]

next winter its getting a 4.7L stroker and a atlas 5 speed along with the 1 tons and 5.13 gears


wicked work darin, floor looks sweet, see ya tonite possibly

B
11-16-2009, 10:34 PM
here's a little inspiration ....http://www.pirate4x4.com/forum/showthread.php?t=837632

Happypants
11-17-2009, 01:16 AM
here's a little inspiration ....http://www.pirate4x4.com/forum/showthread.php?t=837632

nice, hes even got the same tires as i have :D lol, thats pretty close to what i wanna do minus the rear tailgate bars coming down

Apathy
11-17-2009, 06:06 AM
i wouldn't waist my money on a 4 or 5 speed. 3 will be plenty.

you your 2:1 for snow wheeling
your 4:1 for crawlin
and your uber low for getting out of trouble.

Happypants
11-17-2009, 06:05 PM
:( but i wanna................... lol, i dunno we`ll see when the time comes,


did some work yesterday, pretty much just wiring left and paint, its going to be black for the toy run, might keep it black, dont know we`ll see, going to work on it tonight, and tommorow, and the day after, and the day after and the day after:D

Happypants
11-18-2009, 11:47 PM
bit of a update, all the welding is done, just gotta finish up the wiring tommorow, should be picking up a rear tj seat for the back pretty quick,just gotta finish primering it and some undercoating here and there and it will be ready to roll!!! cant wait!!! heres some pics,
floor
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor1.jpg
couple of goofballs
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor2.jpg
finished up tailgate, the wet spot is wet paint for the access panel
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor3.jpg
front of the floor
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor4.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor5.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor6.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor7.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor8.jpg
fancy trailer converter thing for the brake/tail/signal light
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/floor9.jpg
[cheers]
nick

Cheese eyes
11-19-2009, 12:26 AM
annnnnd still a jeep!! [16]







just kiding, looks good! [cheers]

nbrowser
11-19-2009, 09:00 AM
Oh look....the trailer converter box I told ya about many moons ago !

Nice work guys, can't wait to see the finished product....then again, as like xtremeyj's now not much Heep left rig...it'll probably never be done.

hoser
11-19-2009, 11:26 AM
looks good....no exo:dontknow:

Honky
11-19-2009, 11:28 AM
Looks good....lets go wheelin

epic3
11-19-2009, 12:09 PM
looks like a scout 800

MikeWild
11-19-2009, 12:28 PM
looking good. Lotta work there that's for sure. Does that tailgate rattle at all while driving?

dari
11-19-2009, 12:29 PM
aren't you done yet

C-Dog
11-19-2009, 01:07 PM
Looking good thats for sure question though how much weight do u think you added buy doing all that boxing in ........?

And then your going to cage it as well isnt that allot of extra weight

Happypants
11-19-2009, 02:31 PM
looks good....no exo:dontknow:

just got the body work finished so i can take it for the toy run, after i get my fix its going back in for the exo, so no real wheeling this weekend, just gonna go put around

looking good. Lotta work there that's for sure. Does that tailgate rattle at all while driving?

nope, there is 3/4" thick weather stripping all around it, auctually pretty quiet,

aren't you done yet
will be tonight,
Looking good thats for sure question though how much weight do u think you added buy doing all that boxing in ........?

And then your going to cage it as well isnt that allot of extra weight

on the trailer it weighed 2000 exactly, we have prolly added a few hunderd pounds thats for sure lol, after adding the steel the rear has dropped 1/2 a inch, with the exo, prolly a full inch, but thats ok, its getting linked in the back next winter when the 1 tons go in and a inch higher than it sits right now will be its final ride height with either 40s or 42s depending on how much i save up over the summer,happy penis

lornix
11-20-2009, 02:16 PM
Damn! One of the nicer XJ / truck mods I've seen. Good stuff [cheers]

Happypants
11-21-2009, 03:54 PM
Jeeps done, loaded on the trailer, just gonna clean it up and paint a few spots we missed

Vastier
11-22-2009, 11:22 AM
Looking good man[36] Did you beef up your pivot points?

Josh_M
11-23-2009, 03:03 AM
Looks awesome guys

dirka dave
11-23-2009, 12:28 PM
Should have just bought a 2nd jen 4runner.[16] [16]


dirka dirka !!

:D

thrillbilly
11-27-2009, 09:08 PM
goddamn this thing is noticable now! :P
just saw iton the trailer and turned my head instantly.
props to daren and nick, very very sexy xj (and i dont really like xjs..!)

Happypants
11-28-2009, 12:04 AM
just did a little bit of tube work tonight, nothing worth posting pics

Muddy Heep
12-01-2009, 08:38 PM
yes it look good but it's a cherokee and you no

Happypants
12-01-2009, 09:41 PM
got new disks brakes on the rear now :D

Trailjunkie
12-01-2009, 10:18 PM
eeewwww you got discs on you rear . sounds painfull

Happypants
12-02-2009, 12:10 AM
was pretty simple install, the part that hurt the most was the 300 dollar bill for the pads,rotors,brakelines,gearoil and calipers

thrillbilly
12-27-2009, 10:28 AM
any new photographs

Apathy
12-27-2009, 06:54 PM
let me get this straight,, yuour putting tons in this next year, but just spend 300 bucks on rear disk breaks for it?

next time you wanna burn money, just send it to me.

Explorer guy418
12-27-2009, 08:07 PM
nice lookin build so far dood post more pics!

Happypants
12-27-2009, 11:20 PM
let me get this straight,, yuour putting tons in this next year, but just spend 300 bucks on rear disk breaks for it?

next time you wanna burn money, just send it to me.

When I do 1tons these diffs are going in my sisters xj, that's why I did it, plus my rear brakes fell apart when I took the drums off, so why not?

nice lookin build so far dood post more pics!


Haven't been doing any more building right now cuz of Christmas and such, trying to find a bender so I can start doing my Exo but not having any luck unfortunatly....

skuzzy
01-04-2010, 07:27 PM
nice looking truck now man way to go..........when i finish my new project well have to go out and have some fun........

Happypants
01-09-2010, 03:19 PM
got the new decals finally for my jeep along with my other sticker,

http://i918.photobucket.com/albums/ad21/nicksxj/IMG_1081.jpg
http://i918.photobucket.com/albums/ad21/nicksxj/IMG_1082.jpg

thanks brett,

will have some pics up soon of my front bumper,

Bogger4life
01-10-2010, 06:57 PM
haha im diggin the font on the Whitetrash decal Nick, Same font we use for our Whitetrash Motorsports decals

Happypants
01-10-2010, 08:40 PM
nice,

Happypants
01-22-2010, 07:38 PM
got my front bumper done finally, its blue right now though cause we had no other paint in the shop for the moment hahah, working on beadlocks right now, hopeing to have them done and on asap, still got a assload of shit to fix on it, tie rods, steering box all that shit,
http://i918.photobucket.com/albums/ad21/nicksxj/phase%204/IMG_0018.jpg

dirka dave
01-22-2010, 08:29 PM
Where are you putting the rainbow sticker ?


[35] [f]

Happypants
01-22-2010, 09:17 PM
same place you put that jeep emblem i gave you focker!


















up your ass beiotch!

Troy
01-23-2010, 12:18 AM
wtf? i think your gonna have to cut the ends off that bumper, thats a total tree and hip catcher.

where did you get those decals made and how much?

Happypants
01-23-2010, 01:03 AM
wtf? i think your gonna have to cut the ends off that bumper, thats a total tree and hip catcher.

where did you get those decals made and how much?


The bumper sticks out that 1.5" fir the Exo to mount to as I'm doing custom high clearance fenders/flairs and making my own front clip with tubing along with a stinger tying it all together with new HID lighting in the front, just thinking ahead that's all, and as long as I don't catch my hip or anything on it then it dosent bother me heh, also looking at the bumper from the front like in the pic it looks like it's just a straight peice of steel it's auctially bent around, the front and tucked very closly to the front end, had to do a bunch of relief cuts in the ends then bent it and welded it all back together, it's 1/4" thick 2x6


Metal Mulisha made the stickers for me, only took 4 months LOL,

thrillbilly
02-05-2010, 10:18 PM
hey nick any new pics of did i miss a thread somewhere? interested to see the stinger and any updates. jeep lookin good (besides the smurf of a bumper)

Happypants
02-05-2010, 10:20 PM
hey nick any new pics of did i miss a thread somewhere? interested to see the stinger and any updates. jeep lookin good (besides the smurf of a bumper)

Nah not really, taking my time and beating the piss outta it weekly, there will be some soon, if I had my fucking d60 then there would be more pictures but........

thrillbilly
02-05-2010, 10:25 PM
ill be done mine in ~2 months then ill be back on trails to see urs.
still no luck on ur d60 eh. fawkers. need to put next one in ur room lol.

Always broke
02-06-2010, 12:01 AM
Shouldn't the sticker read Whitedish





...Just sayin

Happypants
02-06-2010, 12:37 AM
Shouldn't the sticker read Whitedish





...Just sayin




NO!!!

Ginger Snaps
02-06-2010, 11:19 AM
nice suv...

theborges
02-06-2010, 02:29 PM
so we should call you blue noser now?

Happypants
02-06-2010, 09:58 PM
so we should call you blue noser now?

Call it whatever you want, at least mine is driveable, not sitting in the back yard on jackstands!!!

Happypants
02-10-2010, 10:26 PM
Got stinger put on today, fixed broken brake line,
http://i918.photobucket.com/albums/ad21/nicksxj/Mobile%20Uploads/IMG_6807.jpg


Got rid of the gay blue as well

SquirreL-E
02-10-2010, 10:33 PM
Man that's Cuuuuute! wheres its cheeks so I can pinch them? sure thats going to hold up? i predict, First tree/rock/truck you hit its going to bend back :D

UU
02-10-2010, 10:38 PM
Man that's Cuuuuute! wheres its cheeks so I can pinch them? sure thats going to hold up? i predict, First shopping cart/speed bump/light standard you hit its going to bend back :D


thats better:D

Happypants
02-10-2010, 11:07 PM
Man that's Cuuuuute! wheres its cheeks so I can pinch them? sure thats going to hold up? i predict, First tree/rock/truck you hit its going to bend back :D



Yea because it's really done!! Holy shit!! I still have more to do ya dumass!

SquirreL-E
02-10-2010, 11:20 PM
:D Why'd you paint it then?

Ps. my truck is on jack stands... hahaha

Happypants
02-10-2010, 11:24 PM
Because I would rather grind a bit of paint off to do welding rather than let it sit and get all rusted up, besides that blue was pissing me the fuck off!

SquirreL-E
02-10-2010, 11:45 PM
I Thought blue was a happier colour... I guess I was wrong... WHY DO YOU HAVE TO BE SO ANGRY! Jus' Asken'...

Happypants
02-11-2010, 08:44 AM
I Thought blue was a happier colour... I guess I was wrong... WHY DO YOU HAVE TO BE SO ANGRY! Jus' Asken'...

Because dumb ppl piss me off,especially dumb questions, hint hint :mad:

Apathy
02-11-2010, 08:50 AM
nick.. not to be a dick, but it looks too low. it looks like its below the hoot. the whole idea of a stinger is to protect teh front rad area in a roll over.

Happypants
02-11-2010, 09:02 AM
Nope it's above the hood, dun worry,

UU
02-11-2010, 10:00 AM
shopping cart handle height ?

Candy
02-11-2010, 07:51 PM
looks pretty sweet

xj-jamie
02-11-2010, 08:39 PM
MY bumper woulda looked better . It's still fs or trade (to anyone interested)



plus my stingers bigger:p
[cheers] [cheers]

Happypants
02-11-2010, 08:44 PM
Yea, well my dicks bigger!!

:D

xj-jamie
02-11-2010, 08:48 PM
I'm not about to ask to see more than your ass( which I saw on my maiden outing with fibc involuntarily)


But.........





BULLSHIT!!!!



No but seriously. Come buy my bumper it'll look a million times better I promise you.... It needs to be used....



What is gray the new blue?

Happypants
02-11-2010, 08:51 PM
Well if someone had sent me a pic like I had said over a month ago, I mighta considered it, but u didn't so, your loss,

C-Dog
02-11-2010, 09:10 PM
this is temporary right :dontknow:


122820

Happypants
02-11-2010, 09:25 PM
Nope,

C-Dog
02-11-2010, 09:27 PM
Oh ok


Still no front tow points as well eh yer weird just a little :D

Happypants
02-11-2010, 10:04 PM
I'm auctually waiting to get someore money and I'm getting some d-ring/shakle mounts that I'm gonna weld onto the front for stucks

xj-jamie
02-11-2010, 10:05 PM
Well if someone had sent me a pic like I had said over a month ago, I mighta considered it, but u didn't so, your loss,


And I told u to stop by u drove right by my place Sunday I also sai I don't have a computer just dang iPhone if I could figure pics out I wouldd I haven't posted a single pic on fibc yet dangit...


And no it's your loss when your getting a dff bumper made when someone else snags mine. And u see it and ask...:ballsmack


Just saying mang no love lost just woulda been sick on yo heep....[cheers]

Happypants
02-11-2010, 10:07 PM
Wtf!?! Whatever man, give it to me then!