PDA

View Full Version : otk steering suggestions


bcmaxx
09-16-2009, 12:33 PM
So, I wont be able to afford a d44 built for a while, And I have so much into the d30 at this time. I'd like to go Over the knuckle steering. Any suggestions on where/what to get? I will also need to relocate the track bar, I found a weld on mount kit, but what trac bar do I run? I have the hd re bar at the moment.Thanks for any input

Rubiconmike
09-16-2009, 01:01 PM
I saw this one on trucks the othere day.

http://www.jeepfan.com/reviews/review_retieflip.htm
________
Live Sex (http://livesexwebshows.com/)

Happypants
09-16-2009, 06:06 PM
dedenbear makes a d30 knuckle with d44 outters, basically, bolt the knuckle on using the d30 balljoints, then you gotta rape a gm 10 bolt for the spindals, and hubs as long as they are the smaller style spindals you can run either 6 bolt chevy polt pattern or ford 5-5.5 bolt pattern, and you will also have manual hubs instead, just need to get a different stub shaft which i think you can use the gm 10 bolt outter stub shafts as well, but then your rear axle will still be 5-4.5

m j
09-16-2009, 06:13 PM
10 bolt didnt have small spindles, the small spindle was early 70s half ton and jeep