PDA

View Full Version : Dodge stupidity


Honky
09-16-2009, 12:06 PM
Just doesn’t make sense to me. A simple thing like replacing a burnt out headlight. I bought two new replacement head lights and still not working. Had to take it to Dodge and they said I would have never figured it out….the stupid computer code needed to be reset and that will be $69.00

I guess when the headlight goes out there is an error code that has to be reset…how stupid is that?

Jeepnut
09-16-2009, 12:08 PM
thats about as stupid as you buying the dodge:dontknow:


stupid is as stupid does

B
09-16-2009, 12:13 PM
thats about as stupid as you buying the dodge:dontknow:


stupid is as stupid does


say's the guy thats payed for his chev 4 times over [f] ... [cheers]

Jeepnut
09-16-2009, 12:15 PM
:confused0006: ....dont you own a dodge to:D

Apathy
09-16-2009, 12:21 PM
stupid dodge's

dirka dave
09-16-2009, 03:20 PM
Next time let me know, I'll clear it for ya.


Did the code that says there is a "loose nut behind the wheel" go away yet ?



I'll bet it didn't.:fighting0071:

;)

Lynx
09-16-2009, 06:24 PM
My headlight burnt out and all was fine.

Ironman
09-16-2009, 07:41 PM
Kev probably fucked something up

mini
09-16-2009, 07:51 PM
it wasnt that the light burnt out it was a glich in the comp that needed to be reset

Trailjunkie
09-16-2009, 08:03 PM
freaking money suckin bullpucky.

zookiguy
09-16-2009, 08:52 PM
Next time let me know, I'll clear it for ya.


Did the code that says there is a "loose nut behind the wheel" go away yet ?



I'll bet it didn't.:fighting0071:

;)


do you have access to a star scan tool? I dont think a normal OBD tool can reset the BCM.

mini
09-16-2009, 10:16 PM
do you have access to a star scan tool? I dont think a normal OBD tool can reset the BCM.


what is a STAR scan tool? and the scanner that dirka has will do a bcm

Moondog
09-16-2009, 10:28 PM
Nice sig line! I wonder if its the same for the rear lites as well? I keep blowing drivers side brake lites

zookiguy
09-17-2009, 10:52 PM
what is a STAR scan tool? and the scanner that dirka has will do a bcm


star scan is the tool that Cummins made for the dodge programing.

If you search on ebay you can usually see them but they are pricey.

Murd0c
09-18-2009, 11:50 PM
http://cgi.ebay.com/ebaymotors/Chrysler-Dodge-Jeep-Starscan-Star-Scan-Diagnostic-Tool_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQh ashZitem2a0122539dQQitemZ180407653277QQptZMotorsQ5 fAutomotiveQ5fTools

D-Ass
09-19-2009, 12:22 AM
wait until one of you wants to put led tail lights in a dodge they have to run through a resistor other wise the computer dosn't see enough load and shuts all the lights off until the code is cleared [16]

mini
09-19-2009, 07:01 PM
thats because the entire lighting system works on reststance if the comp doesnt see enough resistance in the system it shuts it down thinking there is a problem, it is also how you get the "lamp out" light illuminated on your dash. it does the same thing if you put hid's in a ram

Always broke
09-19-2009, 07:03 PM
thats because the entire lighting system works on reststance if the comp doesnt see enough resistance in the system it shuts it down thinking there is a problem, it is also how you get the "lamp out" light illuminated on your dash. it does the same thing if you put hid's in a ramGo back to your Baby:D